Looks great. Now to do the door pulls, handles, and vent rings…
@TimBambu.Racing4 жыл бұрын
Been on my list of things to do for a while.
@TimBambu.Racing4 жыл бұрын
My gosh so many screws!
@HiroshimaSpirit4 жыл бұрын
More than you’d think, right?!
@TimBambu.Racing4 жыл бұрын
For sure!
@hendrikjan91164 жыл бұрын
niceley done. having the same problem, but i'm also looking to replace it with a more modern mazda 2/3 steeringwheel. but i've not have done enough research yet if it is posible
@John.Skelton2 жыл бұрын
THIS GIVES ME SO MUCH ANXIETY!😬 I'D BE SCARED TO ACCIDENTALLY SET THE AIRBAG OFF! 😬😅
@hypatos6713 жыл бұрын
I tried same rustoleum for my stock steelies. It sux. I will try reflective glow tape next.
@tobysaunders14624 жыл бұрын
Great video man! Think you need to do yours now? Neon pink I think...
@HiroshimaSpirit4 жыл бұрын
My car is my choice and I like the Momo how it is. Haha
@Gstunna-4 жыл бұрын
Did u let it dry for 48 hours. I used that glitter spray on my wheels and got a thumb print as well. But it needed to cure for 48 hours.
@HiroshimaSpirit4 жыл бұрын
I let it dry for like 48 minutes (lol Hyperbole, but still wasn’t enough to be “right”) because I’m impatient and didn’t want to park my car outside while this one was apart. I know it’s no fault but my own. It actually “self healed” quite a bit as it cured overnight. Can barely tell they’re there anymore.
@hectormacias6853 Жыл бұрын
Enjoying your videos, how can I obtain one of your decals for my ride. thanks
@HiroshimaSpirit Жыл бұрын
I don’t have anymore, sorry!
@danielsusco40324 жыл бұрын
Sorry this is unrelated, you seem to find some nice aftermarket parts. Is there a thermostat housing that is better than the stock plastic one available?
@HiroshimaSpirit4 жыл бұрын
Doubtful, as there is no real reason to make one. The housing the car comes with works just fine, so there’s no demand to improve it.
@DMRH69 Жыл бұрын
G'day from down under......... Did you guys get the 2-door DE Demio / M2....? Just curious watching all the mods you did to a 4-door M2 & wondering if the 2-door was available to you or was the 2-door a RHD only thing....
@HiroshimaSpirit Жыл бұрын
We didn’t get the two door, unfortunately.
@ttvv90 Жыл бұрын
The 2-door was available as LHD in Europe at least.
@crystalperez33143 жыл бұрын
Hi, I was wondering if you had any suggestions on how to improve the AC?
@HiroshimaSpirit3 жыл бұрын
I don’t. The system is known for being kind of “weak” for some people and fine for others. The a/c in both of mine has never left me wanting.
@mtinsb3 жыл бұрын
Question - since you have taken apart Mazda 2 steering wheels with and without the controls (audio and cruise ) in them - is it possible to install the touring controls in the sport steering wheel? Im hoping to ad some of the touring features to my 2013 sport like you did with the fog lights.
@HiroshimaSpirit3 жыл бұрын
No, you have to replace the entire steering wheel and airbag to get the controls, and at that point they won’t work without changing some hardware in various places and flashing the ECU to Touring spec. It’s more trouble than it’s worth.
@cnmurch4 жыл бұрын
I’ve always unplugged the connectors from the airbag inflator and left it attached to the horn/airbag assembly. Any reason for doing it the way you did?
@HiroshimaSpirit4 жыл бұрын
I didn’t want to risk messing up the connectors. Truthfully, I don’t know how to disconnect them and I didn’t want to wait for an answer. lol The write up I cited does it that was as well, fwiw.
@cnmurch4 жыл бұрын
Cool. The little black retainer clips pop up but not off (I usually use a small flat-heat screwdriver) and the yellow and orange plugs pull right out. Eliminates any chance of too much tension in the wires. Not sure which is the “right” way, but clearly both work.