REKLUSE RADIUS CX INSTALL - YAMAHA YFZ450R

[@ononewheel7]

Time stamps are in the description 🤘

[@travisnunya4641]

Hey brother ? for you I am going going order some rims and tires for my yfz450r and thinking about getting the hiper tech 3 double beadlock is that a good rim and what kind of tires and size of rims should I get

[@ononewheel7]

I just did a video on wheels/tires check it out. I run hipers and love them along w gbc tires and tire balls its a killer combination.

[@travisnunya4641]

sweet I will order your same set up do you like the deal beadlock carbon fiber or would you go aluminum single beadlock

[@ononewheel7]

No the dual beadlocks are the best i prefer the hiper carbon wheels over aluminum. If you damage an aluminum wheel you have to replace the whole wheel. With hipers its a 4 or 5 piece wheel you can fix.

[@travisnunya4641]

Thanks just watched your video thanks brother I will order them tired and rims tonight

What a great idea using the oil bottle as a pan,, Love it, Good job thank you

[@ononewheel7]

Works killer i also use it sometimes when draining the oil vs bringing out my huge oil pan and to drain the coolant as well.

[@thegoose1008]

Great video John. Way better than Rekluse’s video. I’m installing the same clutch in a yfz450r myself and the problem I’m having is when I get enough free play gain the quad wants creep to much. When I get it to where it doesn’t creep much I don’t think there’s enough free play gain. Instructions said 3 holes past the mark counter clockwise and I’m currently only one hole past. I’ve gone both ways clockwise and counterclockwise 4 holes each way and this was the best for the most free play gain without it creeping out the garage.

[@ononewheel7]

Thanks man A little creep is normal. Did you do the break in procedure then recheck?

[@mchevownr]

Amazing video sir! Great explanations and lighting. I appreciate your experience when installing the clutch process. Thank you

[@ononewheel7]

Thank you. Have a new one coming soon so stay tuned for an updated vid with the radius cx clutch and basket upgrade.

[@ArizonaKid]

Man like slipping on a pair of shoes . Good job and that will help a lot of viewers . See ya on the next one my friend

[@ononewheel7]

Thanks for watching 🤘

[@ArizonaKid]

@@ononewheel7 loyal fan 😉

[@ononewheel7]

🤘

[@johnbruzzi4381]

Love your videos. Think I'm first

[@ononewheel7]

Thanks john You are first 🤘

[@johnbruzzi4381]

Good morning John do you use neck brace?

[@ononewheel7]

I dont

[@tmysty]

great video Thanks!!!

[@ononewheel7]

Anytime man

[@Team2Gils]

I love the rekluse clutches, they make a big difference for sure.

[@ononewheel7]

Big time man! A must have for xc racing!

[@ATVGBulgaria]

LOL John, you do this easy as kid eating 🍦. Excellent job 💪🏻💪🏻

[@ononewheel7]

Thanks asen

[@nappinj12]

Well you got me to buy one. It is nice on trails. Specially when there is no direction. Got sxs- dirt bikes, atv flying around All over. Nice not killing quad, slamming on brakes. Clutch plates are thin though. I have to get a 09 basket now. 14 is supposed to be bad.

[@ononewheel7]

Nice man. Ya grab a 09/10 basket or an aftermarket one.

[@BradMason2014]

Great video as always!

[@ononewheel7]

Thanks man

[@quadintheuk8870]

Great video John 👌 You make everything look so easy Years of experience,can’t wait till your next race buddy 🏁💨💨

[@ononewheel7]

Thanks man! Round 3 this weekend 😬😬😬

[@sarondiesel588]

That break in part is ridiculous…. Thanx for showing us how to install this though.

[@ononewheel7]

Ya its not too bad Anytime man

[@700rRaptorLife]

I wanna definitely upgrade my clutches...great video john 🔥🔥🔥

[@ononewheel7]

Thanks man! This is a solid setup they offer normal clutch kits as well!

[@luisito0392]

Very informative video 👍🏽

[@ononewheel7]

Thanks man!

[@2strokelover93]

Hey John! Does it matter what order the plates and steels go😅

[@ononewheel7]

Yes

[@ononewheel7]

Most clutches will start with a steel and end with a steel

[@ronaldwalters4715]

What year yfz 450r rekluse radius cx clutch kit would work for my 2024 yfz 450r?

[@ononewheel7]

There newest version with the exp 4.0 will work with all year yfz450r’s

[@ronaldwalters4715]

Thanks I appreciate it man. my wife is mad cause she can't ride manual and wants to ride it so I think she'll learn the semi auto better than the manual

[@robertwilson5747]

I wanna try those clutches

[@ononewheel7]

They are sweet!

[@NastyNaz1000]

👍🏾Nice

[@ononewheel7]

Thank you!

[@boosted915tx]

Brother is this a lockout clutch? I only hillshot or drag my R and was looking for a lockout what do you recommend?

[@ononewheel7]

This is an auto clutch so basically in gear the quad will not stall. You still have to shift like normal and you can use the clutch still like normal but you dont have too. As far as lockouts i have no idea man never used one so.

[@boosted915tx]

Thanks brother I’ll check out direct drive or slingshot lock out that’s the only 2 I know about

[@0brien1420]

Hey John what kinda wine do you or your wife or does anyone in your group drink wine I'll bring some this Sunday let me know thank you

[@ononewheel7]

My wife likes wine i really don’t drink it!

[@0brien1420]

Okay what kinda I bottle for glenora winery and I would like to bring her some wine when we come watch you on Sunday

[@ononewheel7]

Thanks for the wine sorry we had no service at the track 😩

[@lixszdil2301]

Hey man so I got a 2021 450r and I was replacing the clutch basket to get rid of the “bad springs” and now my clutch isn’t engaging any suggestions?

[@ononewheel7]

I would honestly pull it back apart and redo it. Something might be off. Sometimes the basket does not fully seat inside the shaft when you put it in spin it while pushing in.

[@lixszdil2301]

@@ononewheel7 alrighty man thanks a lot ! Have a blessed day!

[@ononewheel7]

@@lixszdil2301 anytime let me know if you find anything.

[@jc4570]

Are you in RI?

[@ononewheel7]

Yes

[@travisnunya4641]

Hey just did this swap it seems like stock clutch cover and seal they had some rubberized sealant around it and I bend the stock gasket so I need a new one.? After I removed my stock clutch yours looks different then mine did you change your clutch housing If that's what you call it and why and should I change it as well

[@ononewheel7]

Im running the 2009/2010 oem basket/washer w the rekluse radius cx clutch hope this helps.

[@travisnunya4641]

@@ononewheel7 oh that's why. should I change mine or leave mine stock and where did you get it at if I need to change mine

[@ononewheel7]

What year is yours? There are issues with the 2011-current clutch baskets they can explode at any time and take out your engine

[@travisnunya4641]

@@ononewheel7 oh shit my year is 2020 450r se

[@travisnunya4641]

@@ononewheel7 hey just got that clutch put in went good besides I destroyed my oem stock gasket had a bunch of rubber stuff on it. Anyways after I got it installed I checked my play and get a small movement like 16th of a inch and in first gear it want to creep forward some if no one is on the bike is that normal?? If not how do you fix it also I can't start the bike unless it is in neutral I didn't think it mattered

[@jefftrumble4768]

Great video. Your videos always seem to cost me money🤔

[@ononewheel7]

Thanks man! Hahaha fun is expensive 😬😬😬

[@hardendurobosnia17]

Please help, can i use the stock plates with those sleeves? On KTM TPI... do i need to machine the basket

[@ononewheel7]

The basket sleeves are designed to use with the rekluse torque drive plates only.

[@travisnunya4641]

Where are you located at I have 2 2020 se one for me and daughter I don't trust alot of shops around my area and would like you to install them I have 2 of these clutch I also have a fmf full exhaust and custom fuel intake and a vortex icu I think it's called

[@ononewheel7]

Im in rhode island

[@travisnunya4641]

Damn I'm indiana awesome racing bro

[@iissaacc71]

Where can I find this Rekluse Rocky Mountain says only for dirt bike or dual sport any help would be greatly appreciated.

[@ononewheel7]

Contact rekluse directly! Ask for dan tell him i sent ya! [phone]

[@iissaacc71]

@@ononewheel7 thank you gonna get the funds together to get this I think it will improve my whole race.

[@Factory43R]

Have you ever ran motorex cross power 4t 10w50? Or know if it’s any good?

[@ononewheel7]

I have not u run blud lubricants use my code and try some you will love it.

[@Factory43R]

@@ononewheel7 used the code and got 5 quarts. Great discount! Thanks! What oil filter do you recommend or does it not matter?

[@ononewheel7]

I use the hiflo filters awesome man let me know how you like it

[@Factory43R]

@@ononewheel7 sorry for all the questions. I could pick your brain for days. New to all this!

[@ononewheel7]

Ask away man its all good.

[@kingkracker1998]

im not sure if id want a recluse, atleast not yet! maybe if i was racing AND my skills were higher! lol. i need to get alot more seat time. still getting that truck together, but should be ready for week end road trips very soon! been working 10 hrs every day, not gettin home till 8p. makes it hard to get shit down at home

[@ononewheel7]

Nice man! Rekluses aren’t for everyone after i broke my wrist(clutch hand) i started using these it was the only way i could ride for almost two year before it stopped hurting me and ive just stuck w them ever since!

[@kingkracker1998]

@@ononewheel7 oh ya. i like em, they seem sick, specially for racing. but i think id be using it as a crutch. i just need to get my skills up! plus i depend on my engine braking alot!

[@ononewheel7]

You still can have engine braking just have to rev the throttle!

[@kingkracker1998]

@@ononewheel7 oh, lol. i thought the recluse totally eliminated the engine braking! lol

[@ononewheel7]

Nope so once the machine drops to idle it will freewheel but once you rev it it will engage!

[@travisnunya4641]

Hey im going to give this oil a try what weight of oil do you use in your yfz450r

[@ononewheel7]

I run 15/50 thats what they recommended for my build/racing you can ask them as well make sure to use my code 🤘

[@travisnunya4641]

@@ononewheel7 your code what is that will they give me a discount or something

[@ononewheel7]

Yes watch at the end of all my videos for like 7 companies for discounts

[@travisnunya4641]

@@ononewheel7 thanks brother you saved my ass 55$

[@ononewheel7]

Awesome man 🤘

[@kuminator21]

So I see the order in which they go in, but do I have to worry about how exactly the friction plates are placed? No specific notches to indicate?

[@ononewheel7]

Nope frictions can go anyway those markings are just from manufacturing!

[@yfztrx2914]

Is it common after the clutch is installed that the lever has more then the thickness of a nickel? Do i need to adjust the cable ?

[@yfztrx2914]

Its just very loose

[@ononewheel7]

With any new clutch you will need to readjust the lever and cable slack. The yfz calls for like 1/8” of free play in the lever.

[@RJR-9603]

Great videos! Are you using the stock clutch basket? I picked up my new 21 SE this weekend and I was told to convert to an older clutch basket or after market basket.

[@ononewheel7]

Thanks! I do run a stock oem basket but its a 2009-2010 style along w the washer between the basket and center hub! The new 3 rivet baskets are know to come apart at any time so!

[@RJR-9603]

@@ononewheel7 Thanks for the reply! Is the conversion a straight forward swap? What else is needed besides the 09-10 clutch basket?

[@ononewheel7]

Just the basket/washer Its pretty easy to do once you remove the clutch pack u bolt the center hub nut slide the hub out Then the washer Then the basket And then install the new basket/washer/hub/nut!

[@RJR-9603]

@@ononewheel7 Sweet! Thank you! Keep up the awesome videos!

[@ononewheel7]

Anytime man!

[@Factory43R]

Is there anything you don’t like about the clutch?

[@ononewheel7]

Nope

[@fluffynugs5142]

Have you ever used Hinson clutch basket I bought the basket alone and seems like two steel pressure plates did not want to go in smooth I have to jam it in

[@ononewheel7]

Years ago i had a hinson clutch on my kfx i never had any issues! I am using oem 2009-2010 yamaha baskets!

[@mr.mathews6485]

In your opinion what year yfz was best?? I know that’s a broad question. Just trail ride no racing. Been riding a trx 450r but considering the Yamaha.

[@ononewheel7]

Well back in 2009/2010 you had two options with the yfz Yfz450x narrow woods model Yfz450r wide mx model Now you can only get the r version so if you want to narrow it up you have to spend some 💵💵💵 Any 2014+ yfz450r is awesome in 2014 it got a plastics design change and a small increase in compression A slipper clutch and some added emissions BS

[@mr.mathews6485]

Thank you!!!

[@ononewheel7]

Anytime

[@justinb.7545]

what model number is the rekluse radius cx? Also did those basket sleeves come with the rekluse pack?

[@ononewheel7]

Its just the radius cx for my yfz450r Everything you see here comes with it!