Reloading 12ga on the MEC 600JR MK V part 2.wmv

[@cdcropper]

I will try to get one up as quickly as possible. But its not a hard thing to do on the MK5 there is a bolt on the base remove it and reinstall it in the upper hole it will move the coulomb up 1/4 inch. before you do I would recommend you deprime and reprime all of your empties before you move on to the next stage. then raise the coulomb and lower the rammer tube 1/4 and proceed as normal.

[@extreemslayer]

Can you post a video about reloading 10 gauge shells?

[@cdcropper]

I will try. I do load 10ga but its really a lot like loading any other shotshell. The problem is there are very few choices in wads for the 410 and 10ga shells. So I recommend going to Ballistic products and buying various thicknesses of fiber wads for these shells to compensate for the loads of shot powder and hull design. The idea is to create the correct volume inside the hull to allow it to compress and to crimp properly.