Remount a flatbed 7.3 idi race truck build ep.11 building stronger flat bed mounts

Hit like and subscribe for more idi videos. Until next week, check out these other #idi #6.9 #7.3 #diesel #bricknose #bullnose videos!
What to look out for when buying a used 6.9 or 7.3 idi diesel part 2
• Buying a 6.9 or 7.3 id...
What to look out for when buying a used 6.9 or 7.3 idi diesel part 1 • BUYING a Ford 6.9 or 7...
3g alternator upgrade in 6.9 or 7.3 idi diesel ford
• 3g alternator conversi...
7.3 idi engine wiring harness color codes and sensor locations
• 7.3 idi diesel wiring ...
The truth about idi injector return line kits
• The truth about inject...
Wiring you high idle to a manual switch.
• IDI diesel manual high...
Old timers trick injection pump repair in a bottle
• 6.9 7.3 idi diesel inj...
How to bleed air and prime a 6.9 or 7.3 idi diesel fuel system
• Bleeding air out of th...
Replacing power steering lines in my 6.9 idi
• 6.9 idi ford truck pow...
Idi coolant flush and refill
• 6.9 or 7.3 IDI diesel ...
Ford shower head fuel pick up to fuel sump
• Fuel sump install bull...
Ford fuel selector valve replaced with brass 3 way valves
• ford fuel tank selecto...
3g alternator swap to upgrade your old externally regulated alternator • Ford 7.3 idi diesel 1g...
Facet electronic lift pump installation
• 7.3 idi facet Duralift...
Where to plumb in and hook up aftermarket gauges to an idi engine (oil pressure, water temperature sender locations) • 7.3 idi diesel gauges ...
How to change 7.3 idi glow plugs • 7.3 idi diesel Ford e3...
7.3 idi race truck build part 1 tearing down the crash test dummy
• 7.3 idi diesel race tr...
7.3 idi manual glow plug button how to • 7.3 idi diesel glow pl...
7.3 idi fuel heater delete mod • 7.3 idi diesel ford fu...
High torque starter in a 6.9 or 7.3 idi diesel • Ford 6.9 idi diesel du...
Reviving a 6.9 idi diesel by hotwiring the fuel shut off solenoid and doing a manual glow plug button • 6.9 idi diesel crank n...
Basic wiring to hotwire and start a 6.9 idi from under the hood
• NO KEYS NO PROBLEM! Ho...
Basic wiring to hotwire and start a 7.3 idi from under the hood
• Start a 7.3 idi diesel...
Diagnose and test a heater defrost system that is not coming on
• Troubleshooting and re...
Heat only blows on high DO THIS!
• Heat only blows on hig...
Check out these videos for more information on my #wmo #blackdiesel centrifuge set up.
5 ways to save $ setting up a waste oil centrifuge
• Waste oil to black die...
5 hidden costs to setting up a centrifuge
• Waste oil to black die...
First batch of black diesel ran through my wvodesigns centrifuge
• waste oil to black die...

[@nothim2896]

Whoever mounted that flatbed DID NOT know what the heck they were doing. That was downright dangerous. Thanks for showing us how you fixed it.

[@worthshop]

Ya, I have never seen a bed mounted like that. Should be nice and sturdy with the u bolts I added. That is how I have always seen them mounted. Thanks for watching.

[@JDfromtheFEE]

You inspire me to keep on wrenching with my truck man I swear the knowledge you put out TO ME is immense bro

[@worthshop]

Glad to hear it, thanks fir being a part of the chanel. Comments like this keep me pushing forward, putting out content.

[@barjanweb1877]

That's not work,,, that's therapy!!

[@worthshop]

Definitely peace of mind knowing it is securely mounted and not going to come flying off on the race track!

[@DirectCurrent4u]

Nice job cleaning up the Flat Bed! It looks a lot better! Keep up the good work and look forward to the next video!🙏🏻👍

[@worthshop]

Thanks! Getting it closer and closer to race ready. But seems like I keep finding more problems too. So the process has taken me longer than I ever expected it to.

[@DirectCurrent4u]

@@worthshop I totally understand that. Every project I do takes twice as long as I expected and usually cost twice as much. That's just Murphy's Law. One thing I learned a long time ago is that I don't get in a hurry and take my time that way I don't have to do it twice.👍

[@charlesflaco7976]

Your intro music reminds of the TV called redwood

[@worthshop]

Puddins fab shop uses the same music, I liked it. Only so many good catchy tunes in the youtube free music library, so I started using it too.

[@simpleman4224]

Great job buddy!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@worthshop]

Thanks 👍appreciate you being a part of tge chanel.

[@mattleonard5268]

What makes a 6.9 idi racetruck?

[@worthshop]

Strip it down, add a rollbar, add door reinforcements, and go racing according to our local track rules. Your track may differ.