Remove STUCK Drill Bit - on Keyless Chuck

Easy tutorial on How to remove a stuck drill bit from your drill machine! We will go through 3 options to remove it, but ultimately only one was enough. Enjoy!
🔴 Subscribe for more tips just like this: / @howtoirfo
This video is NOT sponsored (some product links are Amazon affiliate links which means if you buy something we'll receive a small commission).
Tools used in this Project:
Mini Screwdriver Set:
amzn.to/3G2u2P2
BOSCH „Bulldog“ Rotary Hammer:
amzn.to/3W9aXjw
Spray used in this Video:
amzn.to/3WoAvci
DEWALT Wrench Set:
amzn.to/3W6mGzC
If you enjoyed this video, please like and subscribe to the channel!
Thanks for watching, and be sure to watch more of our DIY videos.
* * * * * * * * * * MORE VIDEOS * * * * * * * * * *
🎬Watch our most recent videos: www.youtube.com/@how.to.chann...
How To Remove Stickers from Mirror or Glass
► • How To Remove Stickers...
How To Inflate Car Tire With Gas Station Air Pump
► • How To Inflate Car Tir...
How To Disassemble and Reassemble the Mechanical Pencil
► • How To Disassemble and...
How To Cut Glass WITHOUT a Glass Cutter!
► • HOW To CUT Glass WITHO...
#howto #drillbit #drillchuck

[@trishyways1064]

Hvala ljudino, izvukao sam burgiju nakon dva dana nerviranja. Sve isprobao i haman odustao, kad izleti tvoj video. Živ bio!

[@howtoirfo]

Tooo majstore 👍👍 drago mi je da ti je video pomogao, znam kako sam se ja namucio pa hajde reko nisam jedini sa ovim problemom sigurno 😁 Sve najbolje

[@Pewis]

tried so many different techniques i had found on google, but nothing did the trick until i came across this man; a hammer, and some WD-40. Legend.

[@howtoirfo]

Yuuuup, it works wonders 😁 👍 👍

[@CbrF4i600cc]

Channel locks works everytime

[@csxraie4078]

Thank you.. after 30mins.. of thinking he wouldnt work.Bang it popped out.. subscribed.. saved me money.

[@howtoirfo]

Wuhuuu 😁😁 Glad I could help and thx for the sub 👍👍👍

[@arthursmith643]

Awesome video. Nice clear voice steady clean video and no yes I said no crappy music in the background. You encouraged us by saying Don’t give up. Thanks much.

[@howtoirfo]

Awesome! Thank you, I appreciate your comment, its nice to know it helped someone! 👍

[@arthursmith643]

Arrrr💩 was very funny 😂😂😂

[@howtoirfo]

😂😂😂

[@5L1X1X]

Brilliant video & I love you English I could listen to you all day and I'm British by the way 😅

[@howtoirfo]

I'm so glad to hear that my English is understandable enough, your comment really means a lot, thank you, will keep on working on improving it, thx 👍

[@chrystalhardman6766]

Thank you!! Mixture of all 3 then finally popped!

[@howtoirfo]

Great job! You’re welcome 👍👍

[@ginghamt.c.5973]

My Dear Friend..! We did it TOGETHER!!! I watched the video and achieved same result exactly as you did! It's been emotional! Thanks a million.

[@howtoirfo]

YESSS! 😁 I’m so glad you did, I sure do know how painful was it to have this drill bit stuck inside. You are very welcome, no go and drill away everything my friend 😁😁👍👍👍

[@loopedchris2231]

Thank You so much! Mine has been stuck for well over a year I think and thanks to your video, it's free!

[@howtoirfo]

Great to hear that! I know how it feels when you can’t use your tools longer time 😁 Thank you for your comment! 👍

[@peterhuntington7361]

Fixed it in 5 minutes. Thanks 👍

[@howtoirfo]

Excellent, glad it helped 👍👍👍

[@noemiszabonekanizsainoth4457]

Your instruction was successful! Thank you this useful video!

[@howtoirfo]

Excellent, glad it helped! Thank you for your comment! 👍

[@user-nv9ze1ye9f]

Very good Video it helps,i had the same problem with stuck drill Bosch and i fix it watching this video many thanks.

[@howtoirfo]

You're welcome! Glad it helped 👍👍👍

[@mihalislymperakis2422]

I was right in this situation my friend. Now it is solved after watching the video! Thanks

[@howtoirfo]

Great! Glad it helped! Thx for comment 👍👍

[@honeybadger3408]

Thanks for the pointers. 👍👍

[@howtoirfo]

No problem 👍 thx for comment and support 👍👍

[@roynaidu2327]

Penetrating oil and tapping down with a hammer and screwdriver worked like a charm!

[@howtoirfo]

Yes nice, it sure does do wonders 😁 👍

[@maync1]

Yeah, mate, great presentation! Will go and do as you say. Thank you.

[@howtoirfo]

Thank you, I hope you do it successfully 👍👍

[@gilgalvezdj]

Thank you bro, fix it quickly by following up your instructions

[@howtoirfo]

You're welcome, glad it helped 👍 thx for comment!!! 👍

[@sebastianmereu1769]

It works ! Thank you !

[@howtoirfo]

Excellent, glad it helped 👍👍👍

[@raaaabert]

Thanks. I was about to buy an entire new drill as my chuck was so sticky... I've really forgotten the raw power of WD40 ⚒️. You've saved me 180 dollars! 💸💰💵

[@howtoirfo]

WD40 and a little bit of hammer power 😀I'm glad this video helped you, go use that 180$ for some other cool tool 😄😄😄

[@jimtheophilou9872]

Thanks. My Makita drill has been stuck for months. Watched loads of you tube vids to sort it, used force, adjustable spanners in opposite directions, WD40 etc but nothing would budge it. Who'd have thought a gentle tap on the 'grippers' would have sorted it in 2 minutes.

[@howtoirfo]

😁😁😁 Great to jear that, glad it helped. Thx for sharing your experiance 👍👍👍

[@stuartohara]

Drill bit’s been stuck for over a month, was on the cusp of going out to spend £40+ on pliers to try and free it. 3 squirts of WD40 and a few taps of the hammer and it was like opening a carton of milk! Thank you! 🙏🏻

[@howtoirfo]

Haha good stuff 👍👍👍 glad it worked!!

[@abuskeleke3378]

Wow, that was easy, thanks

[@howtoirfo]

Glad it helped! 👍

[@leebobb8204]

Worked a treat ty !

[@howtoirfo]

Excellent!!! Drill away 😁😁

[@kaibilbalam7151]

Combo tricks n patience 👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽✊🏽

[@howtoirfo]

Exactly so, little time and it will be done 👍👍👍

[@aquinaoficina6986]

I`ve been trying to unstuck a drill bit from my Milwalkee for days. I´ll try your tips out. Thanks!

[@howtoirfo]

This sure did fix my drill bit, be sure to try it. Good luck! 👍

[@noikho6397]

I hammer with another screwdriver to get a loose and it worked. Thank you for your help.

[@howtoirfo]

Yup that work also, glad it helped 👍👍👍

[@podfuk]

Well done!

[@howtoirfo]

Thank you 👍

[@cikgujangarcamistik3537]

Thanks for sharing

[@howtoirfo]

You are welcome, thanks for watching 👍👍👍

[@jamesbounsall5478]

Well done

[@howtoirfo]

Thx 👍

[@craiposucpatacrepe2909]

Good job guy 👍🏼 i am in trouble like you i'm going to try again with the magic WD40 THANKS

[@howtoirfo]

You can do it! If WD40 alone doesn’t work then try to tap it a couple of times with something like I did in my case. Good luck 👍

[@jon11978]

Thank you very much for the tip. WD40 and screw hammeeng works!!!

[@howtoirfo]

Glad this helped you 👍👍👍

[@jeffhalbo96]

I HATE keyless chucks, they either don't tighten enough or they tighten too much! What was wrong with key chucks? I NEVER had problems with them! I am going to change ALL my drills back to key chucks.

[@howtoirfo]

I agree, it is much easier with key chuck, you decide how much to tight it and it is much easier to release it. Key chuck is my choice also 👍

[@user-ys6yx3qf6x]

thank you!

[@howtoirfo]

Welcome bro 👍👍👍

[@najboljitito3684]

Toooooo Irfo kraljuuuuu

[@howtoirfo]

Idemooooo 💪💪💪 😃😃

[@tunnel-stash]

Do not grip any adjustable wrench or pliers to the hex nut around the jaws that grab the bit. The material is softer than the ideal hardness of the adjustable wrench and pliers so it will give and immediately strip and dent under moderate pressure. And do not hit the jaws with anything these KZbinrs have shown. Because that material too is softer than the material used for screwdrivers and whatever. What is actually tougher than the other parts is the chuck itself. I had a chuck that was stuck even worst than anything shown online. I really thought I trashed my drill. But I used a cheap 10 inch Husky brand curved jaw locking pliers from Home Depot. I used the lower end of the drill handle as leverage and got it to turn and open the jaws again. I didnt notice any significant damage on the pliers either.

[@CbrF4i600cc]

Lol this guy sounds like Count Dracula

[@howtoirfo]

😁😁 thx

[@user-ne8fe1vb4f]

good

[@howtoirfo]

Thx 👍

[@anarago]

Thanks sooooo much for having posted this video!…I had exactly the same problem without a solution. I sat in front of your video and copied exactly everything you did and voila!! Good job! Well done! And thanks! 😅

[@howtoirfo]

Thank you for your comment! This is exactly the problem I had often and I decided to make a video about it. Luckily it is really helpful to people! Glad you found it useful! 👍👍

[@mantequillaop8262]

Thanks, man, it worked, I used the handle to grip the chunk and use my manly powers 🤣

[@howtoirfo]

Jup, that will do the job, I had sore hands day after, when they stuck they are stuck 😂😂

[@elhilamohammed9510]

Yes I Can

[@howtoirfo]

👍👍 go for it!!!

[@munkhorgiliderbold4183]

Ty Edit hit the 3 piece of metal that was holding the bit and it got loose

[@howtoirfo]

Jup, that works 👍👍👍

[@attilabori4734]

Was the reason of this that you put an SDS bit into the standard (3 jaw/non SDS) chuck?....

[@howtoirfo]

No, the reason was too strong concrete wall 😂 I pushed my drill bit too hard into the wall for too long and everything got stucked, but I menaged to fix it 👍

[@attilabori4734]

@@howtoirfo thanks for your response strong💪 man... I was more lucky than you (or weaker lol)... I lost the central screw from the chuck (old metabo 3 jaw standard) and literally the drill bit just slid into the threaded bore... WD40 helped, missing screw replaced...

[@howtoirfo]

@attilabori4734 yeah I know, sometimes a simple little screw can do so much trouble. Glad you was able to fix it all 👍

[@ournewbulgarianlife4097]

Thanks for the video: little advice: SDS Drills don´t belong in normal chucks, thats why it got stuck.. ;) Use normal masonary drills and it won´t be stuck ..

[@howtoirfo]

Heh nice catch 😊 Yes, I have used SDS Drills all the time in this drill machine, and it usually works just fine, but sometimes it does get stuck. I also recommend normal masonry drills, it is way easier with them. Thx for your advice 👍👍👍

[@ournewbulgarianlife4097]

@@howtoirfo Usually nothing would speak against it. The issue is the grooves in the SDS drills. They are usually symmetric (2 grooves). Most chucks are asymmetric (3 claws) . The result is always one claw sitting half in the groove making it jam due to uneven pressure. Been there ;) Still thank you for your work!

[@howtoirfo]

@ournewbulgarianlife4097 Yeah, and the worst thing is when you use a big long drill, you can see how it rotates in a loop, not a circle but a loop because of this third groove that doesn't fit nicely. But hey, gotta make the hole somehow 😁 👍👍👍 Thx likewise.

[@emtavano]

Mine got unstuck after just the hammering part. 😂 Thanks!

[@howtoirfo]

Nice work, you are a lucky guy, I had to work on it for 15 minutes 😂😂

[@HelloKittyFanMan]

What is "VD-40," Irfan?

[@howtoirfo]

Just a normal WD 40 spray, you can buy it in any hardware store 👍

[@HelloKittyFanMan]

@@howtoirfo: Then why are you saying "VD-40"?

[@howtoirfo]

@HelloKittyFanMan Mistake in my “perfect” English 😂 I meant to say W, sorry if I confused you 😊

[@HelloKittyFanMan]

@@howtoirfo: I wasn't asking you about "perfect" anything; just that one thing. Besides, it's not really about English when it's just one letter. Anyway, just curious.

[@jennijulander5139]

What do you do if the chuck opens just fine but the drill bit is shoved deep down inside? My son tried to drill hard wood with the wrong drill bit and now the bit is impacted deep inside the drill. No amount of pulling with pliers makes it budge. (He's 8, he didn't know any better 😭)

[@howtoirfo]

He at least tried his best 😊 he will learn it is nice that he tried 👍 I think you need to disassemble the chuck, to remove it from the drill, then it will be easier to find the solution I think. Just type your drill type and add how to remove the chuck or how to disassemble the drill and you will find it on KZbin. Good luck 👍👍👍

[@socallaghan2012]

Oh my god, i only bl--dy did it, thank you so much, just text everyone to tell them lol.

[@howtoirfo]

Haha thank you brother, glad it worked for you 👍👍👍

[@MalcolmJames-sg3zg]

Just imagine if you had arthritis in your hand , thats where the key chuck wins

[@howtoirfo]

Yeah, this method definitely doesn't work if you have arthritis in your hands, gotta get creative. I hope that key Chuck works nicely for you 👍👍

[@kells1784]

I've arthritis and carpal tunnel, so game over for me 😔

[@MalcolmJames-sg3zg]

yer I had carpal tunnel in 1 hand , but it sometimes cleans up on its own , so it might not be game over yet , Take care

[@MalcolmJames-sg3zg]

yer I had carpal tunnel in 1 hand , but it sometimes cleans up on its own , so it might not be game over yet , Take care

[@kells1784]

@MalcolmJames-sg3zg I have carpal tunnel in both hands, and it isn't getting any better, only worse. Doctors want me to get surgery on both hands.

[@nekomajin88tvxlusive25]

My dewalt got stuck

[@howtoirfo]

Did you managed to fix it? Have you tryed this solution?

[@Lady.x44]

dude you just need to wear work gloves and twist it 😂

[@howtoirfo]

Tried that one also, but maybe it will work on some other stuck drills, should try anything! 👍

[@hotstick12]

Then chuck the useless thing away, who has time for this palaver when working.