Remove your DaVinci Resolve SNAPPING FRUSTRATION with this PRO TIP

[@WQLFY]

Snapping is an essential tool. but it should never ever have affected the IRON playhead. The fact that not only this happens but that it cant even be disabled separately is utterly bizarre and the biggest leap of frustration for anyone moving from more expensive editing software. Snapping can already snap clips to other clips. there is no reason whatsoever for the playhead to have to be sandwiched in between.

[@lipsach]

Exactly!

[@ivokoimecs]

I think sometimes that they tried to make editing possible without using keyboard at all. Otherwise how do you explain existence of selection/trim and the third never used one modes. Not speaking about confusing and awkward kb shortcuts ... 😀

[@quickpickle]

I agree and now version 19 is out and they STILL haven't fukin added this feature of disabling snap to play head. It's mindblowing how the edit page is basically ignored when it comes to updates.

[@imanuelthiele6935]

An 8 minute tutorial which explains the “N” key exists 👍

[@frankywashere]

lmao yeah

[@JulianBrutus]

absolute waste of time

[@traagenstein]

thanks

[@MadfishFPV]

Yeah I briefly stumbled on a few keys the other day but skimed over them but now can't find the important keys!

[@CiaranGallagher1]

Would definitely appreciate the answer right at the start as well rather than almost 2 minutes in :D

[@BuongiornoEgitto]

this is literally the reason why i still edit in premiere. i thought I was the only one having this issue. resolve should see this.

[@quickpickle]

Davinci really needs to come out with an update which adds features to the edit page to give options that can be turned on and off for fine controlling on snapping.

[@henrikbellgardt]

these are exactly my thoughts, I get really frustrated of having to do so many little workarounds, which feel so clumpsy to be having to do.

[@robtmohr]

If you zoom all the way in and have "snapping off", moving a clip still snaps the track from tick point to tick point. I want to micro-move an audio track to sync it to a slate marker on a video track. I don't have SMPTE options available with my video or audio recording devices.

[@Epd3mik]

YES! Same here. Im considering to delete Davinci Resolve just for this problem..

[@sladefx]

I am finding the same issue. So is there no way to disable that? This video implies that the icon should tell DV to turn it on or off. So snapping can be turned off but only at higher "resolution"?

[@shivamoon108]

Thanks! Very helpful. However, what I was hoping to find out was, if there's a way to set the snapping to some arbitrary grid... ? That would be helpful in some circumstances.

[@Epd3mik]

Im getting extremly frustraing over here. When im zoomed all in and try to move! Its still snapping. I dont want to move the clip +00:01 i want to move it +00.001 second. I try to time a music video with the audio..

[@501studiosphotograph]

I'm having a snapping issue even when the magnetic timeline is off. I'm trying to line a clip up to the beat of the song. Even zoomed way in, the clip snaps to the top lines above in the timeline. The clip either is too short of the beat or past it. How do we make these fine adjustments?

[@beckmyre]

You probably figured it out already but that is happening because of your video framerate. Audio does not have a framerate so you can make micro adjustments to it's placement, but video does. Most video you'll deal with is 24 frames per second. That means for each second of time, you have 24 evenly spaced points where a video clip can be placed. This sounds like a lot but when comparing to audio you won't be able to the micro edits to perfectly match the beat. To make video edits line up more perfectly with the beat, you will need to increase the framerate of your project. Probably to at least 60 frames per second. That will give you more points in time to get closer to the beat. Still won't be as exact as audio but it'll get you close. That being said, you can totally use 24fps and still edit to a beat. It won't look perfect on the timeline but as long as you put it on the closest frame to the real beat, most people aren't gonna see any difference.

[@CRAZYGAMEZ-j3z]

My question was answered in the first 2 minutes

[@normietwiceremoved]

I wish there was a setting to turn down the aggressiveness of snapping.

[@AlexCameron-Depiqd]

So, did you have that issue with SNAPPING in Davinci Resolve and was the video helpful? I'd love to know, are you a *"snapping ON"* or *"snapping OFF"* editor?

[@BuongiornoEgitto]

great video, i literally thought i was strange for that. i literally don't use davinci for this reason

[@wanderinggstars]

my problem is when i cut a clip while zoomed out, it doesnt always cut where the cursor is, its possible to turn that off?

[@vivekjoshi115]

Don’t you have a comprehensive course on DaVinci Resolve 18; the one you have shared in your description is for DaVinci Resolve 17

[@AlexCameron-Depiqd]

Hi Vivek, good question! So I'm a little behind on the website updates. The course was originally created for and in DaVinci Resolve 17 but the course for Davinci Resolve 18 is not going to look massively different so I've taken the decision to update things so this course will be The Beginners Guide to Davinci Resolve and then we'll update the course with any new sections relevant to Davinci Resolve 18 free of charge in due course. Does that help at all?

[@DoctorMcFarlandStudios]

I have a slightly different issue. Even with snapping turned off the playhead still move according to the tick marks in the ruler so I can't place the playhead exactly where I want to to make an edit.

[@-snprym1683]

I noticed this change when updating from 17 to 18. In resolve 17 the playhead would not snap to the tick marks in the ruler. Have you found a way to turn this off in resolve 18? Im considering downgrading to resolve 17 again.

[@DoctorMcFarlandStudios]

@@-snprym1683 I have not found a way yet. I may have to email the company for further assistance.

[@-snprym1683]

@@DoctorMcFarlandStudios i already downgraded lol. Resolve 18 didnt last an hour on my pc

[@DoctorMcFarlandStudios]

@@-snprym1683 I never had 17 and have only used 18. Is there an option to download 17 from the website?

[@-snprym1683]

@@DoctorMcFarlandStudios yeah the old versions are still available for download on their site. But version 18 projects are not compatible with 17, so its only usefull (for you) when creating a new project. I still had my version 17 backups

[@WeldersFSC]

Yeah the playhead still snaps either before or after the end of my clip in the Edit page, with seemingly no way to get it to the in-between. Coming from Nuke + AE there's just so many fundamental small issues that are really making this software an absolute pain in the arse to use.

[@andygray64]

OMG... Temporary Snapping. Genius!! Thank you for sharing 👍

[@ivokoimecs]

Playhead snapping is one of those stupid confusing things in DR, along with selection/trim mode and awkward kyboard shortcuts like ctrl+shift+[], and del/backspace unintuitive confusion. A lot of confusing and frustrating things in DR.

[@paulywolley]

Very handy tip, thanks! I mostly have snapping on and would click on the icon to turn it off when trying to be precise. Being able to temporarily disable it will save so much time.

[@AlexCameron-Depiqd]

Thank you for watching. Glad it helped! You're right though, saves a lot of time.

[@CharlesCalleja-p9g]

good afternoon thanks for helping out in problems. I come from premier pro but just two months ago I have switched to Davinci resolve 18. my question is how to delete one audio or clip without the other move ?? thank you charlie

[@charlespatt]

Both. Sometimes I want to find the end or start of a section, sometimes I want more detail. I forgot to consider the keyboard shortcut. That will help!

[@hollsound]

Hello! Could you tell me, how can I disable the marker snapping in DR? Thanks is advance.

[@WanderingMonk]

Thank you. I am doing the same way.😊

[@dameetray831]

How do you turn off snapping in the video monitor? Like when it snaps onto the grid

[@iqbrazil]

In DaVinci Resolve 19 pressing "n" disables the snapping tool but it doesn't avoid snapping, it's like the feature is not functioning anymore.

[@robert_mitchell]

For some reason, when I want to temporarily toggle the snapping feature, as opposed to turning it on and off, the magnet icon flashes and the clip I'm moving is kind of jittery. It's very annoying and doesn't make the process work well. To be clear, I have snapping off but now I want to move a clip and have it snap, so while moving the clip, I hold down the n key and it flashes and give very strange behavior in the timeline while moving the clip.

[@smartphonevideography]

Thank you so much for this very useful tip👍 It has literally driven me crazy😊

[@RichbergEnt]

Need to move entire clip. Even with snaping off, it always snaos to frame. I need to move clips in between frame start and end points.

[@ChrisSpice]

Very helpful, thanks! Since you mentioned the keyboard shortcut (which I have mapped to another key), it’s becoming muscle memory to switch it on and off for different purposes. For weddings I have all my culled footage on a timeline so it’s off for scrubbing between that footage and back on again for placing it on the actual timeline for editing. This is probably the only thing I prefer Premiere for but I can get used to it for sure.

[@MichaelBrinson]

Unfortunately the temporary-disable trick doesn't work with markers. (ie: If I begin dragging a marker and while I'm dragging I press "N" to disable snapping, then the snapping is disabled, but it doesn't turn back on when I stop dragging the marker).

[@nagruvajse]

You didnt explain about other snapping problem, when snapping is actually turned off, and we have two tracks with clips, as soon as i delete a clip from the upper track, DaVinci brings the clip from the lower track, closer, at the place of the upper clip. That is annoying af//

[@yadude101]

I turned the magnet snapping function off and it still snaps. Hit the magnifying glass as high as it goes (to focus in) and it still snaps, it does not move the track head or audio/video files freely - it snaps it to every frame. if i hit "n" & turn snapping function on , it snaps audio video files & track head to every other frame - am I missing something?

[@devcowpb]

If I understand your concern correctly - this is not possible to move video clip forward or backward by a fraction of a frame. You have for example 30 fps, so you can't place a cut in between frames (say 29,5 frame). You are limited to 30 cuts per frame.

[@chekfv]

I can’t add a marker to the clip anymore how do I fix this

[@quickpickle]

Is it possible to disable the snapping playhead while not disabling snapping on clips?

[@AlexCameron-Depiqd]

Sadly no. Snapping is on for all or off for all. Would be handy though although I find just tapping the ‘N’ key really quick.

[@quickpickle]

Yeah, i find it tedious to press N constantly, hoping davinci makes a solid update for us timeline editors... 18.5 just came out but no luck still.. :/ @@AlexCameron-Depiqd

[@LeeHarris]

Nice. Generally on and with this tip even more so.

[@onety-one9087]

This video typifies a good Davinci Resolve tutorial video. That is, a simple, well explained way to get around some idiotic default setting in Davinci Resolve. I don't need even understand the point of snapping the play had in this context, but thanks for showing me how to stop it. 😅

[@sammythebull116]

wen i hit snap of it still on no matter what i try its always on any other suggestions how to get it off?

[@mixchief]

@Alex Cameron Nice tip! But it doesn't seem to work in Fairlight with audio clips?

[@fredschenk_VVD]

Great tip. I prefer have snapping on. The n-tip,is great for single time changes.

[@AlexCameron-Depiqd]

Thanks for your response Fred! Really appreciate you taking the time to watch and comment.

[@jmac2050]

5:25 drag clip and disable snapping with N key

[@oodoodoopoopoo]

I'm wanting to use snapping in the keyframes panel of fusion and can't figure out how. Regardless, thanks for this video. I learned that while dragging I can temporarily disable snapping with the hotkey. 👍

[@nscaledelights]

Thanks for the video Alex snapping was driving me nuts. Im glad I found your video I prefer to have it off.

[@alexeimuravsky]

Do you know if I can have video clips snap to the border of my black frame when I am using the transform tool to move them from their initial positions in the timeline viewer (edit page)? I rather not do the tedious work of making sure every clip is exactly within the frame and not bleeding out of it, if I can. I can't seem to find a solution for this yet.

[@jibulissan]

Is there snapping in preview window??

[@jamesaidanking5235]

Tip finally available at 5:48 ... TL;DR: Press N.

[@Art-FX]

I would like to add that in the same way you can temporarily switch between the selection mode and the trim mode.

[@lukecerwinske2719]

Still having troubles. If you're zoomed all the way in it still snaps to the 10th

[@AdamSzarmack]

Snapping should be looked at as a “both” and not an “either or” setting. While editing I essentially have a finger ALWAYS resting on the snapping keyboard shortcut and I am constantly switching between on and off. It has significantly increased my ability to edit quickly.

[@AlexCameron-Depiqd]

Great point! Thanks for sharing and watching the video, Adam

[@quickpickle]

Hmm im not sure, personally i would like if the playhead wouldnt snap when moving it around on the timeline. Its like that in premiere and its easier to deal with lots of clips like that.

[@lipsach]

I disagree, If the playead do not snap as in premiere, you almost never have to turn snapping off. For precise editing, you just move the playhead were you want your clip to be edited, and drag to it. But in resolve your playead also snaps, so you must turn on/off snaping all the time.

[@elysiangrowth]

01:30 is the 5 seconds u are looking for. TLDR: press N to toggle snapping

[@VintageRetrospekt]

They still haven't fixed auto trimming when clips get inadvertently moved around. So sick of missing footage because the clips cut themselves down because something else got dragged over. A start would be to allow us to lock a clip, but we don't even have that feature. And this is coming from the paid Fusion version. This is really sad piece of software.

[@Rumeaa]

You absolute saint

[@BrynnBernsdorf]

Thank youuuuuuuuuuu

[@thetinmansheart]

Like EVERY audio editor, snap should be adjustable to 1 frame, 5 frames etc. Simple.

[@inqogneeto]

Moving a LAV sound file even AFTER clicking N to 'unsnap' STILL SNAPS..!! Alex if you are really Pro teach that one please

[@LightspeedTutorials]

hold on, I was cutting without any snapping at all with (N) disabled, but not it clips to frame a gain. I can't cut audio without pops! But I could, i swear!

[@efieli]

it still sucks.

[@Saturday-Knights]

Press N.

[@martysender5539]

More confused than b4 I saw this...

[@cezmikardas]

😊

[@davidrogers1393]

You are an excellent instructor, but sometimes you're going somewhere, and I don't know where you're at.

[@winstudioproduction]

05:25 - 98% video here

[@realchristopher4334]

Whoa, such a 'long' clip only to explain how to disable that thing. Someone even says/said this does not explain another snapping issue. Understandably long video is to fulfil KZbin's criterion in order to earn money.

[@erikdavis9064]

Another YT video that takes 6 minutes to say a simple 30 second tip. More annoying than that "aggressive snapping" problem in DR.

[@MediaWebservice]

You want a 30sec tip? Look for another channel and don't leave a comment here Mr. Wiseguy 😏

[@erikdavis9064]

@@MediaWebservice I didn't say I was looking for 30 second tips. I said you gave a 30 second tip and took 8 minutes to do it.

[@juliemoore2700]

Total oap novice in computers and editing

[@jeroenrotty]

Hey Alex, first time on your channel - thanks for this vid! - it was recommended from @DarrenMostyn - first week dabbing into Resolve and there is so much to learn! But I like it so far!