Removing a Stuck Crank Dust Cap

  Рет қаралды 4,785

The Velo Collective

The Velo Collective

3 жыл бұрын

This dust cap was stuck as the allen bolt hole had become rounded, making it impossible to remove by normal method. Drilling two holes in the dust cap was the best solution to releasing the cap and turning it so it could be removed.
Lots more at: www.thevelocollective.com

Пікірлер: 1
@kylejacktucker
@kylejacktucker 6 ай бұрын
Mines rounded any suggestions
Remove Cranks Without A Crank Puller
10:52
RJ The Bike Guy
Рет қаралды 1,5 МЛН
Removing a Very STUCK Bottom Bracket (Square Taper)
6:25
DanyoSports
Рет қаралды 78 М.
CHOCKY MILK.. 🤣 #shorts
00:20
Savage Vlogs
Рет қаралды 17 МЛН
Llegó al techo 😱
00:37
Juan De Dios Pantoja
Рет қаралды 61 МЛН
A little girl was shy at her first ballet lesson #shorts
00:35
Fabiosa Animated
Рет қаралды 17 МЛН
Ultimate Garage Shelving Build! FREE PLANS!
3:21
Ana White
Рет қаралды 410
HOW TO REMOVE STRIPPED OR STUCK CRANKS IN 5 MINUTES!
12:26
D2 WrenchWorks & DIY
Рет қаралды 58 М.
Using an Impact Wrench to Remove a Crank Arm Bolt???
6:47
Clint Gibbs
Рет қаралды 17 М.
Crank Type Identification
6:46
Park Tool
Рет қаралды 1,1 МЛН
Remove a square tapered crank arm using a Dremel tool.
6:17
Nathan Miller
Рет қаралды 476
Shimano Square Taper Bottom Bracket Removal Guide
12:53
Free To Cycle
Рет қаралды 357 М.
CHOCKY MILK.. 🤣 #shorts
00:20
Savage Vlogs
Рет қаралды 17 МЛН