Removing Broken Cab Mount Bolts - Ford Super Duty

[@micheldionne5882]

Aluminum foil can be used as a quick heat shield. Just place a piece in front of the plastic part to protect it. Thanks for sharing your knowledge.

[@DanielJaegerFilms]

Great advice, thanks for sharing your knowledge as well!

[@landondavid5773]

So I’m screwed if I don’t have a torch? I’m trying like hell to push that nut away from the opening so I can put a new one in. I already flush cut the bolt with grinder and after banging on it with crowbar the nut is wedged pretty good. Guess I’ll just keep bangin lolol

[@JB-nf8nk]

Those bolts have Loctite 242 on them so heat them up first - water should barely sizzle on top. You can put a 22mm socket, I think, on top of this mount through an access hole you'll see if you remove the wheel well liner, so you don't have to break the clip, if you do, use a stainless washer, no need to make your own. You hold the 22mm clip hard up top while your buddy slowly turns the hot bolt with breaker bar from the bottom, no problem. Done a lot of these... Oh, the others have carpet above them, so be careful of how hot you heat them, but those usually don't break and they come out easier, even when they do break.

[@Ioang40]

Great video and detail! Did you replace the mounts with S&B ones ?

[@DanielJaegerFilms]

Yes, used the S&B silicone mounts. The ride is a little more stiff, but you can tell the mounts will last much longer!

[@becplumbing660]

Do you still have your ford excursion

[@kajlerdog628]

No he sold it

[@MrHermangv]

About to get ready to do mine , i feel like its gonna be double the work, am hoping they just overtorque i can get away with just loosing up a bit and get rid of the clunking

[@swashington942]

Dude where's the dump truck update?

[@sabrenamcmichael2271]

Did the exact thing you did great minds think alike lol

[@GarzaDiesel]

Just finished this Job. Those front bolts are the worst!

[@biggie6085]

where the grand marquis 97?

[@kajlerdog628]

He just listed it on facebook marketplace he is selling it

[@biggie6085]

@@kajlerdog628 no man..☹️

[@davidgosnell5901]

Just take out the head lights just done my 2008 f250 . then bend a 7/8 wrench slid it in and if you still have problems put in small pry bar and get someone to hold the wrench and use a cheatet bar on rachet . too much heat will melt radiator

[@matiascuevas4176]

Do you remember me your old subscriber

[@elia2649]

No

[@matiascuevas4176]

​@@elia2649 yes

[@matiascuevas4176]

I subscribed 2 years ago

[@elia2649]

@@matiascuevas4176 that's super cool bud

[@mair815]

Glad to see you are still filming and sharing. Just watched your kzbin.info/www/bejne/f5OZaWdpaNVpgK8 and now I can fix the door chime in my 2008 E350 Super Duty van!!! THANK YOU!

[@omarzowila]

Where’s the Excursion?

[@kajlerdog628]

He sold it

[@omarzowila]

@@kajlerdog628 damn, I really missed that Excursion, especially since it has been in his family since brand new

[@yowsing]

can i have a shout out plsssss