Wltoys A979 Brushless Upgrade

[@TonysRcTechboom]

I might convert my A959 to brushless, thanks for all the Links, amazing upgrade build video my good friend, I really enjoyed every single minute 👍😁👍

[@a-ztube]

Thank you so much my Friend apriciate so glad to hear that ✌️🏽☺️ I hope to make more videos like that in the future 😉

[@atomic2903]

this youtuber is sooooo underrated

[@a-ztube]

Junior Gonzalez thank you very much my Friend appreciate that 😍👍🏽

[@sharulazuan8517]

Hi have a question why only right side rear and front running not all 4 wheel running. Diffrential problem?🤔🤔

[@a-ztube]

Hey mate as you can see at about 14mins in this video and in the Drift tyre upgrade video all 4 wheels are turning 😁👍🏽 Have a nice day

[@benkeight4314]

is there nothing to protect the gears at the back

[@a-ztube]

Nothing buddy 😉

[@ayebee1207]

I am enjoying this build. I have same type radio receiver. Any problems with antenna close to metal and reception from transmitter?

[@a-ztube]

Hey my Friend you're very welcome 😉 👍🏽 thank you very much ☺️. No never flysky radio is the best for the price really love it. I now upgraded to the flysky fsgt5 so you're also able to drive receiver with gyro absolutely amazing. Stay safe ✌️🏽 😊

[@bullryda5953]

Thank you. My new retirement hobby.

[@a-ztube]

You're very welcome and congrats to your retirement enjoy buddy ☺️🙏

[@bullryda5953]

Where’s the coffee option?

[@a-ztube]

@bullryda5953 hey mate didn't open the " buy me a coffee option" 😁👍 Only possible with my PayPal account to donate for the channel www.paypal.me/AZtube1 ,But no need to thats what's the channel for 😉 🫡🫶 have a nice weekend ahead and stay safe

[@bullryda5953]

Can you recommend a good servo motor? Thanks. My truck does hairpin turns to th right but an almost nothing to the left.

[@Das-Veilchen-X]

Do you perhaps have a video where you can see how to remove the old shock absorbers and replace them with better new ones? Thanks

[@a-ztube]

Yes please take a look at my older video s with my blue purple wltoys 😉👍

[@sonofigo78]

Hi, very interesting video, you skipped the second set of screws that makes the shock absorber support attach to the external case of the differential, When you turn the pins on the receiver you mount them in one order, but then afterwards they see them mounted the other way around, however the whole thing and understandable, The only thing you do not explain is where you have to insert the power plug of the fan Motor, could you tell me where it goes?

[@a-ztube]

Hey my Friend thank you very much ☺️ 🙏🏽 you're very welcome... I didn't showed because there are many options and it depends on wich plug you have. But this here has a servo plug means you plug in somewhere in your receiver. On other builds the plugs from my fans where jst and I putted a downconverter on it to power it directly from the balancer plug from my 3s lipos. So if possible with servo plug allways the best way hope that helps 😉👍🏽

[@sonofigo78]

@@a-ztube Hi Friend :) basically I bought a package similar to yours, in your video you put a fan on top of the transmitter, while mine is already integrated and the power plug fits on the transmitter and there is only 1 socket, so I don't understand because I was sold a set of that type, when then always in the set there is the fan to be applied on the motor, which has the plug exactly like yours in the video, and I do not know where it can be applied, I state that being an amateur at I'm in trouble in this field, I wanted to ask you what DOWNCONVERTER was, because I really don't know what it is, or if you could make a video so that I can understand what it is and how it applies, thanks.

[@a-ztube]

Hey my Friend please check my instagram or Facebook Profil it's also in all my video Descriptions then I can help you out 😉🙌🏽

[@ahmadazhar6085]

how fast can it go??? do you have any video speed test??

[@a-ztube]

Assalamu aleikum akhi, No because I only use it as an drifcar but by time I can / will make a Speed test 😉👍🏽 Think it's about real 45kmh maybe more Nice regards

[@POLITICALYCORRECTify]

With these complete upgrades you might as well just buy the upgrade kit and a body and not the oringial car lol I just brought that combo for mine does it fit int the stock plastic chassis? Looks likt you now have way more room for battery the stock only has about 60ml length for battery

[@a-ztube]

Hey my Friend, Yes,but at this time when I did the whole build there wasn't any kit available and I also build the car from scratch so I didn't bought a car 😉😁 Wich combo do you mean? The Brushless one? Yes should work,but not 100% sure because of the motor mount 🤔... And yes for the battery your space is definitely better 😉💪🏾

[@hammerT2997]

Hey brother. What did you do for your a-arm screws?? . They seem to lock up when tight enough to not fall out. Sweet build, I've got the grey chassis

[@a-ztube]

Hey Bro THX....😉👍🏽 Well to be Honest the best is LOCTITE everywhere 😁 Nice regards ✌️🏽

[@hammerT2997]

@@a-ztube true. I just don't see why they didn't go with a bushing right there. That c-hub doesn't like to move inside a-arm when tightened up properly. I've got two set of c-hubs, I was thinking about trying to put one in there after drilling out

[@a-ztube]

Yeah bro you're right don't know what's the problem on all parts that the fit and work good I think that should be no problem ✌️🏽

[@hammerT2997]

@@a-ztube hell yeah, awesome. Thanks for response brother

[@a-ztube]

You're welcome bro any time ✌️🏽

[@ngaichimto3107]

Can i use the jx pdi 1181mg servo instead of the emax you use, pls answer me :)))😊😊😊👍👍👍

[@a-ztube]

Hey my Friend sorry can't really tell You but if it's the nearly the same size for sure 😉 👍🏽

[@ngaichimto3107]

@@a-ztube oki thank you:)))

[@a-ztube]

Your very welcome any time my Friend 😊 🙌🏽

[@increadiboy]

How does it runs with all the upgrades, can you make the video of it

[@a-ztube]

Hey my Friend, A new video is coming up in the future. Well I decided to make it to an Drift car because it's so nice didn't want to drive it on the road anymore 😁. Well it handles well but you have a bit of work for sure if you want only a fast car take a B Model 😉👍🏽. Nice regards

[@increadiboy]

If i live in USA i would like you build the same one for my son. But since im in Indonesia there will be time delayed for delivery and taxes. He’s birthday its at the end of this month and i am looking to buy the factory spec

[@a-ztube]

Wow Indonesia very nice 😍👍🏽 but I am located in Germany my Friend 😉 Yes take the stock one and get the parts step by step so that's an nice father and son hobby / DIY thing 👍🏽 Nice regards

[@NordicRC]

Good job, bro. Doing an upgrade series as well now. So, did you have any trouble with the metal drive train?

[@a-ztube]

Thanks bro you're welcome 😊 👍🏽 Do you mean the drive shaft? Well the shaft and diff house had to be grind down to fit the rest will come by time driving. Iam not happy 100% about the hole build but I like it very much.if you you want a nice and fast car go and get a B model with some metal parts that would be the best solution. Nice regards

[@NordicRC]

A - Z tube No, I meant the whole drive train (gears, diffs, shaft). Just did a complete metal upgrade of the drive train (on a standard A959) and it seems to bind but when I open it up, shaft, diffs everything is spinning good.

[@a-ztube]

Do you have the adjustable rods also?

[@NordicRC]

A - Z tube No, everything is standard except for the metal drive train.

[@a-ztube]

Ok Hmmm I don't know the behaviour but normally it should work good if you have the new batch of gears and diffs.... With the metal bottom plate you have to grind down the drive shaft it's too long but everything from the metal parts don't fit 100% all ways adjustment and that stuff my DIFFHOUSEs are not closed 100% for good working. So I made the car to a drifter that's the best way for my build didn't want to drive it like that on the road. Nice regards

[@fabiomachado3865]

Hello. What type of battery are you using on 979b? Thanks.

[@a-ztube]

Hey my friend , 3s Lipo 1000mah 😉👍

[@MA-bq8yg]

Hello, thanks for the wonderful video & ideas. My son has a T2M pirate tracker and I want to upgrade the motor. Can you please help to find all the necessary parts to upgrade it? Thanks in advanced

[@nelsonromeltamayo9543]

Hi there I have a question. Is that the A979 or A979-B? Bcoz I am a bit confused by the way WToys puts their description on their online shop page?

[@a-ztube]

Hey my Friend, That's the wltoys a979.not the B version at this time there wasn't the B version on the market hope that helps 😉 👍🏽 Nice regards ✌️🏽 😎 🏄🏽

[@POLITICALYCORRECTify]

No way you didnt run it? I wanna see it go. Is it quicker now?

[@a-ztube]

Yes for sure its much Quicker ;)

[@ΒαγγέληςΣυνοδινός]

Is it waterproof

[@a-ztube]

No my Friend 😊 👍🏽 Nice regards

[@dawson_c1952]

Do know if that motor will fit in the hbx rampage

[@a-ztube]

Dawson Calhoun Hey my Friend no sorry I don't know. Is it an copy from the wltoys? Stay safe nice regards

[@maisonfamiliale9196]

yes

[@violater7026]

So if i go brushless with my car with a 60Amp esc i need to get a new remote with it all right ?

[@a-ztube]

Hey my Friend, Yes when you want to change you need a new motor and esc also transmitter ( remote) receiver and servo because everything stock is special and a mix of esc receiver combo 👎🏽

[@violater7026]

A - Z tube oh damn i just might not do that to the wltoys 144001 thanks my dude

[@a-ztube]

No problem you're welcome 😉👍🏽 But if you want to stay in this hobby and maybe getting more cars also if one thing is damaged it's wrong thinking over changing some parts a cheap flysky fsgt3 transmitter with receiver is very good receivers are very cheap and you can bind up to 10 cars and boats 😉 [45,92€ 27% OFF]FlySky GT3C 2,4 GHz 3CH AFHDS LCD Bildschirm PPM-Ausgang Sender mit FS-GR3E 3CH Empfänger für RC Boot Auto RC Teile from Spielzeug Hobbys und Roboter on banggood banggood.app.link/bkYCWeP6Q8?p=5Y130935228052016013 Stay safe ✌️🏽 😊

[@fran.6496]

Is it analog servo and is it 12x 30x32mm?

[@fran.6496]

Ok, i found in desc, is there any metal gear 5+kg servo for wltoys a959 brushless?

[@a-ztube]

Hey my Friend I don't know right now in the moment with some work a lot is possible 😉👍🏽

[@craigknight1886]

Hey so where did you find that pinion gear because I bought the same engine and the stock one did not fit? I would really appreciate it if you could tell me.

[@a-ztube]

Yes your right my Friend 🙈 I forgot to put the link in the description but now I made it take a look please. Nice regards ✌️🏽

[@craigknight1886]

Thank you man that’s awesome 👍

[@a-ztube]

Craig Knight no problem bro you're very welcome 😉🤙🏽

[@markdavid801]

Did it come with the pinion? Of not, which one did you buy?

[@a-ztube]

Hey my Friend no... Here's the link [5,44€]WLtoys A949 A959 A969 A969 RC Auto Ersatzteile Motor Getriebe rc teile from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/qlC2QtrEJ4?p=5Y130935228052016013 You also will find all the product links in my Video Description 😉👍🏽 Nice regards

[@mohawksniper79]

Looks nice I will probably do the same when I get my a969 but I will get my son to cut all the wires shorter and solder and heat shrink maybe even make a box down the length of the truck to run the wires through. Looks tight though brother keep up the vids.

[@a-ztube]

Thank you Brother appreciate that 😃👍🏽 Nice idea with the box 😉 A 969 is very nice think the best stock tyres from wltoys models. I will bro but because of the virus I have to work a lot ( Hospital) new videos coming up study tuned and stay safe. Nice regards

[@alcarriere1630]

Are you having any trouble with the steering rack?

[@a-ztube]

No my Friend everything like in the video but it's a lot of work trimming and LOCTITE 😉😁👍🏽 Nice regards

[@alcarriere1630]

I meant, did you have Loose Front Wheels? Like they were bone stock

[@a-ztube]

Al Carrière you need to use two hexnut if possible or as always LOCTITE 😉😁👍🏽

[@TonysRcTechboom]

Wow I have a A959 am thinking of Brushles , Looks Amazing, thanks for All the links, great build video my friend, thanks for sharing 👍😍👍

[@a-ztube]

Tonys Rc Tech thank you my friend you're welcome 😊 👍🏽

[@naveenjayathilake]

What the voltage this car lipo battery

[@a-ztube]

It's 3s lipo my Friend 😉👍🏽

[@beatriceventuroli4490]

Hi. How heavy ??

[@a-ztube]

Mauro Venturoli Hey my Friend... I can't tell you exactly but it's heavier for sure the only really heavy parts are the difhouse cases and the bottom plate. Nice regards

[@mysticknight85]

Is it faster now?

[@a-ztube]

chrisuriel85 hey my Friend yes it's faster now 😉 Nice regards

[@martin3288]

Hi, Could you link the motor mount for me? The links in the description do not work for me Thanks

[@a-ztube]

Hey mate please take a look I put the link on top in the description tell me if it works. Nice regards

[@martin3288]

Yes it works thanks 👍

[@a-ztube]

Martin Schaapherder you're welcome my Friend 😊 👍🏽

[@sandros1737]

Where to plug in the van for the heat sink??

[@a-ztube]

Hey mate, In the receiver if you have that plug or with a splitter to your lipo if it's between 1-2 s if you habe that plug there's a ton of ways how to 😉 Nice regards

[@RcOffroad9513]

This reminds me of the Creative Channel. Cool build! Cant wait to see the running video!🎄(edit) Finished watching now... Great looking 1/18 buggy!

[@a-ztube]

Hi my Friend Thank you very much you're welcome 😊👍🏽 Yes I love this tiny little car it's a lot of fun. Running video I think in the next week's the weather is to bad 😁. Nice regards

[@Amsterdam-n9i]

You can fit a 1500 mah battery

[@a-ztube]

Infinity Z I think so my Friend with some work you can also put bigger ones maybe, but especially on these small cars I like small battery's cause it fits good and you can give all the parts some rest / brake when changing the battery to a second one. I allways have 2 or 3 batterys for longer runs 😉👍🏽 Nice regards

[@Amsterdam-n9i]

Where do you get your battery’s

[@a-ztube]

Infinity Z banggood, Hobbyking, Amazon but Banggood has very good price and quality does banggood ship to you? [16,98€ 26% OFF]2Stk. ZOP Power 11,1 V 1500 mAh 40C 3S Lipo Batterie XT60-Stecker RC Teile from Spielzeug Hobbys und Roboter on banggood banggood.app.link/WevSqhh218?p=5Y130935228052016013 Perfect price for 2 lipos 👍🏽 This also 2 lipos in 1000mah perfect price [16,77€ 24% OFF]2Stk ZOP Power 11,1 V 1000 mAh 70C 3S Lipo Batterie XT30 Stecker RC Teile from Spielzeug Hobbys und Roboter on banggood banggood.app.link/52LD7Gt218?p=5Y130935228052016013 Nice regards stay safe ✌️🏽 😊

[@Amsterdam-n9i]

Thanks banggood does ship to me

[@a-ztube]

Perfect than take these you like very good price and C rate 😉👍🏽

[@dizzydrc]

Can you please tell me what the original car weighs and what the complete metal upgraded car weighs? Also want to build this one but than as a monster truck👍🏻💥

[@a-ztube]

Hey mate, I have no idea and chance to check this right now but I will give you an answer if know 😉 but the full metal is more than the stock I think twice the weight. Nice idea show it to us if you do it. Nice regards

[@Barbaric_Iron]

Beautiful design and upgrade!

[@a-ztube]

Home Dronen FPV Thank you very much my Friend 😊 👍🏽 you're welcome Nice regards

[@jailsonaraujo5766]

I really liked your video because it is very detailed to the assembly of each components there in your country is much more in account to buy a car more in account with more affordable values here in Brazil is very expensive.

[@a-ztube]

Oh wow thank you very much my Friend 😍👍🏽 That's always my wish to show the how in my videos because I often don't know how to do a thing you only see put it in or take it out but sometimes it's difficult to find out a part / thing of building something. Yes I think that's true but the best is if you life in Asian countries the hole stuff is imported from there 😁👍🏽. You're welcome my Friend anytime have a nice Day. Nice regards

[@DJayFreeDoo]

Hi! I'm thinking about building a car like this myself. What motor mount would i need to fit a Velineon 3500kv motor on this thing?

[@a-ztube]

Hey my friend You can compare the dimensions of this Motor and my Motor that I used but I think it will fit the motor mount I used in this build 👍🏽 Nice regards

[@elias7858]

Whered you get those tires?

[@a-ztube]

Sap Brahh hey my friend I put the link in the description 😉👍🏽 Nice regards

[@TonysRcTechboom]

Fantastic upgrades my friend, Love the Red, I've upgraded my A959 but blue,my isn't all metal because of the weight, I can get 47mph out of mine , want to try and hit the 50mph on 3s, I still have stock ESC and Servo, I've put a 550 brushed motor in mine, yours looks Amazing 👍 carnt wait to see it running 😁 Big thumbs up from me and a sub to go along with that well done my friend 👍😊👍

[@a-ztube]

Tonys Rc Tech Hey my Friend, Thank you very much 😃👍🏽 you're welcome..... Yes I think also it's much better to let some of the parts stock to get a very good running car, but I love the hole build to a test drive is coming but in the Future I will make a Drift car from the hole build it looks to nice for Dirt and Scratches 🙈😁.... Have a nice day and nice regards ✌️🏽

[@4204-w4v]

Vill you test it soon?

[@a-ztube]

Yes my Friend for sure but the problem is the weather now in my country rain snow no good conditions 👎🏽 Nice regards

[@4204-w4v]

@@a-ztubeoof okay

[@eramirez34er]

How much would you charge for this exact same build plus shipping? :-)

[@a-ztube]

MR. INCREDIBLE34 hey my friend for you mean if I can build it for you and send it to you? 😁👍🏽 Nice regards

[@eramirez34er]

Yes that is what I mean 😎🙂

[@a-ztube]

MR. INCREDIBLE34 ah okay 😁👍🏽 Where do you live?

[@eramirez34er]

I live in New York. I’d love a custom car. What color options do you have?

[@a-ztube]

Oh bro Very nice but Iam located in Germany 🙈 that doesn't make sense to expensive with shipping and fees / taxes you can buy an much much better and bigger car for that money 😁

[@suciooo5498]

Please for links to parts

[@a-ztube]

Hey my Friend all the links are in the description 😉👍🏽 Nice regards

[@suciooo5498]

Ok thanks

[@a-ztube]

Modele Rc i Żeglarstwo no problem you're welcome my Friend 😊 👍🏽 The first one is no link from Aliexpress you habe to tipe it in on aliexpress. Nice regards

[@suciooo5498]

How much this a979

[@a-ztube]

Modele Rc i Żeglarstwo it's hard to say with electric motor and transmitter about 150$-200$ for sure

[@davidebena384]

Ciao, volevo chiederti che T ha il servo e la sua squadretta??

[@a-ztube]

Davide Benatelli ciao amigo ✌️🏽😎 only English or German 😉 👍🏽 Nice regards

[@davidebena384]

ok, desculpe-me 😅 queria perguntar-lhe que T tem o criado e o suporte dele? "

[@a-ztube]

No problem please make it with Google translate than I can answer you 😉👍🏽

[@davidebena384]

in fact I am using google translator 😛 haha ​​anyway can you tell me which square mounts? how many teeth?

[@a-ztube]

Davide Benatelli ha ha 😂 👍🏽 funny man you thought Iam Italian? Do you mean how many teeth the motor gear has? Nice regards ✌️🏽

[@PORTEDAS]

Whats car speed

[@a-ztube]

I can't tell exactly think somewhere between 40-50kmh

[@nikatskhovrebadze5803]

How much does it cost??

[@a-ztube]

Well it's hard to say but everything with Motor and transmitter setup I think it's somewhere 150$ Nice regards

[@nikatskhovrebadze5803]

Thx

[@a-ztube]

😉👍🏽

[@torontorc4637]

Great work man!👍🏼

[@a-ztube]

THX bro you're welcome 😊 👍🏽 by the way also very nice stuff on your channel one more sub,keep it up.. nice regards ✌️🏽

[@mavic5149]

what type of battery u using ?

[@a-ztube]

Hey mate 3s lipo about 1000mah Nice regards

[@814apollo2]

Can u do a video just like this one BUT for the wltoys 144001 😁

[@a-ztube]

Hey Bro for sure why not I have now a new project coming up an crawler, but after that should be no problem 😁😉👍🏽 You habe the metal parts already? Stay safe ✌️🏽 😎

[@DresdenFPV]

so you didn't do an upgrade, but instead build a new one out of replacement parts?

[@a-ztube]

Hey mein bester, Genau alles aus einzelnen Teilen über 1-2 Jahren zusammen gestellt und komplett aufgebaut. Deswegen im ersten Video 100% Metall Upgrade da ja eigentlich alles aus Plastik ist und im zweiten Teil dann von dem normalerweise Brusehd Setup zum Brushless Setup. 👍🏽 LG

[@garyrobinson7128]

Yes good point wonder if I just buy the parts instead as I have a motor esc home.

[@a-ztube]

Gary Robinson if you have an Motor esc combo that will fit use it 😉👍🏽 There're many Motor options that work but I think the tiny Motor is still enough power for the car 😉 Nice regards

[@guido_3461]

i am your 1000 subsriber i just clicked

[@guido_3461]

concratulations

[@a-ztube]

Hey my Friend thank you so much for your support appreciate that so much thank you 1000 times 😍👍🏽 Nice regards

[@MrMagicman1990]

Can't wait to see that beast in action

[@a-ztube]

Calle Couchgarnitur Hey Bro... Yes next video is driving test and giving honest review of all parts dos and don'ts... C U ✌️🏽😉

[@bretcrunk311]

Calle Couchgarnitur ok

[@4204-w4v]

Do you have a link for the motor

[@a-ztube]

666 P90 666 Bomb yes for sure my friend I forgot it in the description 🙈 but now it's in take a look Thank you very much Nice regards

[@4204-w4v]

The servo ?

[@a-ztube]

666 P90 666 Bomb man I forgot all electrical parts 🙈. NOW everything in the Description also the Heatsink and fans 👍🏽 Nice regards

[@4204-w4v]

Thx dude

[@a-ztube]

666 P90 666 Bomb you're welcome

[@Bricks56]

Relaxing music

[@a-ztube]

BRICKS thank you mate 😉 Yes it is 👍🏽 Nice regards

[@nelsonromeltamayo9543]

woowwww that is so cool

[@a-ztube]

Thanks buddy glad you like it 😍🙏🏽 Have a nice week 😉 👍🏽

[@garyrobinson7128]

Great series of films thanks!

[@a-ztube]

Thank you my Friend you're Welcome 😊 👍🏽 Nice regards

[@kekelino8706]

Hi! why didn't you make a demonstrative video? :D

[@a-ztube]

kekelino is coming up my friend I have a lot new stuff for the wltoys a979 😉👍🏽

[@kekelino8706]

@@a-ztube it's very nice ahah, i have receved my new wltoys A979B for my birthday :D

[@a-ztube]

Very nice congratulations my Friend 😊 👍🏽

[@reginaldmcnab3265]

Nice video!

[@a-ztube]

Thank you very much my Friend 😊 🙌🏽 you're very welcome 😉 👍🏽

[@reginaldmcnab3265]

@@a-ztube I think I will buy the A959. Normally I fly RC helicopter but I like everything RC

[@a-ztube]

@@reginaldmcnab3265 good choice but maybe one bigger? Yes I love rc helicopter too Iam reviewing the next days the eachine E160 3D Flight Helicopter 💯😍💪🏾

[@reginaldmcnab3265]

@@a-ztube ok cool I will look see. I’ve been eyeing the Eaching E160 too, would love to see your review

[@a-ztube]

Today it arrived hopefully till end of this week it'll come my Friend 😊 👍🏽 Iam very excited 😁👍🏽 Have a nice day ✌️🏽 😊

[@blaineleon9342]

Road test???

[@a-ztube]

Taoman yes mate, Very nice and fast think like a B model much faster I don't know but I will make it for Drift car it's to nice for outside and I have some bigger and faster cars next video is coming with all stuff and a honest review from every part. Nice regards

[@seangaming5449]

Nice but wheels are too small

[@a-ztube]

Yes they're for touring cars but on some wheels you only have these little ones like drifting tyres 😉👍🏽

[@POLITICALYCORRECTify]

Cant believe how short that motor is you couldvewent much longer.

[@a-ztube]

Yes for sure you can,but you mustn't 😁

[@moneybanks82]

Would I have to waste my time buying the ready to run version or could I just buy all of the upgraded parts and build a car from scratch

[@a-ztube]

Hey mate however you like. But I think the most stock parts work very good I would buy the a979 B version Upgrade the necessary Metal parts like drive gear Motor gear Spur and Front / rear A-arms shock Tower for the optic and that's perfect 👍🏽 Nice regards

[@adreaszfs9979]

Nice project. Bought one and basically because of you I'm upgrading everything now. 😂 I should have built one myself from the start instead of buying one. A quick one. Where are you going to connect the 2 fans you're installing. Thanks

[@a-ztube]

Hey my Friend nice to hear that 😁👍🏽 No problem wich one did you bught a or b Model? The one fan on the motor runs from the receiver and the second one the same or you can take an balancer to jst plug wach my latest video " Xinlehong Q903 3s Upgrade" there you can see it 😉 Keep it up and if you have questions get back to me you're welcome ✌️🏽😊

[@Cakebattered]

I'm surprised I never see anyone use CPU thermal past between the motor and the heatsink

[@a-ztube]

I really didn't need all the time with all my cars

[@bassman6171]

Can I have it?

[@a-ztube]

Bass Man no 😁👍🏽

[@KermitTheFrogOG]

This remindes me of those bomb rc cars in Cod

[@a-ztube]

Really in wich Cod? 😁 Nice regards

[@KermitTheFrogOG]

A - Z tube prob bo2 m8! Greetings

[@GustavoLima-jw1vo]

Muito lindo, deve ter ficado prefeito

[@Ris-v4w]

7:21 that is NO WHERE NEAR 90-95% !! if you get a 20% efficiency from that cooling you're lucky

[@a-ztube]

What do you mean 90-95% ? and thats the best and only way to cool your motor what do you want to do else ?

[@miguelangelmxdz3861]

@@a-ztube he want you custom liquid the car too XDdd, im thinking in make all you make, building the full chasis from 0 and use a aliexpress 60A-45A 5200kv kit for 30$, can you guess the speed? I really dont know how much speed i can get. Do you recomend me do this or directly buy wltoys 144001? Or other one??

[@a-ztube]

Hey Bro you're very welcome 😉 👍🏽 what do you want to do? Drive everywhere and jumping? And a lot of potential stock with brushless system und so durable as it could be with these small cars? Then go and get an xinlehong q903 or q901 no doubt about it please look at my xinlehong q903 upgrade videos 😉👍🏽 If you definitely want a buggy go and get the wltoys 14001 or the XLF F16 I reviewed in my last video the XLF F16 has stock some nice metal parts the wltoys 14001 is upgrade possible with metal parts 😉👍🏽

[@a-ztube]

Heres a special 16$ off Coupon and if you look down below there's the upgraded one with brushless 16$ off Coupon Code for my Followers 🏎.......... BGF16RC 💯🦾😎 XLF F16 RTR 1/14 banggood.app.link/vwx9vzBvmbb?p=5Y130935228052016013 XLF F17 RTR 1/14 Brushless Upgraded banggood.app.link/9JydwNFvmbb?p=5Y130935228052016013

[@a-ztube]

Speed is allways hard to say but normally on 3s it should be around 60kmh more or less if you make a good gearing und high C lipo with the right weight you also can get 70-80kmh I guess

[@tahayt6142]

I got a good hpi type car and it goes 60+mph

[@a-ztube]

Taha YT614 nice bro 😉 👍🏽

[@maxrc8364]

Nice build, love that chassis!?

[@a-ztube]

THX mate 😉 👍🏽 Nice regards

[@hasserecht3678]

This is a nice build. But to be honest there is nothing left of the former model from wltoys. This is not an Upgrade.

[@a-ztube]

Well we can discuss about this my Friend 😁👍🏽 Thank you very much you're welcome 😊 Nice regards and stay safe ✌️🏽 😎

[@stevemdelacruz5602]

Awsome

[@a-ztube]

Thank you my Friend 😊 👍🏽 you're very welcome. Nice regards ✌️🏽

[@nikatskhovrebadze5803]

Nice vid bro +1sub😁

[@a-ztube]

Thank you so much your very welcome bro 😉👍🏽

[@Saud-mt4wi]

I think with this metal upgrade the car won't flip over at high speeds like it usually does... I can't even drive in a straight line 😂 it flips over and over and over then does wheelies, donuts 😂 cuz it's too light and small for its speed

[@a-ztube]

Yes my Friend that's true you're right 😁👍🏽 Hub extender to widen the Spur is also very good for that tiny fast cars. Have a nice day Nice regards

[@Saud-mt4wi]

@@a-ztube you too have a nice day 🌹

[@samfugitibotds7118]

El bentilador ba al bariador

[@a-ztube]

Sorry but only English or German 😉 👍🏽 Nice regards

[@samfugitibotds7118]

Te traductorrr Te bantilator wid a sped controll

[@a-ztube]

Samfugitibo TDS what? Don't understand you

[@samfugitibotds7118]

My inglesh is beri shet xd

[@a-ztube]

Try Google translator my friend 😁👍🏽

[@poppopscarvinshop]

Very Nice Vids! +1 Sub Thanks Much!

[@a-ztube]

Thank you very much my Friend you're Welcome 😊 👍🏽 Nice regards

[@atiqueanwer2370]

extrem bouring and useless

[@a-ztube]

You don't need to watch 😉

[@earlyculyer4103]

What battery did you use

[@a-ztube]

Hey my Friend iam using 3s lipo 1000mah everything is in the video Description down below 😉👍🏽