Wltoys A979 100% Metall Upgrade

[@oldmanover4043]

Danke für den Tip mit den A949-53 Pin 2*20,5mm Wltoys . Die sind nirgends dabei. jetzt darf ich wieder einen Monat warten bis die von Aliexpress kommen.

[@a-ztube]

Oldmanover40 gerne 😉👍🏽 Ja das ist das Problem wenn man wirklich keinen a979 oder dergleichen schon hat dann fehlen einem diese schrauben bezw. Stifte. Kenne das da ich ja exakt das gleiche Problem hatte sogar bei noch etwas und musste wieder 3-4 Wochen warten. Bei Bangood geht's viel schneller nur leider findest du nicht alles dort. LG ✌️🏽

[@jstagzsr]

what an insanely gorgeous and just all around awesome set this is.. I ordered all Blue black and plain aluminum upgrades but the red and black looks AMAZING!!!!!!! im jealous and i havent even got my orders yet!! lol. i already have to upgrade again!

[@a-ztube]

Ha ha that's it my Friend I have some other colour in my mind and make everything again 😁👍🏽 Keep on going nice regards

[@bangurhead4027]

How do the upgrade parts fit????? I'm dying to know. I bought just the steering upgrades and the axle wheel seats do not fit and all the screws were very loose!!

[@jstagzsr]

@@bangurhead4027 no idea why yours didnt work. mine all fit perfectly fine. the ONLY thing that i had to alter was the steering arm in the middle because two parts rubbed, and the second floor slab i had to dremmel out 2 holes because i used a bolt through way of mounting it. other than that its literally taking old parts off and putting new parts on with very little effort. this is the easiest upgrade ive done. the A9x9 series cars are very easy and cheap to upgrade.

[@bangurhead4027]

@@jstagzsr Hey bro, I think the a959 is a little different than the a959B. Those front "seats", hubs whatever they're called, I mean I JUST got 'em from Amazon the other day, put them on the buggy immediately. The listing specifically said "compatible with the a959 AND the a959B", BUT.....then in the actual write up for the damn hub kit it said, "steering hub" for a959 ONLY, NOT a959B. So maybe I just ordered the wrong one thinking what you said, THEY'RE ALL compatible. Like I said I had to use the plastic ones for now. The only saving Grace for me bud is my 144001 is arriving on Thursday, so if this damn a959B if mine isn't running well enough, THEN I'm gonna sell the frickin' thing, I've HAD it with the breakdowns. The 144001 is a better buggy, RIGHT??... Mr brushless swap.. !😂 ✨💯👍

[@bangurhead4027]

And you just lost a subscriber ✅well DONE.

[@jaysrcexpedition]

That's good news it's a nice chassis I should have watched the video with audio on again looks sweet .

[@a-ztube]

You're welcome my Friend 😊 👍🏽

[@MrMagicman1990]

What a beauty. Can't wait to see it in action

[@a-ztube]

Hey Brother, Thank you Yes 😍 👍🏽 it looks very wonderful and I think I will put on Drift Tyres and only use it indoors 🙈 See U

[@pescaepicard9925]

Boy a comprar un a959b para iniciar en el mundo de RC me parece un buen carro,y tiene todas las mejoras, eso es bueno suerte Amigo saludos desde República Dominicana 🇩🇴🇩🇴🇩🇴🇩🇴

[@tittentei7331]

I found a video from you where you upgrade the A979-B to brushless. So then i found new motor set 🙂👍

[@a-ztube]

Hey my Friend, Don't know why but all your comments are invisible for me 😳.... Yes put LOCTITE everywhere believe me it's better 😁👍🏽.. And yes if change the motor esc you have to take a new receiver/ transmitter combo because the stock one from wltoys a959 / a979..... Is an all in combo, but if you have more cars or boats like me it's really better to upgrade to one transmitter. I really recommend you the flysky fsgt3 it's in the description link 😉 Nice regards

[@tittentei7331]

@@a-ztube thank you very much for this info man 🙂 👍

[@a-ztube]

Titten Tei your very welcome bro 😉 👍🏽

[@tittentei7331]

@@a-ztube 😊👍

[@realcrazyrc9180]

Looks really nice in red dude

[@a-ztube]

THX mate 😉👍🏽 When I started to get all the parts there're only purple and blue colours to choose so it was a bit of waiting and searching for the parts but now it's super easy 👍🏽 Nice regards

[@mdwan7250]

Nice video but came to installing the shaft you skip? Why cos the top plate press against the spur gear? And the whole shaft diff couldnt turn at all.that area need to b grind off ?

[@a-ztube]

Hey buddy sorry was so long time ago need to watch the video again,but for sure at that time the shaft need to be grinded a little bit

[@TonysRcTechboom]

Fantastic build video and again you provided all the links, I really hope to see you run this Beauty 😊 great Job my friend 👍😁👊

[@a-ztube]

Tonys Rc Tech thank you very much my Friend 😊👍🏽 you're welcome. Yes it will run definitely stay tuned ✌️😃 Nice regards

[@Barbaric_Iron]

NICE upgrade....🏎️💨💨💨

[@a-ztube]

Home Dronen FPV Thank you very much my Friend 😊 👍🏽 You're welcome

[@jstagzsr]

and for anyone who didnt know, the A959, A959B, and A979 all have the same everything. as far as upgrade paths go. The difference is in the batteries and motors. same chassis, same everything besides battery and motor and motor bracket and paint jobs. everything else identical. so parts for one will work on all.

[@a-ztube]

Joshua Stagnitto that's true mate 😉👍🏽

[@dallasgibson7578]

All of the aluminum parts fit the hellion animus "16th" scale rc too, the wltoys is a copy of it, or vise versa

[@a-ztube]

Really? I will have a look. Nice regards

[@bangurhead4027]

WRONG!!! THE STEERING "SEAT" FOR THE FRONT DOES NOT FIT THE a959b!! It's awful, they are too wide!!! The plastic ones work, but, the metal upgrade ones DO NOT FIT. So NO, THEY'RE NOT IDENTICAL. I had to out the plastic ones back on, the 2 metal ones didn't fit, the other parts the screws were EXTREMELY LOOSE!!!!

[@jstagzsr]

@@bangurhead4027 lol. why bother commenting if youre clearly wrong? everyone knows theyre the identical exact same thing. the difference is in the tolerances of the metal parts you buy from a variety of manufacturers which sometimes have to be dremmeled or cut or smashed into place to work.. the STOCK parts all work 100% on every single model because they are the exact same car.. you should probably do more research before commenting next time because it makes you look foolish when everyone already knows this very old news and now here you come along saying the common knowledge and already proven correct knowledge is wrong.. maybe dont buy the cheapest crap aluminum upgrades for your cars and you wont have issues.

[@RichHair]

Wow das Video hat gut gepusht

[@a-ztube]

Auf jedenfall digga davon noch das anderer und die feilun ft011 videos 😁👍🏽

[@kennethjames3925]

Is this the same process for the 959. ? I have the entire set of upgrade parts and would like to use your video for a reference to build it

[@a-ztube]

Yes my Friend it's 99% the same only the parts that hold the canopy are different 😉👍🏽 Good luck and thanks for watching mate 🙏🏽

[@livefree1030]

Cant wait to do this to mine

[@a-ztube]

It's a lot of fun my friend 👍🏽 Nice regards

[@liamevans6659]

I loved your video, and am wanting to build it myself, I can't seem to find those washers at 15:43 and those 4 rods/pins at 15:48, I know that the rods/pins are called: Front & Rear Susp Arms Pins Swing Arm Pin 2*40.5mm for WLtoys. But I can't find those rods/pins or, those washers that go with them. Could you possibly give me the link to find them? if so it would be very helpful! ----Thanks ----Also at 15:55 what was the rating on those washers? Was it M1, M2, M3, or M4? And at 20:18 what is the link to those pack of bearings for the wheel hub? Also in the dscription, it says "You need this two tiny metal rods for the steering seat only to find on aliexpress......A949-53 Pin 2*20,5mm Wltoys " I never saw where those went, could you give me a video stamp of when you used them? I know I asked so many questions, but I really need some help, and would greatly appreciate it. Thank you so much!

[@a-ztube]

everything in the description my friend nice regards

[@doughoggatt1645]

Great job, only one question and that is how are the steering spacers and rods held to the bottom metal plate?

[@a-ztube]

Hey my Friend thank you very much ☺️ 🙏🏽 They're only in a little gap in the bottom plate and hold by the whole upper parts steering linkage all that stuff that is screwed together and on top the top brace hold everything together from front to rear 😁👍🏽 Hope that helps have a nice weekend

[@doughoggatt1645]

@@a-ztube Thank you Some of the metal parts r just not connecting and movement r just not like thje shoul be.

[@a-ztube]

Hmm that's not good to hear mate 😟

[@marcodegidio3951]

The steering arm does not fit under the crankshaft, what should I do?

[@a-ztube]

You need grind the steering arm a little bit like I did 😉

[@kojjohn]

Thank you,just started my upgrade. Great work !!! I’m a nubby wish me luck ha

[@a-ztube]

Thanks mate you're very welcome 😊🙌🏽 You're going to do this 😉👍🏽

[@nilswengerowski]

These Tiny rods that connect the Steeringlinkage. Do these come with the basic a959?

[@a-ztube]

If we both mean the same it should be yes 👍🏽

[@marcodegidio3951]

Hello, could you please send me a link to the two metal strips that go into the front and rear bumper? Unfortunately I haven't found anything online, I'm also not sure what they are called, I hope you can help me.

[@a-ztube]

Hey buddy, Did you took a look into time the video description? Sorry the video is old and the links are down from Banggood, but these pins I believe are from aliexpress if I remember correctly.... If I find something I will let you know 😉🤜🤛

[@POLITICALYCORRECTify]

I have to ask. DId you never show the 959 metal brushless upgrade in action? I have just ordered that brushless combo i want to see how it goes?

[@a-ztube]

I showed in drifting action my Friend 😊 🙌🏽 Look at my video list please you're very welcome 😉 👍🏽

[@earlyculyer4103]

What screwdriver tips are you using?

[@a-ztube]

Hey my Friend, These are included with the screw driver it's Phillips and allenkey Nice regards

[@bmx2026]

I bought a Jingxi Chassis and the Metal upper deck part along with the alloy servo arms but nothing came with the two pipes at 13:57l, the ones that go through the servo mounting block into the upper deck. What part is that if you know or have a link that would be awesome Id really like to finish this project.

[@a-ztube]

Hey my Friend that's the first part in the description from Aliexpress you need to type it in because I can't post the link 😉 Nice regards

[@adaanishhh]

What size of the plastics washer did you use?

[@a-ztube]

2 or 3 mm I think bro they're in the video Description in part 1 or 2 get both they're not expensive and allways good to have 😉🤜🏽🤛🏻

[@adaanishhh]

@@a-ztube thanks

[@a-ztube]

@@adaanishhh you're very welcome 😉 👍🏽

[@a-ztube]

You're very welcome bro 😉

[@lexsub1]

Im building the same right now,watching your video.At 13;50 i didn't get those rods.where can i get them and what are they called?thanks

[@earlyculyer4103]

Wow...! Im thinking of trying now that i habe some visual aid i ordered the 959 Model do they have clear bodies to show off all the metal? Also how do you know what screws go where and type etc. Is there a diagram?

[@a-ztube]

Thank you very much my Friend you're very welcome 😉 👍🏽 I didn't know before wich screw to put where that was some testing and work my Friend 👌🏽😁

[@matthewhart1464]

Is the Carrera RC profi compatible with the WL toys RC 1/18 scale

[@a-ztube]

Hey mate They look very similar

[@jamesfoster4809]

Nice video. Thanks for sharing. Will the stock motor esc and servo fit and work without problems.

[@a-ztube]

Hey my Friend you're very welcome and thank you very much ☺️ 👍🏽 Yes that should work without any problems .. Have a nice day ✌️🏽 😊

[@TruSwagTv2]

Incredible you did a amazing job thanks for making this video 🤜🏼🤛🏻💯🕶😎💪

[@a-ztube]

Thanks bro very happy to hear that you're welcome 😊 👍🏽. Nice regards

[@TruSwagTv2]

@@a-ztube your welcome brother much respect RcFam4Life TRUFAM4LIFE BROTHERS4LIFE 🤜🏼🤛🏻💯🤝😎💪 I will be tuned great videos

[@TruSwagTv2]

@@a-ztube I made a post on my community for people to see and SUBSCRIBE well deserved for sure 🤝💪💯

[@a-ztube]

That's true bro the best for life 😎🤙🏽👍🏽 Man you have such good content and cars awesome one sub more 😍👍🏽

[@a-ztube]

For real bro 😳😃 thank you sooooooo much I can't believe. 🤜🏼🤛🏽

[@sigurdberg-hansen7710]

What do you mean by saying “in my case I had some work to do to make it fit” and “I had to grind it down”

[@a-ztube]

That's at two points of the hole build at the DIFFHOUSE cases and at the drive shaft. Before they sold the hole new metal differential gears set you had the problem at them also they didn't fit together so you had to grind them down so maybe at the newer production of drive shafts and DIFFHOUSE cases there aren't these problems any more,because of this I said in my case. Nice regards

[@bangurhead4027]

Alot of the upgrade parts DO NOT FIT!! You have to machine them or have someone do it for you. For example I have horrible problems with the screws not fitting, being loose and then the SLOP is really awfully, the steering's a mess. He was talking about the ADJUSTABLE turnbuckles, be careful with adjusting those as well!! Your steering counts on it.👍

[@a-ztube]

That's true my friend but there're different qualitys out there and you have to put everything together with LOCTITE. Best and honest solution take an B Model and make some parts only in metal that's the best for driving, but decided to make mine into a Drift car so it only have to look good and not really that high speed 😉👍🏽 Nice regards

[@yhhh5908]

HOW HARD IS IT TO MAKE IT BTW IS IT WORTH DOING IT

[@a-ztube]

Hey my Friend no its not that hard 😉... Hmm it depends on what you want what do you like more look or you want a more faster car?

[@roybray8741]

@@a-ztube i want look a lil and faster car i have a wltoys a979b where can i get cheap red metal upgrade parts at and what do i have to upgrade for bigger battery is it esc transmitter or somethimg

[@a-ztube]

Hey my friend all the links are in my Video Description 😉 👍🏽 No for bigger battery you don't have to change anything 😉

[@fran.6496]

A - Z tube yes but it need to stay 2s, ESC can run 2s (7.4v)

[@a-ztube]

That's right my Friend 😊 👍🏽

[@sifatkhan6437]

brother i have aa problem to build this a979 all metall rc car, could you please help me ? when i spin and turn my a979 ( teel wheel axle) then this stuck with dogbone please tell me what the reason ???

[@a-ztube]

Hey Bro please check my instagram or Facebook you can send me a pic or small video I'll help you 😉🤜🏽🤛🏻

[@jokanthetrickster]

How long are the short steering pins? My upgrade package didn’t include them 😢

[@a-ztube]

Jordan Kane Hey my Friend no they're not included in any package you have to take them from your car. Or if you haven't any car before you have to type in what I posted in the video Description 😉 👍🏽 Stay safe ✌️🏽 😊

[@Ris-v4w]

in the case of crashes, does this metal bend? or does it crack? - it will do one of these for sure, but which one... maybe really good and big plastic/rubber front/back bumpers would save the whole metal structure? would you do this upgrade for bashers ?

[@a-ztube]

No my Friend I wouldn't do this if your really want to bash with this setup also to nice for it 😁 and to be honest real bashing with them allways one part is damaged xinlehong q903 is much much more Durable 😉👍🏽

[@barberuvdayear]

Where can get screwdrivers 🪛 like the one you’re using..?

[@a-ztube]

Hey my Friend all my parts in the video Description 😉 👍🏽

[@barberuvdayear]

@@a-ztube thanks family 💯

[@a-ztube]

Not for this You're welcome Bro Rcfam4life 💯 Stay safe ✌️🏽 😎

[@barberuvdayear]

@@a-ztube God bless you family 💯

[@a-ztube]

And you too bro 🙏🏽 have a nice weekend 😊 👍🏽

[@MUSTANGMAN-ck1gh]

Can you do a video on how fast the A 979 B will go if you put a 9000kv brushless motor in this car?

[@a-ztube]

Hey my Friend to much power for that tiny car and to fragile. No problem with the wltoys 124019 much bigger longer wheelbase and weight should be go over 100mph for sure

[@jacksrcat]

What is the name of the alloy part which comes with the rods which are different for the steering ? (Old ones are drilled nut and bolt) mine didn’t come with them and like you say it’s impossible without

[@a-ztube]

Hey mate.... Sorry I don't know wich part exactly do you mean? Nice regards

[@jacksrcat]

Doesn’t matter now mate I’ve sorted it and got some ordered (the 20mm metal rods which hold the steering components in which replace the nut and bolt from before)

[@a-ztube]

Happy to hear that...Ah okay now I know what you mean yes you habe to order them separately they're not included in the steering alloy part Nice regards

[@mtctookie25]

Pretty sweet looking build, how much for all the upgrades?

[@a-ztube]

Hey my friend thank you It's hard to say but I think with transmitter / receiver and the hole Brushless combo somewhere between 100-200$... Nice regards 😊👍🏽

[@mtctookie25]

@@a-ztube Was thinking about building the same car without motor & esc & radio...I already have those parts. Only interested in the chasis & parts.

[@a-ztube]

Ok my friend I think all this parts will be about 100-150$. Nice regards

[@mtctookie25]

@@a-ztube Where did you get parts from?

[@a-ztube]

Hey my friend all the parts are in my description 97% is from banggood and 1-3 parts from eBay and aliexpress. Nice regards

[@Codybear09]

Love the video Whats the total price to build this from step 1 In ur links it that all to build the rolling chassis Thanks

[@a-ztube]

Hey my Friend thank you very much ☺️ 👍🏽 You're welcome. It's hard to say now you can buy in some colors some kits that include many parts but you need all the parts in my description to build this Roller right. I think it's about 120-150$. Tell me if you have any questions 😉 Nice regards

[@Codybear09]

@@a-ztube I think i would.like to.build one for my son So if i add one off everythink from.ur links will i I just need to purchase the electrics Or is there more than one to order

[@a-ztube]

Yes my Friend and in my other video you find the brushless setup ( Motor, esc, servo and if you haven't a receiver / transmitter) 😉👍🏽

[@TheK20eg]

Would the Metal Front & Rear Gearbox u installed fit the a979b?

[@a-ztube]

I am not 100% sure my Friend, but I think yes it should fit 😉 Nice regards

[@earlyculyer4103]

What screws and parts do you use the Loctite?

[@a-ztube]

Put it everywhere is the best cause it's not the hardest you can open the screws if you need again the best also put it on the rods / linkages also screw them out before they fall out and after putting the LOCTITE screw them together the length you need 👍🏽

[@blaineleon9342]

Finish truck with motor & road test?

[@a-ztube]

Hey my friend, No but I hope in the next days stay tuned video is coming. Nice regards

[@francescopetrelli7783]

Thank you so much for this! what kind of screwdriver do you use? do i find it on the internet? Bye

[@a-ztube]

You're welcome my friend thank you 😊👍🏽 It's a screwdriver with small bits you can find them nearly everywhere. I will search one and give you response and post it here. Nice regards

[@dantelambo2290]

I have an A979b is this the full metal list for it ?

[@a-ztube]

Hey my Friend should be everything the same except the gears and stuff like that because the B Model have different Motor and gearing, but if you check the links you can read their product information. Nice regards ✌️🏽

[@bmx2026]

The two metal rods you show at 13:50. Where do I get them? Which part do they come with?

[@a-ztube]

bmx2026 hey my Friend everything is in the description. That's the first post from Aliexpress I couldn't put in the link don't know why you have to tipe it in 😉👍🏽 When you have a stock car you can take them from your car it's from the steering if not you have to order them. Nice regards 🤙🏽

[@roybray8741]

I want to upgrade mine but not bottom plate is it hard to do so I'm doing the front steering soon the rods then the cup can i use the bearings from factory on new upgrade

[@a-ztube]

Yes my Friend should be everything possible 😉👍🏽

[@TheBluntmanblue]

Do you know why my drive shaft is about 5-6mm to short?

[@a-ztube]

Hey bro to short 😳 that's the first time I hear that normally it's to long so you have to grind it down 🤔 I think that's an fault by the manufacturer. Do you use an A or B Model? Nice regards

[@TheBluntmanblue]

Got the same chassis skid plate and the kit with most parts just in grey. drive shaft came with it. Did notice spur gear is 38tooth so it's not b but it should of fit.

[@a-ztube]

Very strange can you measure how long your drive shaft is exactly?

[@tonil6604]

Nice build but, I would recommend even loctite for the bottomplate screws! Without they easily come off!!!

[@a-ztube]

Thanks mate, Yes you're right 100% but I did and told in my video and description I think also but because I made the video and didn't know in the beginning if everything was right I made it after also with the adjustable steering rods without its horrible. Nice regards

[@_owenmc]

i’ve never gotten into rc cars so if i got this car which upgrades should i get first?

[@a-ztube]

Hey my Friend, It depends on what you want to do with the car. If you want to convert it like me into an Drift Car or show car than you can do all the metal mods. If you really want an cheap and nice looking car I would go for the wltoys a979 B Modell it's fast out of the box and you can upgrade some of the metal parts for a nice look [78,92€ 21% OFF]WLtoys A979B 4WD 1/18 Monster Truck RC Auto 70km / h rc fahrzeuge from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/cBz2gLTJM7?p=5Y130935228052016013 Tell me what exactly you want from your rc car and I can help you out if you want. Nice regards and stay safe ✌️🏽 😊

[@_owenmc]

A - Z tube thanks for your response! I was looking for a budget car under $150usd. I would like it to be durable and fast. I don’t really know what i’m looking for at the moment but i do like that car you have considering it’s relatively cheap.

[@a-ztube]

Little500 no problem you're very welcome 😉 👍🏽 Ok than I would better and highly recommend you the Xinlehong Q903 you can look in my latest videos it's cheap and fast easy to go to 3s lipo and it's very very durable Coupon Code for xinlehong car BG14532XL RC Car Xinlehong Q903 1/16 2.4G 4WD banggood.app.link/3QRlzAfN24?p=5Y130935228052016013 You can try the coupon code maybe it works but I don't think so 😁🙈. If you look in my other videos from the Xinlehong Q903 you can find upgrade shocks get them for sure much better handling and jumping and if you want to go to 3s lipo you can get the other parts but you only really need the lipo battery if your hometown isn't that much heat in the summer. If you're getting the car with only upgrade shocks you should be around 90-100$ not more 😉👍🏽

[@_owenmc]

A - Z tube Thank you so much!

[@a-ztube]

You're Welcome any time 😉👍🏽

[@jailsonaraujo5766]

Gostei muito apreendi muito na montagem deste automodelo. Obrigada pelo conhecimento

[@a-ztube]

Sorry my friend only English and German. Nice regards

[@Jewaitetzelfwel]

I want to upgrade mine also.. But i cant do it by myself. Do you know if its possible to buy a upgraded one? And how much is the weight after all metal parts?

[@a-ztube]

Yes there's a complete upgraded car with metal and carbon fibre bottom build together version my Friend [174,28€ 33% OFF]Wltoys 1/18 4WD A959 A969 A979 Alle Metall RC-Car-Chassis RC Fahrzeugmodelle Teile Rot / Gold / Titan rc teile from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/rwGC5xyK56?p=5Y130935228052016013 Of course you need then Motor esc servo and transmitter Nice regards

[@cahcivil660]

Nice video

[@a-ztube]

Hey mate, Thank you very much 👍🏽 You're welcome. Nice regards

[@ellsusiwkssd]

hi mate im literally copying your tutorial as we speak great work:) just a question if i was to put an 80c 5000mah battery would by esc break by any chance?

[@a-ztube]

Thank you so much my Friend you're very welcome 😉 👍🏽 How many s? 3s lipo? Because of the mah and c rate their will be no problem 😉 but 5000mah is huge and heavy and also its better that you gave the car and the parts a rest some break that's how I drive all my Rc cars boats whatever 1-2 or 3 small lipos with some break in between and I had never all the years any broken Motor esc or whatever 🦾😁. Stay safe mate ✌️🏽😊

[@Ris-v4w]

really curious, does a complete metal upgrade increase the rolling noise of the car?

[@a-ztube]

No I think with metal it's louder but more Durable for sure 😉👍🏽

[@Ris-v4w]

@@a-ztube even if it's noisier, it's a "good noise", i get it :D

[@a-ztube]

@@Ris-v4w for sure bro 😍 😁👍🏽

[@johncgibson4720]

I ordered the Justierbarer Stangen to replace my 230 sized helicopter's swashplate linkage last night. I replaced a few of my helicopter parts with WLToys car parts because the after market WLToys parts are 100 times stronger than stock helicopter parts. But, the linkage ball size are never disclosed by the 3rd party suppliers, and I don't know if they fit with my heli. I will subscribe to your channel if the ball size fits my heli. Thumbs up.

[@a-ztube]

Wow that's cool mate 😍 👍🏽 wich Heli?

[@MichelleNolan1103]

What motor system did u put in this?

[@a-ztube]

Hey mate look my second video there you can see it 😉👍🏽 It's 3s system Nice regards

[@bookstore-n6x]

where did you buy metal parts?

[@a-ztube]

최원우 Hey my Friend 😊 All the parts are in the Description from my video. Let me know if I can help you Nice regards

[@bookstore-n6x]

@@a-ztube Thank you.

[@a-ztube]

You're very welcome my Friend 😊 👍🏽

[@bookstore-n6x]

@@a-ztube 👍😘

[@liamevans6659]

Hello, I asked a lot of questions a couple of days ago, and you told me that you were unable to reply, so I'm writing this so you can hopefully respond to them. Thank you so much!

[@a-ztube]

Hey my friend sorry wich parts do you wanted to know? Nice regards

[@liamevans6659]

@@a-ztube hey thanks so much I am looking for the washers at 15:43 and.the 4 rods/pins at 15:48 and what was the rating of those washers at 15:55 was it m1 m2 or m3? And at 20:18 what was the link to the bearings for the wheel hubs. Also what was the purpose of those 2*20,5 mm pin for the steering seat. What's the purpose of those? Thanks so much!

[@a-ztube]

Liam Evans ok my friend the original wltoys metal washer are hard to find I can't get them anymore but you can also take the black plastic ones from the video they're 1mm. The link for the rods is now in the video description you need to buy two packages to have 4 😉 If you don't own a car you need the two steering seat pins also cause otherwise they miss. You can see all the links in this and my other videos there're smaller bearings for the outside and bigger for the inside of the wheel hub. And you also need bearings for the main driveshaft. Nice regards

[@liamevans6659]

@@a-ztube thank you so much

[@a-ztube]

Liam Evans you're welcome my Friend 😊 👍🏽

[@sonofigo78]

Hi, yours is a very interesting video but you should make a special one on 2 points appeared in overpressure, 1 point -n somes cases it's better or necessary to grind the differential house, 2 point - and in some cases also to cut down the spur gear a little bit I would like to see where these interventions are carried out and on which side of the spur gear, there is a single fact that does not come back to me in this video, the cylindrical box that contains the 4 small gears of the differential and in plastic not in metal = nothing 100% 100 metal.

[@a-ztube]

Hey mate thank you very much ☺️ 🙏🏽 Yes I can try or give you help if needed Mmm I don't have the videos in my mind,but I think the 4 gears in the diffs are also metal 🤔😁anyway also rims and servo horn are plastic if so it's 97% metal 👌🏽😂 but no problem to switch all these to metal. Have a nice week ahead and stay safe ✌️🏽 😊

[@sonofigo78]

@@a-ztube Hello, I am referring to the cylindrical-shaped differential box where the 4 metal gears of the differential are placed, the box that contains them is made of plastic

[@3dgraphicworkz463]

Are those 1/10 scale touring car hex and wheels? They fit?

[@a-ztube]

Hey my friend you need an hex adapter for the wltoys think it's 12mm the link is in my Description. Nice regards

[@rcmedia9516]

I do not like this kit for the 959b. Nothing fits correctly. The middle bar is not drilled for steering. Wanted to like it. Sad. Awesome video though.

[@a-ztube]

Hobby Media Hey my Friend thank you very much ☺️ 👍🏽 Sad to hear that there should be some work at the steering linkage at the drive shaft and at the diffcase houses but only some down grinding.,but missing holes is very bad 👎🏽 did you bought the complete kit? Where did you bought it? Nice regards ✌️🏽

[@rcmedia9516]

@@a-ztube I buy on banggood. Alot of Dremel to fit things on 959b, I buy just for a arm. C cup. I think I may keep rest of car plastic.

[@a-ztube]

That's true my Friend....for normal or high-speed ride it's definitely the best option gears and arms in metal maybe shock tower and the rest in plastic 😉

[@jessyx3671]

Hey u said these 2 rods for the steering are important .. Where are they include or ?

[@a-ztube]

Hey my Friend.... I don't know wich you mean exactly? But if you mean these two small tiny silver poles / pins they're nowhere included you have to buy them yourself the link should be in the description. But if you have an wltoys a979 a959 what ever you can take these two. Nice regards

[@jessyx3671]

@@a-ztube thanks !! Yeah i mean These 2 :D I saw it 20 sec's later in the descroption :D Thanks and greetings from GERMANY !! I wanna build one too with full metal. How good is the upgrade ? Do parts break away ? ^^

[@a-ztube]

Hi Mensch dann können wir ja auch auf Deutsch schreiben 😁👍🏽 Also ich bringe noch ein finales Video raus, aber anschließend kann ich dir Schonmal sagen das alles aus Metall mit viel LOCTITE schon geht aber selbst die 1:10 Ersatz Räder alles nicht 100% rund ist also für ein high-speed wltoys a979 würde anders vorgehen und ich finde ihn mittlerweile viel zu schön. Ich werde / habe ihn zum drifter umgebaut ( nur andere Räder) was ich denke für das ganze einfach perfekt ist. Wenn du, aber optisch und gute Performance bei günstigsten Preis haben möchtest nimm einen wltoys a979b Modell einige Metall Teile dann hast du ein schönes und gut funktionierendes Auto. LG 👋🏽😊

[@jessyx3671]

@@a-ztube nice so kann man das Schon mal gut einschätzen. Ja ich habe mir als erstes die größeren Arbeitnehmer gekauft für die 1:10 Räder wie ich finde sind die onroad reifen perfekte Kombi mit dem Auto. Ja ich möchte ganz gerne ein ganzes Projekt draus machen was am Ende Full Alu ist mit ner brushless Combo. Mir geht es darum ob das alles stabil ist und auch ein bisschen haltbar. Natürlich ist da Spiel vorhanden das ist aber im Rahmen.

[@a-ztube]

Ja genau also wenn du bock hast zu basteln und nicht auf absolut Highend gehen willst damit und gut LOCTITE verwendest geht das 👍🏽 LG

[@nishblaze]

i have the a959 b and would like a longer lasting battery with the same amount of voltage. will the higher mAh give it more power or just last longer? any recommendations?

[@a-ztube]

Hey mate the higher the mah the longer it will last. As example the stock 3s lipo is 1200mah or 1400mah you should get a 1800mah or 2200 mah lipo but it's bigger so you have to look how to get it tight inside the car. Nice regards

[@nishblaze]

@@a-ztube thanks! i'll make it fit somehow haha

[@a-ztube]

nishblaze that sounds good mate 😁👍🏽 But please search for 2s lipo your stock one is 2s not 3s like I told before and look for high C rate something about 40c or higher is always better but makes the lipo a little bit more thicker. Nice regards

[@muhammadfirdaus6733]

Where u buy the spare part bro? Shopee?

[@a-ztube]

Hey Bro,everything from banggood all the parts also in the video Description 😉 👍🏽 Stay safe ✌️🏽 😎 and salam

[@cincyjro1]

Where did you find the metal dowels for the steering linkage? I ordered a full conversion package and I didn't get them.

[@cincyjro1]

nevermind... Now i see it above

[@a-ztube]

Ok my Friend 😊 👍🏽 you're welcome

[@deovratsharma9190]

At 19:03-19:08 the metal ring that u put on the swing arm pin..where can i find that?

[@a-ztube]

Hey my Friend everything in the description 😉👍🏽 Don't remember 💯% it should be in the package with the pins or with these blue plates that came in front of them but one of these packages for sure 😉

[@a-ztube]

I forget you can also take normal washers no problem 😉

[@a-ztube]

Hey my Friend you can check the Description there's a list of all the parts I use 😉👍🏽 Nice regards ✌️🏽

[@jaysrcexpedition]

Loctite is a must you put the thing together without loctite it's a good thing the parts are red so you can find them

[@a-ztube]

Hey mate yes that's true 😁 no I didn't showed every part and after making the vid I put on everywhere LOCTITE I told it in the video you can see 😉👍🏽 Nice regards

[@a-ztube]

That's true 👍🏽

[@renadtalal]

ok if i want full ready to install my motor and esc and servo

[@a-ztube]

Salam akhi what's your question exactly?

[@ivano6334]

Hi mai I know where you buy the servo mounting bracket

[@a-ztube]

Hey my friend take a look in the description it's from banggood 😉👍🏽 Nice regards

[@ivano6334]

Thanks man..i'm doing the same job but in gold color. Thanks also for your tutorial, its very useful and very well done. Regards

[@a-ztube]

You're welcome my Friend 😊 👍🏽 Wow that would be nice too let us know if you're finished. Nice regards

[@ivano6334]

Unfortunatly i realize that some parts were not sent so i need to wait for delivery, once i complete i will post a video

[@a-ztube]

Iam looking forward to it my friend. Nice regards

[@kalpanahurpude705]

how i purchase thr all parts please give purchase links

[@a-ztube]

Hey my Friend all the parts you need are in the video Description 😉👍🏽 Nice regards ✌️🏽

[@kalpanahurpude705]

ok Thanks

[@a-ztube]

You're very welcome my Friend 😊 👍🏽

[@edmuncherstylus2963]

How much did the entire upgrade cost?

[@a-ztube]

Hey my Friend, Well it's hard to say I searched the last year's every single part at this time aren't any kits so I think it's about 150$ the hole Metal build and about 30$ for the brushless servo combo. Nice regards

[@a-ztube]

Yes 😄

[@ckr4x4]

beautiful...!!!!

[@a-ztube]

THX brother much appreciated 😍 🙌🏽

[@PORTEDAS]

Very nice

[@a-ztube]

Thank you my Friend 😊 👍🏽

[@jerichomanansala935]

Where did you get the rods for the steering wheel?

[@a-ztube]

Jericho Manansala hey mate, From banggood the link is in my description. Nice regards

[@jerichomanansala935]

@@a-ztube thankyouuu

[@a-ztube]

Jericho Manansala you're welcome my Friend Nice regards

[@tomaspalacios2826]

Where did you get them wheels ❓

[@a-ztube]

Hey my Friend All the links to the products are in the video Description 😉 👍🏽 Nice regards

[@speedslidesandspeedrides1728]

Metal can bend but it looks better

[@a-ztube]

That's true man 😉🤜🏽🤛🏻

[@KddVrgO]

Where did you buy those both washers from?

[@a-ztube]

Hey Bro, Thought they're in the description but there's no space for everything that's the link banggood.app.link/jcB3zbBHQ6?p=5Y130935228052016013 Stay safe ✌️🏽

[@lexsub1]

I've looked for the part on banged,but i can't find them,do you have a link?thanks

[@a-ztube]

Hey mate, I think it's something of the link I wanted to poste it's from aliexpress.give me some time Iam in the hurry but I will send you the link from banggood. By the way didn't you find the link in my video description? Nice regards

[@a-ztube]

lexsub1 no bro you really only find it on aliexpress or somewhere else not on banggood. So please search for....... A949-53 Pin 2*20,5mm Wltoys Please tell us if you will find them Nice regards

[@lexsub1]

@@a-ztube hey,thank you so much,I've ordered them.hopefully it won't take too long to arrive.its already been six weeks waiting for everything.thankyou for taking your time to help out.

[@a-ztube]

lexsub1 you're welcome my Friend glad to help you. Yeah that's the case everything needs a little bit to arrive btw. I ordered all the parts over 1-2 Years ago and only had to wait like you because of this and the rods front and back for the arms 🙈😁. Contact me and tell us if everything works well, but it's a bit of work. Finished the brushless Set up but have to upload the video., I decided now to make it an drifter indoors because of that parts and the beauty of that thing for high speed racing and outdoor Bashing it's not the right car. Nice regards

[@lexsub1]

@@a-ztube Hey thanks again,ill let you know when its done,i may make two.and the same,inside only,too nice for outside.ive got a A959b and a979b for outside for me and my son.eve upgraged a few parts on his 959,he's only 4 and drives it like a boss.the one I'm making is too put on his shelf,in his bedroom.what brushless motor would you recommend?

[@naveDrahcir]

Does this fix the play in the steering? Stock has a lot of wiggle.

[@a-ztube]

Hey my Friend, Not really with all the metal parts you a lot of play or better you have to use LOCTITE everywhere 😁😉👍🏽

[@TheK20eg]

Not sure even worth doing I did everything metal and the truck is slower and it’s heavier regret changing everything now i have to put everything back to stock -_- garbage the steering is the same aswell i have the a979b

[@a-ztube]

Hey mate for sure, metal is heavier 😉 Do you use stock Motor or brushless? Nice regards

[@TheK20eg]

A - Z tube im running stock and it was way faster then adding the metal too heavy

[@a-ztube]

TheK20eg yes for sure the metal is heavier 😉 and with stock Motor it's underpowered. Anyway if you want a cheap and fast car get the B Model and only a few metal upgrades or make an brushless combo that's the best way so my car shouldn't be really fast it's more an show car nice things coming up this year and also it's not an basher with this metal parts 👍🏽 Wich model do you have A or B?

[@jamaalsmith7299]

My 959b the steering arm pins where do you get them?

[@a-ztube]

jamaal smith hey mate everything in the Description please search for....... A949-53 Pin 2*20,5mm Wltoys Nice regards

[@camperjobs9879]

I love this car low cost and very good quality now for other Factory rc the season is very black.

[@a-ztube]

It's a very nice car really with a lots of options 😉👍🏽 Nice regards

[@lexsub1]

Hi,can you help me with finding the rods at 13:50,please

[@a-ztube]

lexsub1 hey mate I postet an answer 3 times don't know why something don't work

[@skkracing9994]

Test drive Video?

[@a-ztube]

Hopefully in the next week's if the weather is better. Nice regards

[@randomrc4198]

What size allen key was it for the diff case screws

[@a-ztube]

Random Rc hey my Friend I can't tell you right now but it's very tiny if you get one of the sets I use or the xiaomi wowstick you'll have the right one in it. Nice regards ✌️🏽

[@randomrc4198]

@@a-ztube Thankyou

[@a-ztube]

No problem my Friend you're very welcome 😉 👍🏽

[@randomrc4198]

@@a-ztube I'm planning on building one with a 1/10 brushless motor so it will be insanely fast and take it to the skate park

[@a-ztube]

Very nice idea my Friend 😍👍🏽 But to be honest for big jumps and stuff like that the wltoys aren't that durable 🙈 Did you see my Xinlehong Q903 videos? Nice regards

[@edwardbond8775]

I’m trying to go through the parts links you have but your links are terrible and it puts me to 4 extra steps to open the Banggood app for no reason. Constantly pushing me to the App Store to open it rather then just opening banggood. TERRIBLE. All I want is the link to the pins for the steering cause I haven’t been able to find them

[@a-ztube]

Hey my Friend you're Welcome....your the first one telling habe such problems Iam also an ios user and if I get on the link I can choose if I want to open it with Google or safari and it ALLWAYS brings me to the banggood app no problem. You don't have the banggood app? Cause the links are from the Bangood app and it should work also with an computer. Nice regards ✌️🏽😊

[@a-ztube]

By the way the pins for the steering are only to find on aliexpress like at the first step in the video Description 😉 👍🏽

[@edwardbond8775]

Yea I have the banggood app and am on an iPhone 11 and this is the first time I have ever had any like force the App Store to open banggood app. And I link to it a lot cause I watch and use Kevin Talbots videos for reference and he only uses banggood. Again his links always open the app but your links take me to the app store

[@edwardbond8775]

Found the parts and the video IS great. Just saying the links didn’t work well for me. Oh and I could be wrong cause I only read and write English but from what I take from the descriptions before the links it looks like some of the links go with descriptions on above links

[@a-ztube]

No problem my Friend you're very welcome 😉 👍🏽 By the way I checked the links from ali shanmao and Kevin Talbot because I watch them too 😁😉 but same for me like my links exactly the same steps 🤔Hmmm hope in the future maybe I can manage it differently. Nice regards Stay safe ✌️🏽 😊

[@benchirco6550]

Will everything work for the a979b?

[@a-ztube]

Hey my Friend, It should be the only thing is that the b models have bigger gears / pinion than the a models because of the bigger Motor. Nice regards

[@marionheard1474]

Where can I find this kit, I really want to upgrade my car 🚗

[@a-ztube]

Hey my Friend wich car? And wich color?

[@marionheard1474]

@@a-ztube It's the A979B, I would like the blue one.

[@a-ztube]

So these are all the parts.... For the metal gears you have to take others I can give them also to you one mom. Kit banggood.app.link/DUOtXhoVMdb?p=5Y130935228052016013 Bottom plate banggood.app.link/foorTyyVMdb?p=5Y130935228052016013 Alloy Rims Tires banggood.app.link/sRfI3PAVMdb?p=5Y130935228052016013 12MM Hex Drive banggood.app.link/D9OMJvHVMdb?p=5Y130935228052016013 Front Rear Shelter banggood.app.link/EXlvM0JVMdb?p=5Y130935228052016013 Servo horn banggood.app.link/QRONjkNVMdb?p=5Y130935228052016013 Servo seat banggood.app.link/XJ56CUPVMdb?p=5Y130935228052016013 M3 hexnut banggood.app.link/o6CKyaTVMdb?p=5Y130935228052016013 Shockabsorber banggood.app.link/d93MraWVMdb?p=5Y130935228052016013 Adjustable Rods banggood.app.link/qU3EWH2VMdb?p=5Y130935228052016013 Adjustable Motor Seat banggood.app.link/PFMQZnaWMdb?p=5Y130935228052016013 Sorry that is the right Motor mount you need a bigger one for the a979b Wltoys Upgrade 540 Adjustable Motor Seat banggood.app.link/45owt9vWMdb?p=5Y130935228052016013

[@a-ztube]

And these are the gears I could find for the diffs Iam not sure if the fit Metal Gear banggood.app.link/m5v2n9FWMdb?p=5Y130935228052016013 Planetary gear banggood.app.link/cMqFvRQWMdb?p=5Y130935228052016013 Hope that helps

[@a-ztube]

By the way try my coupon code maybe you can save money 😉 Code : BGAFF10off

[@oshanadikari6171]

How much did you spend in the end?

[@a-ztube]

Hi my Friend, I can't tell you exactly but it's somewhere between 70-100$ I think. Nice regards

[@chunganhtai]

How much does it cost for a full metal car?

[@a-ztube]

Without the brushless system and if you can vary on color etc. I think it's about 65$ - 85$ Nice regards

[@chunganhtai]

@@a-ztube thanks you!!!!!!!!

[@a-ztube]

Chung Tài it's a pleasure you're welcome Nice regards

[@landon_F]

Can u link the truck (:

[@a-ztube]

Sure my Friend 😊 👍🏽 Here's the a mine from the video and the B version a bit faster Wltoys A979 banggood.app.link/cZJeZyJ2Xeb?p=5Y130935228052016013 WLtoys A979B banggood.app.link/6mgFguM2Xeb?p=5Y130935228052016013 Try this code for 10%OFF code: BGAFF10off Nice regards ✌️🏽 😊

[@landon_F]

Thinks(:

[@a-ztube]

You're welcome 😊 👍🏽

[@pescaepicard9925]

eres Rápido todas las gomas estaban en dirección contraria pero lo corregiste de una jejejejejej buen vídeo

[@a-ztube]

Ola my Friend, Only English or German 😁👍🏽

[@Pollerizer]

Wait . . . if it's a "100% metal" upgrade, wouldn't the body shell also need to be metal like a real car? Just being half serious. Nice work!

[@a-ztube]

Pollerizer ha ha 😁 you're right my Friend 👍🏽 Thank you very much you're welcome 😉 Nice regards ✌️🏽😊

[@Pollerizer]

A - Z tube - Do you plan to bash with this upgraded truck, or is it mostly for display (either way, it’s cool)?

[@a-ztube]

Pollerizer no my Friend 😁👍🏽 wltoys models aren't the best for real bashing but I love them you can check my video from the Xinlehong Q903 that's an crazy little basher 😉👍🏽.... I made him now to an drifter look My last video from the 100% metal series Wltoys A979 100% Metall Drift Upgrade Nice regards 😉👍🏽

[@Pollerizer]

@@a-ztube -- Very nice! There are a number of videos on your channel I plan to watch. I ordered a Xinlehong / Hosim 9125 for that reason: relatively inexpensive and intended for bashing with relatively affordable replacement parts.

[@a-ztube]

I love xinlehong / hosim really my Friend totally worth the money good choice 😉👍🏽

[@SmoKyWho]

Can i do this in my A959-B??

[@a-ztube]

I think so do you want to keep your esc servo and stock Motor?

[@kepekmini5674]

link buy full metal ready pick please..

[@a-ztube]

Blue banggood.app.link/ZD9yW75KEfb?p=5Y130935228052016013 Bottom plate banggood.app.link/QW3edV8KEfb?p=5Y130935228052016013 Full Build banggood.app.link/ASku8XbLEfb?p=5Y130935228052016013

[@rickynelson9647]

how much did it cost US dollar

[@a-ztube]

Without brushless combo and transmitter receiver combo I think somewhere about 120$

[@MrJackydose]

Gibts das auch im set?

[@a-ztube]

Grüß dich es gibt einmal dieses Set da ist das meiste schon enthalten [47,49€ 44% OFF]WLtoys Verbesserte Metallteile Kit A949 A959 A969 A979 K929 1/18 rc teile from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/fLRsYMire6?p=5Y130935228052016013 Oder hier ist wirklich das Auto schon komplett aufgebaut [164,00€]Wltoys 1/18 4WD A959 A969 A979 Alle Metall RC Car Chassis RC Fahrzeugmodelle Teile rc teile from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/O7w5e6ore6?p=5Y130935228052016013 LG

[@MrJackydose]

Ich besitze erst seit 1 Monat eins, werde mal versuchen es selbst hinzukriegen. Bin zwar total Ungeschick und besitze 2 linke Hände aber mit deinem Video sollte es klappen....hoffe ich 😅

[@a-ztube]

Das schaffst du schon nur mut 😁👍🏽 Wenn fragen sind kann ich auch helfen 😉.... Und wenn du schon einen Wagen hast brauchst du auch 2-3 klein Teile nicht zu bestellen. LG

[@MrJackydose]

Leider war meins schon leicht beschädigt. Der rechte Vorderrad ist nicht gerade...geradeausfahren ist unmöglich leider. Vielleicht fährt er ja geradeaus wenn ich es hinbekomme. Stoßdämpfer sind ja keine dabei, würdest hier auch ein link reinstellen?

[@a-ztube]

Oh das ist,aber schlecht da würde ich mich melden was ist denn genau kaputt? Ich bin mir eigentlich sehr sicher das alles drin ist an links bis auf die letzte schraube 😁👍🏽 Hier hast du nochmal einen es gibt zwei Arten von Dämpfern [6,97€ 6% OFF]WLtoys A949 A959 A969 A979 metall Aktualisierung Stoßdämpfer 2 Stücke rc teile from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/KZI4z93Me6?p=5Y130935228052016013 Und die [5,17€ 59% OFF]URUAV Upgrade Metall Stoßdämpfer für WLtoys A959-B A949 A959 A969 A979 1/18 RC Autoteile mehrfarbig rc teile from Spielzeug Hobbys und Roboter on banggood.com banggood.app.link/IgUBzgcNe6?p=5Y130935228052016013 LG

[@zulkarnianbakar5536]

A979 and a959 that same ?

[@a-ztube]

Some parts a little bit different

[@antonioaugustobuenovieira3589]

Leandro, vi um anuncio teu no ML do C34, me interessei, mas na verdade eu gostaria de fazer uma troca, eu comprei um DM90 Land Rover escala 1/12, ele esta todo full metal inclusive amortecedores e com motor 360 com caixa de alumínio, bateria 2100 com carregador inteligente e outros acessórios, mas eu gostei mais da escala 1/16, tenho outros: C14, C24.....meu carro já esta por 1250 $ mas aceito troca ! por 1/16. Ah nunca andou na terra kkkkk o que eu gosto e de mexer!!

[@a-ztube]

Hey my Friend, Only in German or English please 😁🙈 Nice regards

[@antonioaugustobuenovieira3589]

OK

[@Mason-Dain]

Nice

[@a-ztube]

THX bro Nice regards

[@lexsub1]

A-Z tube,thanks,i still can't see your answer.its not showing up.its so frustrating,i can't build my car.im using your video to show me how to do it.thanks

[@joshchatwin8179]

How much did it cost