Repair Dyson V10 / V11 / V15 Pulsing & suction problems FIX

[@Bee-ye8if]

Thank You for posting this vid. It solved my "broken battery" problem. After watching your vid I checked for blockages. Funny enough attachment just above the brush was blocked. After removing build up of hair and dirt, my V10 works like it was brand new. Cannot thank you enough. Simply AMAZING.

[@parwaz7861]

I’m so glad to hear it!! Thank you for your kind words!!

[@JoannCuthbertson]

Absolutely amazing! Had no idea the canister came apart??? Saved us $700. Thank you so much!

[@parwaz7861]

Glad to hear it! I’m happy you found this video helpful 😁

[@lisakaye6471]

Thank you I cleared the blockage after I removed the canister, I had no idea that I could do that

[@justalexism]

Youre an angel. I didn’t even know I could a part the bottom and immediately it fixed my issue. I finally have a clean house again, ty! Simple and to the point and well said.

[@svenable567]

Thank you! I found my filter to have cat hair; I rinsed and even ordered new filters. That didn't fix it. After watching this video; I found the very last thing you showed to be the culprit. I'd had powdered cleaner delivered here and it was punctured so I tried to vacuum a small amount up from my hardwood floors. That's when this problem developed. Where you showed to remove the clear dirt canister and look at that last portal; it was almost impacted with fur and powder mixed! Thanks so much and I learned a great deal on maintenance on this dyson. I have a V10 animal. Again, a weight off my shoulders! A+++

[@amyeharris]

Omg I’m soooo happy to have my vacuum back!!!! The inner chamber was so clogged with wool rug fibres and cat hair, there was zero suction. Thank you for this video!!1

[@judipereira6697]

Thank you. You helped me solve the pulsating problem on my Dyson V10. I didn't know the clear piece came off. I never noticed the small red button.There was a larger piece of debris there. Thank you!!

[@patf6690]

I wish I could give your video 100 thumbs up. This sorted an ongoing problem for me. Thank you!

[@parwaz7861]

Glad it helped! ✌🏽thank you so much for the lovely comment

[@nicolebeck1269]

Thank you! I was about to send my V11 to Dyson. Been sitting unused for months!

[@parwaz7861]

Glad I could help!

[@nanaminako]

thank you SO MUCH for this video. i found it today when my v10 was pulsing and refunds to vacuum with certain extensions, i found globs of junk stuck in the heads and did a deep clean of the filter and it's working great

[@Ecksterphono]

If you put a section bounce sheet in the bin it reduces dander cling and the fine particulate sticks to the bounce sheet. It does miracles in keeping the screen clean as well instead of always tapping the canister in getting the fine particulate out. Works amazing.

[@parwaz7861]

Thanks for that helpful information!

[@kdm77]

Can only agree with all the other comments, straightforward and concise, Plus solved our problem, much appreciated

[@wyominghome4857]

Thank you! Thank you! Thank you! I had no idea such an enormous amount of pet hair could get stuck inside the head and wand! It's back to working like a charm.

[@parwaz7861]

Glad I could help!

[@ga-dx1fg]

Thank you for the video. My problem ended up being a clogged roller. There was so much fiber/cat hair wound where the roller connects, it couldn't turn anymore. Once I removed all the debris, it worked fine again.

[@aportgirl]

That was so very helpful. I’ve never watched any trouble shooting video that was as through as your KZbin. Now let’s see if I can do it all myself.

[@sjrueda10]

OMG you are the best . I did everything you said and I had so much dirt and paper clogging my filter. Thank you so much, you rock.

[@parwaz7861]

Excellent result, well done! Glad the video has helped ✌🏽

[@fakehoneypictures]

Thank you. The last part where you dismantle the bin solved the problem!

[@AmirSayid]

If it was not this video, I would have bought a new one! Thank you!

[@stephdaigle2900]

REAAALLY???! U have a Shitty Vaccuum and u would turn around and go buy a NEW one !? Of the SAME Vacuum?! I think they friggen SUCK!! I’m dog sitting at my gf’s house and this is the only thing she has to pick up dirt she doesn’t even have a broom! I coulndnt even vacuum a Small two bedroom apt without having like twenty different Issues and having to stop twenty different times !!! WORST VACUUM EVER!!!

[@gamjairevere2393]

Thank you so much for the information. Now I have my v10 dyson work properly again.

[@mercyakinsipe5576]

Omg thank you so much this is the BEST video ever It fixed my problem I had a bad clog I didn’t realize I could dismantle it like this 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽

[@parwaz7861]

You're welcome!

[@antoniodigregorio3261]

thx for the videoo!! after replacing the broken button v10 now the speed selector doesn't work. the dyson only runs at full speed. any solutions?thx

[@parwaz7861]

Sounds like it’ll need a new motor unit sadly, these digital motors aren’t designed to be fixed

[@U2fan24]

Awesome! I didn't even know the bin could come off. 😲

[@pramskins.pram.liners]

Straight to the point and well explained. Fixed my Dyson following this video. thanks Mate :)

[@emteachingvideos3917]

Thanks very much. If it was not for this video, I would have continued to complain about the Dyson. Cleaning the blockages in the rubbish canister is essential.

[@4uafunguy]

Why do you own so many vaccumes ?

[@rithikam1359]

Hey thanks for the video. quick question! I have a Dyson V8 and just noticed that there's a red flap inside the inlet mouth section of the bin. It seems to move back and forth freely and i was wondering if its broken and that's why it's moving around. Any idea?

[@parwaz7861]

Hi, the V8 sounds perfectly fine. It’s designed so that when the vacuum is in the charging position on the wall, the flap closes to prevent dust and dirt from falling out the vacuum, the suction of the vacuum opens the flap

[@rithikam1359]

@@parwaz7861 OMG that makes so much. Thank you so so much for replying ❤️ I can now go to bed peacefully 😂

[@vickeeh]

Hi! I will wash the filters and clean everything. And see if that fixes my problem. But my problem is that the heads are not spinning at eco mode and depending on which head it does not spin on med. the mother starts spinning for a couple of spins then stops. You think it’s the airflow or something electrical? (V11 absolute)

[@parwaz7861]

It’s definitely something electrical, the brushbars are powered by their own motors inside the cleanerhead. I’m not sure if it could be the floortool that’s faulty or the main motor unit of the vacuum cleaner

[@vickeeh]

@@parwaz7861 okey! It’s on all the different heads. On the soft one works on med and boost, same with the small head. The other big one on only boost.

[@parwaz7861]

@@vickeeh sounds like a problem with the vacuum unit - the soft fluffy floortool draws less power so requires less energy to be used

[@racstv4136]

hi my vacuum is not working after i clean the filter what will i do

[@parwaz7861]

Does the white filter light flash on the battery or is it just blue lights coming on? If it’s just blue lights the motor may be seized from a wet filter Or if the filter light is flashing with no motor sound check the filter is fitted correctly If it pulses on and off the filter or vacuum will be blocked

[@arlenetabian7184]

hi sir i mistakenly put back the damp filter, would it be still work? now trying to totally dry the filter

[@v.dupont262]

Nice and concise with info about filter first. Thanks!

[@cathyharron3255]

What if everything is clean and clear, suction seems like working OK but the issue is that where the head meets the floor, it's not picking dirt and crumbs up. It's just moving the dirt around? You hoover, it looks clean then when you lift the head up, all this dirt falls out in one spot?

[@parwaz7861]

Sounds like it’s either the filter that’s partially clogged within its pores or it’s partially clogged elsewhere in the vacuum, have you tried cleaning the metal screen in the cyclone bin?

[@lyndadoheny7950]

I’m having the same exact problem

[@aishemustafic1112]

Hi there. First of all thank you so much for this helpful video. My mom’s Dyson suddenly stopped suctioning. We tried all of your methods for cleaning it, but so far we’ve been unsuccessful. Is there any way you can help us resolve this? Thank you in advance!

[@parwaz7861]

Glad I could help! Everything to check is pretty much covered in the video, is the suction strong from the main unit? Is the bin fitted and closed correctly? If you have tried a new filter and the suction is still weak, there must definitely be a blockage somewhere Also try getting an air compressor and blowing the dust out the metal shroud when you remove the bin, the small holes can be clogged with dust

[@laurencehelgesen4541]

Hello! My suction pulses on eco mode only, could this be a damp filter?

[@parwaz7861]

Possibly a clogged HEPA filter yes

[@Q-T3K]

Great video mate - fixed my problem in 5 minutes!

[@Drpepper99uk]

Would a blocked HEPA filter cause air to come out from the filter itself? I've tried several filters and I've got a V11 with poor suction and I've noticed that there is a loud air noise coming from the filter area, not sure if using a cheaper replacement filter is causing the issue, or if there is an issue elsewhere within the vacuum.

[@parwaz7861]

If the filter is blocked then air will struggle to escape from the exhaust so the motor will start pulsing if there’s not enough airflow

[@Drpepper99uk]

@@parwaz7861 it was the central chamber which was rammed full of fine dust causing the issue in the end. Unbelievable amounts of dust and fluff inside it causing the HEPA filter to bypass air resulting in a total loss of suction. None of the included Dyson instructions or videos showed that this could be an issue, it's only because I'm handy taking things apart and rebuilding them that I managed to solve this issue. I do need a new filter now though as the original is worn out from repeated washing.

[@parwaz7861]

@@Drpepper99uk great work!

[@markyj23]

Great vid I especially like the details you give of the filter. 👍

[@Chuckmuch]

Brilliant video, thank you ❤

[@parwaz7861]

You’re welcome 😊

[@miracleplay9821]

v8 vs v11.. which one is better? in terms of longevity?

[@parwaz7861]

The V8 is a far more reliable machine, the V11 has more complex engineering

[@judyeinfeldt5577]

When sliding the canister open to remove the dirt the red rubber gasket and ring the holds it in place fell out. Can this be fixed?

[@parwaz7861]

It's either damaged or it might clip back in

[@stevemeadows1072]

My only have problems when its on the medium power mode, it works with the green and red power modes Any ideas

[@parwaz7861]

I’m not sure what it could be, it a new filter doesn’t sort it, it would be the motor most probably

[@steccrazy]

hi, is the container the same in these models?

[@parwaz7861]

All V10s have the same bin but they aren’t the same size and fitting as the v11 or v15

[@steccrazy]

@@parwaz7861 thank you

[@scottleo8363]

@@parwaz7861 nope, you are wrong. If you buy V10 or V11 in.different countries, the bin size is different

[@MrRichymil]

hi I recently fixed the trigger on my V10 put it all together again and it just kept giving me the blocked pulse and wouldn't work so I got a new motor unit, (vast experience). but it still wouldn't work was pulsing still. so I reckon it must be the filter have ordered a new one have had the filter for over a year has been washed many times. what do you think? the new filter should arrive later this week if that's not it then it's something else and it's confusing.

[@parwaz7861]

Hi the motor would only pulse when there is a blockage and there's not enough airflow, its usually the filter that's blocked due to the ultra fine pores, they can get blocked when washing them as the fine dust turns into mud so worsens the condition of the filter but if its not the filter it's absolutely blocked somewhere in the vacuum's ducting

[@MrRichymil]

@@parwaz7861 thanks I think it must be the filter as I tried a new motor unit containing everything but the bin. I've washed the filter again but have ordered another as it must be the problem you have described.

[@MrRichymil]

@@parwaz7861 Hi it's now working! Just gave the filter another wash out.

[@parwaz7861]

@@MrRichymil excellent result!

[@charmainegraham8653]

Good day I bought my dyson 3 days ago and my suction was only good the first day. I did all you showed on the video and it is still not the same as the first day. Suction very weak. What do I do. Please help.

[@parwaz7861]

That sounds unusual, I would get it exchanged because if it broke within 3 days that should not happen at all

[@piajensen5715]

My V10 cyclone clogs every few minutes. I have a dog that sheds and the hair gets stuck in the top area around the mesh filter. It doesn’t even get down to the lower part of the bin. I have several Dysons and never had this problem. Can you help please?

[@parwaz7861]

I think that usually happens when you vacuum up large items of debris and it gets caught up in the top of the bin and then the dust and hair gets caught onto it

[@matthewclark7952]

I have an issue with my V10 at the moment. It only works on the highest power setting, it cuts out immediately if you use weak or medium. Any suggestions?

[@parwaz7861]

What does the motor sound like on the lower settings - does it make a pulsing sound? If so, it indicated there’s a blockage somewhere

[@matthewclark7952]

@@parwaz7861 Thank you for your reply. It starts to make the normal use noise very briefly but cuts out in a fraction of a second.

[@parwaz7861]

It sounds like an electrical issue, it will most likely be the main motor unit that needs replacing although if that doesn’t solve the issue a new battery should

[@matthewclark7952]

@@parwaz7861 Okay, I will look into this. Thank you once again my friend.

[@arlenetabian7184]

Hi.. My first time to use dyson cordless vaccuum and i accidentally use a damp toothnrush to clean the filter..and then after an hour i used it. now the suction not working anymore. pls help.

[@parwaz7861]

The filter will need through washing, just a toothbrush won’t be enough to clean it unfortunately- the hepa part of the filter has very small pores that can become clogged

[@arlenetabian7184]

i already cleaned with running water and let it dry for a day. I put it back to charge now but the blue light is no longer blinking. pls help

[@parwaz7861]

Does the motor come on at all?

[@Libington]

Great video. No wasted time. Thank you so much.

[@Azanplayssomesteam]

Here’s another tip if you have a Dyson v10,v11,v12,v15 and your vaccum has no suction then empty the bin and then look at the back of the vaccum if you see a square hole that is blocked take off the dirt

[@kungfool69]

Thanks buddy, super helpful stuff

[@parwaz7861]

No problem 👍

[@noohalobeidli7837]

I have a Dyson v11 absolute, the machine is not working when I just press the on button I heard a sound if trigger only and Machine not working. FYI, battery is full and the filter is so clean, also the lines has no blockage. Kindly, need your advice Thanks

[@parwaz7861]

Dyson had to give a lot of main bodies away under warranty because the on/off triggers would break I'd contact them and see what they can do, either that or it's the battery/motor

[@coryanaka7315]

Watching your video I'll try on my v10

[@maryg7537]

Thankyou so much. It helped me so much.

[@Mag-ls2zs]

The bin on my V10 can't be pushed all the way and I don't understand why. I need your help vaccum sensei

[@parwaz7861]

Have you cleaned the bin and then discovered it won’t open? Usually the seals needs to be dusty so they don’t stick, it will just needs forcing otherwise

[@Mag-ls2zs]

The bin can open. It just won't go all the way. I need to wiggle a little bit the tube to make sure it holds to the bin.

[@parwaz7861]

@@Mag-ls2zs I recommend cleaning all the moving parts and runners the bin slides on with

[@rohinanaaz]

Hi...I am getting a weird noise on pressing the trigger. Can you help in fixing this?

[@parwaz7861]

What kind of noise is it?

[@Dustyscorner1111]

??

[@ceandralindor2859]

I’ve cleared all airways but the vacuum still isn’t suctioning. What does this mean? Is it permanently damaged?

[@parwaz7861]

It's deffo blocked somewhere, have you followed all the steps?

[@MyGreatCreation]

So I have a few problems with my Dyson V10. Sometimes it pulsates depending on which head I use. Also when I turn it to boost mode it does a quick pump and then stops and I can't do anything after it does that.

[@parwaz7861]

Definitely check the vacuum and heads for blockages along with the filter tip I mentioned

[@MyGreatCreation]

@@parwaz7861 I'll double check but I have a brand new filter. Also the first time I opened the vacuum all the way to the motor and I may have messed something up because the switch registers everything backwards. Like when I use boost mode it's just regular. But I'm gonna open it again today and try to clean the mesh part, and maybe clean the bin but atm there 0 blockages. Also does it usually spit out hot air from the filter? Like I meant hot like 42°c or around 90°f (rough estimates). Because of not then that's probably a problem.

[@LizCooper-nr1it]

Wish your video, I was able to fix my V10 Animal! It was clogged beyond belief way up inside. Thanks!

[@parwaz7861]

Excellent result, well done! 😄

[@shamhimself]

Thank you for posting this video. My v10 is unblocked and like new😀👍🏻

[@parwaz7861]

Glad I could help!

[@sydneywood4398]

Thank you! My new v11 was great and then it wasn't. I had no idea the canister could come off. I did know all the dust was clogging in the silver part and not going into the canister. I did not know there was that little window which I assume is normally where the dirt passes through and goes into the canister, correct? That was my problem and once I clean that out all is fine. Why does it get clogged in the silver section area and not make it to the clear canister? Simply by getting backed up??

[@parwaz7861]

Happy to help! It’s common for the metal shroud to get clogged because when the airflow is restricted, the cyclone efficiently reduces and clogs it

[@backtosleep]

You missed one area to clean. See those big bumps between the filter and clear container. Well they are passageways that can be blocked as well. Need an air hose with the filter off to blow passageway clear.

[@mr.anderson70]

Helpful video! Thanks!

[@parwaz7861]

Glad it was helpful!

[@crislabrador6869]

How to fix if the wand keep shaking if connected to main machine

[@parwaz7861]

They just get worn with age, the wand wobbles so either you need a new wand, cyclone or both

[@leiryshampagne1953]

Thank you so much ❤This video totally helped me unclog my vacuum.

[@renaprovan9189]

Still have problem with v10 stoping I 6 filters on the go

[@parwaz7861]

If it’s pulsing it must be blocked somewhere, does the problem still happen when you remove the wand?

[@renaprovan9189]

@@parwaz7861 will have another look tomorrow thank u for your reply I have went through about 10 filters so far

[@renaprovan9189]

@@parwaz7861 I still can’t it Dyson to work properly I’ve have tried everything you you said is there anything else I can try .Thank you. Rena Provan

[@parwaz7861]

@@renaprovan9189 honestly it has got to be blocked somewhere because the motors only pulse when they can’t breathe

[@kimperry]

I didn't know that you could twist off the top where the actual filter is housed. It was filled which was the reason for my pulsing issue. I had tried all the other tips in this video and nothing fixes the problem UNTIL I screwed off that filter.

[@luckymanindeed]

Very helpful. Thanks!

[@parwaz7861]

You're welcome!

[@afsheenmeghany1675]

Hi can you help me my dyson V11 is not working actually i wash tge filter its not dry fully and i start using it after the the main screen start flushing and than its stopped i tried to open hover head but its not open i unscrew all the things but still no luck can you help me in this matter thanks

[@parwaz7861]

Sorry I’m not sure what your asking, do you mean the motor stopped working after water got sucked into the motor?

[@jimbapolis]

Fixed my issue! thank you

[@EvanJS2005]

You still have the v10

[@parwaz7861]

Yes I returned it and then bought another cos they reduced the price

[@EvanJS2005]

@@parwaz7861 ok

[@notfallinforit]

My Dyson v11 goes a while and then stops, goes and then stops.. is it the battery?

[@parwaz7861]

If it’s a pulsing sound it’s a blockage, as for a power issue it could be either the motor or battery it’s hard to say without trying another battery or motor

[@Jessie-lt9mh]

Hi. My friend handed me her V10. I cleaned included the filter. I accidentally pressed the button with wet filter on it but it was just seconds (I know my bad 🤦🏻‍♀️ ) in short the vacuum didn’t work out. Please help! Thank you 🙏🏼

[@Jessie-lt9mh]

I tried again with dry filter but still it didn’t worked. 😭

[@parwaz7861]

It sounds like the motor has been water damaged unfortunately

[@donnaattanasio2705]

Thank you ! Solved my problem!

[@parwaz7861]

Glad it helped!

[@jasonjonston948]

Brilliant thank you deep clean inside bin sorted my problem note to oneself don’t try and hoover up half a box of Wheatos that you dropped drunk 🤣🤣🤣🍺👏

[@ameliaara9371]

Everything I cek it is clean..but still not working .then how?🥺is it need to change batre

[@Blu3y.P4wzz]

I got a new DYSON V11 and I still got my DC34

[@1Veefer]

Excellent ,very well explained

[@ErinScottberg]

Thank you!!! This was so helpful - never knew you could take the canister thing off!!

[@jamesharkness-s1r]

My dyson v7 seems to have to much suction

[@FreddioSmith]

Now I can fix my v10 :)

[@paunixon]

Fabulous, quick, clear video. Thanks, sir.

[@parwaz7861]

Glad it was helpful! Thank you for your comment

[@s-tiergaming6378]

I accidentally picked up some wet hair with Dyson V11 Outsize. I tried cleaning it out by sticking my finger in the opening vent. I did manage to get some hair out but will the cyclones end up getting clogged?

[@parwaz7861]

Should be fine as long as the vacuum wasn't overly wet, run it on max mode for about 30 secs and as long as the filter is dry I wouldn't worry

[@aslvolkandiewald7259]

Super helpful! Thanks👍

[@kulaycreatives480]

Hey man really helpful. Thank so much! ❤

[@parwaz7861]

Thank you for the lovely comment! ✌🏽 glad the video was helpful!

[@mikeyRay2]

Thank you

[@parwaz7861]

You're welcome!

[@smokepickle1]

Thank you so much! You saved the day AND my vacuum! Great video.

[@9999RAMZI]

Thank you, problem solved

[@mikebutton3175]

Great

[@Aaron-ge6ix]

Thanks!

[@kaylasherrard3076]

Solved my problem thanks!

[@fluff4115]

Thank you!

[@jokky3]

Min is V 10 and no bulges at all is clean but sucking not working at all

[@ms_123-d6f]

you saved me

[@davidbarraza2903]

Awesome!!

[@jimtheburrito4080]

My dyson is shocking biggest waste of money ever

[@parwaz7861]

Whys that?

[@scottleo8363]

Because it breaks down like this after few years.

[@Mr.RyanButterly]

G that’s gonna suck. He he he he he

[@amysumayod538]

Hi!have a nice day!Ianyone can help me?my vaccum suddenly not working,but I saw the battery blinking isit the battery problem?it is possible I can fix?I'm hoping anyone here same problem 😂 thanks and Godbless

[@parwaz7861]

Hi, sounds like the battery may be the issue as they generally fail with age

[@ameliaara9371]

@@parwaz7861 can u help me please?already clean all but still not working..is it need to change batre?

[@parwaz7861]

@@ameliaara9371 if there’s red lights displayed then it’s a battery issue, if the blue lights shoe then it could be the motor unit or even the charger

[@ameliaara9371]

@@parwaz7861 so u mean need to changes charger?..but I Carge it's 100%

[@ameliaara9371]

@@parwaz7861 use about 1year only🥺

[@christeltoma4708]

Thank you for posting this🙌🏼

[@parwaz7861]

You're absolutely welcome!

[@stephdaigle2900]

By far the WORST VACUUM EEEEVER!!!! WHy would Anyone EVER pay that much money for these ?!!! Older vacuums have WAAAAAAY BETTER Suction and u also don’t have a gazillion issues every single time u try using them !

[@scotland8]

Not very in depth. There are better in depth cleaning videos. Very light and obvious.

[@larajhilton]

Thank you!!!