SAMSUNG QE65 QLED TV Horizontal screen lines repair successfully

for. tv software. or tv box android firmware. or radio code. or more. go here repairalltv.com/
the picture on the tv screen with lines after 20 seconds turns off and on. every 5 seconds. tv
repairalltv.co...
SAMSUNG QE65Q7FNAT QLED

[@KraigsterProductions]

I bought a 75in LG for $60 a month ago. I have been struggling with the display constantly freaking out but after watching your video, taping off the exact section you had, the majority of the issues stopped and it was usable, probably need to tape off another section to stop the problem entirely but I greatly thank you for posting this.

[@D0M36]

Thanks so much for the video. Saved me money for repairs! It was a lot of trial and error, so I had the colour issue people mentioned and I also had a lot of times where the strip of tv wasn’t working at all, just kept playing around with the electrical tape and finally it worked. Thanks again

[@mech387]

Did you cover only one pin by trial and error to get rid of the line and also keep the colours?

[@sellomahlo9034]

Thank you very much for enlightening us with the repair techniques on various tv`s I have really gained a lot more. keep it up.

[@rebeccapapadesima3405]

😂

[@dicasdef800gs]

The boy full of sophisticated equipment. doing workaround

[@jefersonsantos4307]

after changing the smd resistors of my TV ks8000 these lines appeared, I did the procedure with the tape and now it works perfectly. thanks and congratulations for the video

[@a2_3ler61]

Hello, Can you tell me which resistors you have changed? I have an UE75KS8090 TV

[@KyleSand]

Mine had similar symptoms and turned out to be a shorted diode/filter ic on the panel driver board (located on the far right and far left). Found it with a thermal camera heating to 80c. Removed it and the flickering stopped, and tv works perfectly. Rather than blocking the short with tape you might be able to remove it

[@pukyalligator]

Thx for sharing👍

[@user-ns2zp6te2s]

which diode did you remove, there are three of them. Is the TV working? Thank you

[@KyleSand]

@user-ns2zp6te2s the one that was hot, they all can be removed and the tv should work. Its for esd protection

[@IMRAN.AFRIDI]

The best video on smart tv screen.. Clear and genius explanation

[@cryptoerok4851]

This should be a class action. Every single model is affected by this eventually.

[@noneofyourbusiness7594]

Mine did this shit this week and cant get it fixed POS never again screw samsung

[@brandonb1947]

Mine tv has lines in it as well. Samsung TVs suck

[@ezlz2483]

Yes, we should start a BIG class action with Samsung !! My $5000 Samsung has the on/off looping issue just after 1 year and 4 months !! They said I need to pay more than $2000 to replace the panel !! So BAD !! Never buy again from Bestbuy and Samsung !!

[@uncommon8896]

I need to replace my Samsung and I refuse to get another Samsung tv... Bought myself a LG OLED

[@evydeva189]

Indeed

[@eduardoonk2059]

Your the greatest.. Just did the same to my tv and its 100 procent now 🎉

[@manaharlotia7233]

Excellent presentation and Demonstration.very neat n upto mark repairing. thanks for video. One request the display which you show on top can be moved to side so we can read it very easily. thanks once again

[@Androidu]

So in other words that pins was there to mess up the image? 😂 I'm not sure that you really repair the TV... But you did get over with that lines on the bottom as we see

[@tyronenelson9124]

I didn't think so either, that ribbon only needed unplugging and plugging in again and that would have fixed the tv.

[@n55m6a7]

A durat mai mult demontatul/montatul decât reparatul. Felicitări... 👍

[@bravo2xray]

*Thank You, you Sir have talent! Not only In electronics, also In making tutorial videos that are easily understood. Is there a way I can send you a short video of how my Samsung QLED Screen begins flickering when It has been on for 30 minutes or so? I shall look for your reply If possible. Best Regards From Texas!!*

[@Mr.Smith_Mr.Wesson_andMe]

Sounds like a temperature fault. Give it a try with freezer spray on suspected parts of the electronics. Maybe wiggeling the wires before could lead you to the right place.

[@bitsnbobs1969]

@@Mr.Smith_Mr.Wesson_andMe mine does same after 20 min has one one fixed it yet

[@smithbrownjones]

Technically this is just a hack, and not a Repair. The underlying problem still exists.

[@rollinhand4750]

you cover some pins on the connector .Waht signal the screen is missing ? how come there is no defect on the screen?

[@oscarsanchezbc]

I tried this fix on samsung q7fn. Jumping on the screen stopped. Awesome.. but there is loss of color and picture quality. There was improvement because jumping of the image made watching impossible.

[@Atipecomputers]

@@oscarsanchezbc same to me

[@rothmata4347]

@@oscarsanchezbc toda la razon del mundo oscar. se pierden los colores

[@wattscomputers9267]

I think the covering of some of the connectors pinout should be highly clarified, eg some voltage missing etc..though the problem got solved, we didnt realize the exact cause of those horizontal lines

[@dominicrivera4300]

I tried the same and I dont mind if the colors change, im colorblind, but my TV doesnt turns on correctly when I try to cover 2-4-10 Pins. Any ideas what I could try?

[@jkodde3561]

Prima uitleg en het werkt. Mijn TV werkt weer als vanouds.

[@adonitislami763]

Brravo te qoft Respekt per ju 👍👍👍👍e kam me rregullu ni Display

[@adonitislami763]

E kam me rregull te Display shkruma ni mesazh WhatsApp [phone]

[@jaimefranciscorodriguezven6612]

Thanks, horizontal jump was corrected. But now the colors in the middle of the screen look dimmer (no color).

[@theodorwimbert452]

I have the same problem. Do you solved the Problem?

[@iMaTM91]

Yes, exactly this my same problem… can solve?

[@ski89lz58]

This fix obviously solves the image skipping problem, but it is tricked in the end, cutting off so many pins will not get a perfect image. In home conditions it can be repaired, 8 and 9 pin of the tape is enough to cut off then it does not jump and this is the maximum color that can be achieved.

[@AdrianLopez-sn3ei]

Thanks for the video!! I fix a q7f 55" with the same problem

[@glendeva100]

Did you have color problem after ?

[@Nevskyj]

Как оказалось такой телевизор 65-дюймов, открыть одному это риск и нервы в первую очередь, было легче отремонтировать, чем открыть -)) ...лайк...

[@user-yz2qf6cw1f]

а как дефект проявлялся? Так же как в видео?

[@Nevskyj]

@@user-yz2qf6cw1f 1:14 -1:30 видео , так он проявляется...

[@cocheirododracula126]

I fixed my QN55Q7FAMG thanks to your video, thanks you. Keep the good work

[@RepairAllTV]

I'm glad you had success

[@salvorussovideomaker386]

what contacts have you covered what are they for?

[@BurnedUP78]

Information lines, this way it only depends on the other side of the screen, affects a bit the image but not that much

[@RiccardoSportelli]

Sistemata una 65ks9000 curva stesso difetto, stesso punto della tua del video, i colori sono rimasti uguali a prima e non salta +, grazie infinite della dritta, un saluto da Napoli 💪💪

[@luigip4129]

Ciao Riccardo, ho il tuo stesso televisore con lo stesso problema, un centro di assistenza Samsung mi ha chiesto €800 per il cambio del pannello... Dici che posso provarci? A distanza di tempo com'è andata?

[@mohamadaldarwish6678]

Thanks for sharing this... I like your job... 😍 i watch all your vedios.. You're clever an smart... From Syria .. GOD BLESS YOU 🌹

[@bajradabi7848]

Respekt zoteri ,qetash e nreqa nje tu ju falenderue videos tane.veq perpara

[@danieljohansson9650]

Great video. Some english commentary would be great going forward. Liked & subscribed!

[@MrReeceyburger123]

Look how far over the pins have made connect to the connector. Possible for the pins on the board to have moved over and shorted causing this ?

[@antoniopessoa7245]

Excellent ! My TV 55Q broken this year. I Will go tô try this repair. Congratulations ! If my TV goes ok, I will return to answer you.

[@ludo51136]

Did it work?

[@user-mf1en7pp3q]

Супер!Отличная работа. Но матрица замыкает, дай бог чтоб работала дальше!

[@Didou07yess09]

thank you I really like your videos it's a treat I say hello to you from Algeria.

[@sawan2269]

Thanks so much for making and sharing this informational video.

[@wisher21uk]

Bravo excellent those screw less Samsung’s are a pain to get into

[@user-gh2os5fu8u]

Мастер красавца трудяга спасибо что делишься сваим опытом👌

[@betadech5375]

Thank you bosque...i am BETA from makassar indonesia

[@BEASTNYC]

hey boss, what's the name of the small metal part within the TV back panel - where you screw the screw to mount the TV.... two of mine broken.... need to get a replacement part

[@user-pt5rp9qi5u]

Thank you for your good knowledge, great teacher.

[@jamestomkinson8474]

How do you know which part of the ribbon to cover up? Or does it not matter as long as part of it is covered?

[@n8lbv]

Notice that you did not get any response... It's just another magic tape video... which I would expect not to work. Somebody just copied somebody else's magic tape fix. Your question needs to be answered in order for any of this to actually be useful or applicable to anything.

[@FrozenHaxor]

@@n8lbv No, this is a legit fix. These are feedback lines, breaking the connection fixes the issue but affects the image quality as the board only gets the signal from the other working side.

[@yNSPIRON]

Thank you for sharing. Very helpful. How about if vertical SINGLE LINE (green) in which I am experiencing right now. Appreciate...

[@akramnazeir5505]

well done , plz what's the names of the insulated signals, thx

[@talolusrinivas7448]

Hi there I've done the same the line have stopped but half part of screen goes black and white Is there a solution for that. Could you please help me out on that problem

[@rothmata4347]

fake results. the colour is part missing. tell the truth. that mode you are blocking clk signals that produces double image but you also block colour sync signals that you need. be honest.

[@abdelbelhammou5221]

Hello, thank you for your video. I have the same problem but on 3/4 of the tv and not on 1/4 as on yours. Should I do the same as you or increase the amount of scotch? Thank you 👍

[@a2gomez487]

Muy bien video bendiciones y saludos desde Oaxaca mexico

[@leoluna6606]

Nice toturial vedio and Good job sir..

[@G00NERJ80]

You forgot to put the speaker modual back in before you closed it up!

[@sel2179]

Thanks was gonna chuck my tv away managed to fix it that’s to this video

[@ttec25]

Just put in a new ribbon simple, but great clip 👌

[@user-hk1pc9ju8x]

Vary nice 👍 Thanks 🙏👍👍 India

[@jeronimkova]

Hi! First, big thanks for your effort, really appreciate it. I'm also an unhappy owner of a similar TV, QE55Q7F series in my case. One day, the picture showed black horizontal lines and desync in bottom part, thus I tried to cut off the pins as recommended. When cutting off the pins 1-15 (as in the video -- since I'm having the problem on the right side of the TV, the pins are numbered in oposite order there), the problem was solved, but the colors were washed-out (particularly red, which went to orange-brown in half of the picture). I tried to cut off every single pin one by one and found out, that cutting off the pin 3 is enough to get the picture without horizontal lines. However, even with this single pin cut off, the colors are still washed-out. :-( Please, do you have any idea, what to try next?

[@ledu035]

I have the same. Do you find solution?

[@mech387]

I had the same issue. Any solutions?

[@zokonjazokonja]

probably you need to change T-con board. In this case in video is also probably problem with same board, but issue is patched up by isolating some of the pins without significant picture degradation.

[@FrozenHaxor]

@@zokonjazokonja T-con? What are you talking about... these models don't have a T-con for years. It goes straight to the logic board.

[@SuperKing5150]

Great Job it helped me repair my own Screen... But a question thought why does the screen have a blue tint to it, I know the camera will make some screens have a blue tint to it but how do you remove that blue tint?

[@djaffarakkouche825]

RepairAllTV thank you

[@berczigabor]

"Repaired". You keep using that word, but I don't think it means what you think it means.

[@dragoslaur3962]

That bicause he cut one power line ,the lcd is made with two power lines ,so will not last long this fix..

[@FrozenHaxor]

@@dragoslaur3962 Power lines?? These are logic lines, and this "fix" will result in working TV but with washed out colors and degraded picture quality on that half of the screen.

[@honestreviewsyoucanuse]

@@FrozenHaxorI used the same method and I see no picture loss 👍🏾

[@FrozenHaxor]

@@honestreviewsyoucanuse This is why there are feedback lines to begin with, every panel is different. On most you will see terrible contrast and very lacking color after doing this. You just lucked out with the panel parameters.

[@burbos]

Don't you have horizontal lines since you block some signals?

[@rhonmharl3436]

watching fr0m philippines

[@wxrld9684]

@RepairAllTV have you ever managed to remove these fancey stainless bezel/trims seen at 15:42. Ive seen every trim & lcd removed apart from these premium models.

[@bajradabi7848]

danke für die video,ae hat funksioniert

[@itechfone135]

Very nice job Bro! 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@RepairAllTV]

Thanks 👍

[@samd3231]

JUST INCROYABLE !!!

[@ArvindKumar-oz6jg]

How to fix a single vertical line which came right after changing a speaker, possibly opened my tv incorrectly, it's a samsung 55in curved TV

[@spankedbywife1018]

well what was that part of the ribbon cable for then, how is it that we can just omit that area and its fine, why would they not just leave it out at manufacturing?

[@simbosimbo]

Wow your a God of the tv repairs wow wow wow ive learnt so much watching your videos thank you for sharing.

[@anoniem012]

Mushrik kafir

[@user-bq8oe4xn3p]

довольно простой метод подбора коротящих каналов, я так подлатал xiaomi 65es, который похоронили многие мастерские Москвы

[@vgopalt4922]

Thanks for the video. But Is it correct way to repair on permanent solution. If the dc power / signal stops by pasting plastic tape, might be corrupt another component ? Any circuit designers, please explain !!!!

[@vishaldhankhar5846]

Hi, I did the same. The lines issue got resolved but the colours of that side are faded. What can I do to get all the colours?

[@elshanidriton8591]

super , une kam problem me Q700 , 8K , 65 dimensioni . me thone display - por po me kushtone me shtrenjet se vet tv ja , ke mundesi te me ndihmosh

[@bluepanther53]

Hi so i tried this and was able to fix the blurry horizontal lines, it worked well for a moment but now I have a vertical stripe on my right side of my screen please help

[@n8lbv]

Another "magic tape fix video. Nobody ever explains anything about this. What is broken to begin with and what is covering associated pins actually do? There are so many combinations of pins that you could cover, how do you know which and how many to cover? And what is this actually doing? and how did you know what to do? And why does nobody ever explaining what it is doing? This sems to be a good video but nothing technical is explained or how you would have any idea what pins to cover or why covering pins mysteriously would "fix" anything. You are now missing signals that the panel needs or was designed to use. How is it working without them now? This makes no sense... And I do NOT have the same exact TV but have s similar problem. It would be helpful if I could understand what is being done at a technical level and why this video was posted. I would like to learn more.

[@majedsabouni2755]

How to repair the QN55Q7FAMFXZA jumping picture?

[@tvbobbyd]

I have played with different problems on Samsung ribbons with different results any bandage that saves these high end TVs is a plus

[@miltonpillajo4135]

Congratulations brother, one question the time of garanty ??

[@georgesirbi89]

At the end, You forget the speakers!!!

[@RepairAllTV]

good that you told us. we too are human. even we make mistakes sometimes.

[@sypeng1222]

After identify left or right side. Which side of flex cable should tape.

[@zolivenet]

you are the best !

[@b4lisa]

I wonder how long the tape method does it last ? Thanks

[@GopiGopi-px3hc]

Great work sir

[@awestner]

I have a QN55Q7FNAF TV. The right side of the screen is starting to detach, showing the white background screen. Do you have a video on how to keep the screen attached? Right now I'm using small clamps to do the job.

[@ecopal3464]

I wanted to ask if the problem with my TV are vertical lines, if I have to do the same procedure. Thank you

[@acksaray]

first off all thank you , second i have samung 55q7f i have same probleme and i have smal video of my prob , can you help me ?

[@ijlalkhan1731]

What should I do My Samsung Tv QLED QA65Q9FNAk screen on and of Itself

[@josereyescj5624]

Thank you very much!! 🔥🔥🔥🔥

[@ezzhammer]

On my QLED 75 inch series 7, I'm getting these lines on the upper part of the screen. If I apply the same principle, do you think it will fix the issue?

[@HiddyMHS2423]

Hello. my tv start like this but now its totally black screen- does the tcon need to replace ? or it still can be repaired?

[@jordanliaw]

Hi I've tried using the same way as what you show but after i remove the film thing and switch back on the screen show blank with light screen light on. But if connect the film back and turn on display back on it. Like that i cant be able to see which having problem

[@harycare8390]

if flexible isolated like that , any fuction lose or not working , or influence to picture quality

[@AchimderKiller12]

Why is it so when you get a stripe on it that the picture is well?

[@user-ns2zp6te2s]

I've done the same the line have stopped but half part of screen goes black and white

[@alfiaziaz5387]

thanks. Greetings from South Sulawesi

[@pdrfrzpdrfrz8107]

Hi man, do have tv 50“ which i damaged opening it on one corner. Now tv works but I see vertical and orizontal lines and have got two small black holes, one on the left lower corner and the other just 5 cm over this last one. Do you think guys I'd have any possibility to repair it diy? Thanks

[@rishisonoo7997]

How do I know how many connectors on the ribbon cable I need to tape over? I have a samsung un55ks8000fxza.

[@andythomas7931]

So the end of the ribbon contacts aren't used since the picture is complete but the lines are gone. I don't understand why part of the screen isn't missing at the edge since the contacts are covered by the electrical tape.

[@FrozenHaxor]

No, they are communication lines that get a feedback back to the board, blocking the faulty signal will affect image quality slightly, but will stop synchronization issue. This can be fixed a lot better by finding shorted out component on that driver board and replacing it.

[@radhakrishna59]

sub titles are not clear. please change font and colour (put contrast). diologue is important not background music. reduce the background music. video stability is missing. moving constantly.

[@IlieProduction]

Un mare like,eu sunt mereu alaturi de tine si activ pe canalul tau,imi place foarte mult ceea ce postezi si de aceea te urmaresc de atata timp.

[@steveevans7046]

I have four separate ribbon cables from the t-con board . If I disconnect 1 I get no image . How do I know which one to choose from please?

[@bernhardjanssen9284]

You losing so much time to open the back cover then to repair tv !! Bay the way GOOD JOB !!

[@oscarsanchezbc]

I have a qn65q80tafxzx it has practically the same problem. So i tried this fix. The jumping stopped but now a part of the screen has poor colors. Is there anything else I can do to improve picture quality.

[@Atipecomputers]

i think yo0u are covering some pins you shouldnt cover

[@oscarsanchezbc]

@@Atipecomputers I was very careful to cover only the pins shown on the video. Do you have anything I could try?

[@marcorosendahl7247]

@@oscarsanchezbc no jay nada uqe se pueda hacer. falla el driver. les pasa a todas las Q7F del 2017 y 2018. el video este es una solucion a la doble imagen pero te deja la tele sin colores y cn degradado de tonos. es decir una mierda de reparacion. de momento no hay solucion posible.

[@oscarsanchezbc]

@@marcorosendahl7247 gracias amigo. Ya me deshice de esa tv. Salia muy caro remplazar el panel.

[@adam.gizlin]

Any video on how to fix qe55q7f 2018 ???

[@ZinnHUEBR]

Another guy just covering the connection without a single educational explanation or schematics...

[@ghozalirachman26]

thanks.....Mr

[@Mr-ow3mk]

I have a q6 it has a light glow in the corner of the screen it appears about a minute after I turn it on and depending what I'm watching it will wash out the tv you have any idea what it is I need help