Whirlpool Gas Range Disassembly - Range Repair Help

[@yaimamess1111]

OMGoodGod, this has got to be the best DIY fixit vid on all of KZbin, no annoying music, babble and you don't miss a step from beginning to end. Subbed for sure. Thank you!

[@ramachandran8666]

It is one of the most comprehensive and succinct how to video for such a common home appliance. Very helpful in both troubleshooting or most importantly being able to open and clean all the parts of a modern gas range

[@friartuckfriartuck]

maraming salamat po!!! MABUHAY!!!

[@bmxvii]

Very helpful. Thank you!

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@stansaraczewski610]

My clicker on stovetop will not fire at all... Gas flows and we use a match lighter stick. Oven works and control panel works... What am I looking for? The video is splendid and thank you...

[@josetorres6502]

Outstanding. Sure it looks easy. Will buy parts from ya For sure

[@repairclinic]

You're welcome! If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review Have a great day!

[@nicholasclifton6221]

Thanks for this, very helpful video. Was looking for a owners manual but this was even better. Thanks so much!

[@bmxvii]

@repairclinic which side of the in er oven glass faces the inside of the oven. The shiny side or the matte side? Thanks!

[@avisaurus]

My 2018 stove had screws holding the top on. Removed knobs, removed cover plate behind them with 2 screws. Once removed, access 2 screws that hold the top to the brackets.

[@paulhomer6541]

I have a bottom drawer problem and Nothing mentioned about it.

[@haxyquinn]

Thank you i fixws my kitchen thanks to you guys

[@marshabrown6675]

Very helpful

[@garymeroff3297]

Great video it really helped me to reinstall the stove parts. is there any idea why my stove igniters come on when I plug in my stove ? I did spill a cup of coffee on the top of the stove and I cleaned it up on top. I did open up the stove top to see if something it was wet but it was dry. I checked to see if something was wrong or not connected and the breaker went off. I put everything back together but when I turned on the breaker and pluged in the stove the igniters turn on and try to ignite but doesn't stop. When i plug in the stove to the wall the igniters stay on even after I turn each burner on. Please help ! any suggestions would be greatly appreciated : )

[@rogerwiltshire9325]

What size screws hold the burner assembly to the burner base ? All my screws have disintegrated and I have to replace them.

[@Beauty_215]

When replacing inner glass which side faces up the smooth side or the other texture?

[@Robert-ed8bo]

Thank you

[@donschneider3687]

i recently bought a used whirlpool convection oven and had it installed. Stovetop works great, but there is a very bad odor emanating once I preheat the stove. My suspicion is that there is a mouse corpse somewhere in the insulation, possibly between the oven and the exterior wall. Any suggestions on removing side panels to look for dead mouse? Thanks.

[@augustesmith6271]

I am looking for an complete gas tube

[@greeneye2004]

How to order the red and grey wire harness that connects to the oven ignitor for similar whirlpoolgas range model?

[@robertgare8949]

Any idea why one of these stoves would have no power at all? Bad control board? I haven't opened the back up yet. I had them make sure the unit was plugged in and the outlet itself had power. thanks.

[@neilbukouricz1395]

The stainless trim on the front of the outer door assembly keeps coming loose/falling off. Does anyone know how that trim is secured to the door assembly?

[@clintballack9991]

Have this same model, but the oven doesn't work. Changed the igniter and still doesn't work.. any help or info to source the problem?

[@Snypersystem186]

I find it impossible to remove the knobs off of a Whirlpool gas range 4 burner model wfg320m0bs3. Are there whirlpool ranges that require more work other than just pulling the knobs off?

[@sarasimchi5470]

Some of the screws are stuck in place on the range (grease? caked in?). How can I remove these?

[@marcusmack7099]

does anyone know which model is shown in the video

[@Joebong1]

what if the burner head screws r rusty n non existent

[@celesegonzalez9990]

how to start the stove if its not lighting

[@belon2theOne]

great video.. but I wish if showed us where to find the model#

[@repairclinic]

Click here to see how to find the model number on a gas range: kzbin.info/www/bejne/jKPNoX-qgrpgkM0

[@belon2theOne]

is there any chance that you do have the model number for the oven in the video above? because my oven is just exact the same.

[@lanceleggins4118]

We have the exact whirlpool gas stove

[@TVInformative]

I can't remove the bottom floor. It's stuck

[@Benicio_Fols]

I have one like that one

[@janetowens6512]

It's flashing a code f5e1

[@aditikarulkar6128]

I need to clean my burners, do I have to disconnect the plug and turn off the main gas supply?

[@rachel14rod]

Yes!

[@judycook3275]

How do you change bulb if it broke off but metal part still in socket

[@danagerds]

use a potato

[@JamieTransNyc]

Unplug the oven from electric power. Stick a screwdriver into the broken off bulb, and unscrew it