Рет қаралды 17,488
This hammer may be 22 years old, but that is not uncommon.
Cared for, Makita hammer can easily last decades. I get both makita and bosch hammers in every week that can be 20 years old and still working and earning their keep.
The only time I normally see them distroyed and not worth repairing is from operator error.
When they do need work or develop a problem, lads tend to keep working it until its completely shot.
So if you have a machine that is not working right, or you know something is wrong. Get it checked over. It could only be a simple cheap fix.
But if you leave it and keep working it until it packs in. Then I can guarantee that cheap fix will then become an expensive fix.
This one was also ran for far too long with a bad bearing. But at least the customer stopped when it jammed up. I have seen many others simply hold on to the trigger until it lets the smoke out.
This Makita has clearly been well used and abused, but with just a few beatings and some grease, it's back earning money again.
#makita #tools #repairs #hm1202c #notrunning #willitrun #tools #brokentools #machine #machinerepair #makitahammer #hammer #kango #demolitionhammer #toolrspair #toolteardown #siezedmotor #fix #repair #restore #restoration #rebuild #howto #howtofix #problemsolving