You have to be one of the most interesting people on KZbin and consistently put out phenomenal content. I could never do this sort of tedious work but know enough to have tremendous respect for those who do. I watch because you make the topic interesting and and teach me how the things I use each day really work. Your videos can't not have a reach. Thank you for taking the time to do this.
@rossmanngroup9 жыл бұрын
revo331 Thank you.
@BigNate849 жыл бұрын
I just binge watched about 10 of your videos. This is better than Netflix. You crack me up Louis.
@blackhoodproductions37399 жыл бұрын
I have a suggestion for your flux transfer, just use a pick. It picks up the perfect amount of flux that you need. I use one because I don't have my syringe anymore as well. it works very well for small surface mount work. I love your videos man keep up the great work!
@mictaste9 жыл бұрын
I just wanted to say thank you Louis. I just fixed my first board with the help from your videos.
@bme779 жыл бұрын
Hi louis your videos is very edicational for young players. I am ups electronic repair enginner.I have smd tweezer meter and i had to say is very easy to use.Further more your bench is out of multimeter cables and you take your measurments very fast.You should try it!
@HazyIndustries4 жыл бұрын
I learned something, I need to send my unit in to you from the UK. This must be the same fault on my 2009 13”. Since I was sold a dodgy car charger that fried it, I replaced the dc in but still no joy. And that’s as far as my skill goes.
@lagman89089 жыл бұрын
Greatings from France!
@bughsoftheworld9 жыл бұрын
How do you know the solder won't solidify elsewhere apart from where you actually want it to go?
@johnnymartini10729 жыл бұрын
I love your channel, your repair videos are awesome. greetings from germany
@nahwed68959 жыл бұрын
What flux do you prefer for reballing or soldering components? Used accidentally conductive flux and burned board hah
@marcosmarcos97244 жыл бұрын
WHERE can I find the wiring diagrams?
@sargfowler96039 жыл бұрын
For a syringe, I used one of those ink cartridge refill kit syringes. Works great. Or see your local drug user.... Thanks again Louis
@Atetus949 жыл бұрын
15:30 - this is that double MOSFET? Respects from Poland (in Europe ;))!
@stephenwisdom34299 жыл бұрын
yes i view down hear in australia
@infowarrior4209 жыл бұрын
Would you be able to aquire a schematic for Xbox one?
@rtstealth2229 жыл бұрын
Good vid like always!
@samskiny40738 жыл бұрын
Hi Louis. Great videos. Thanks a lot from Russia. ) Concerning this video - how board works from power supply, and not working from charger? According to schematics you solder your power supply to the fuse f7905, exactly before non working resistance and Q7080, so how it can be true? Wether schematics is wrong?
@rossmanngroup8 жыл бұрын
+семен семенов The magsafe supplies power based on what it perceives to be the resistance at the time. The PSU doesn't give a F and sends power through regardless.
@samskiny40738 жыл бұрын
+Louis Rossmann think that it is done not by adapter, but by the dc in board. Now i fully understand what's wrong with my board. I have 2.6 to 0.99 V spikes in any point of PPDCIN_G3H rail. Most likely first problem is in resistors of "power sense". I would like to translate some of your videos to Russian, how can i contact you for the details about this?
@jonlifson54399 жыл бұрын
What microscope setup are you using to be able to get that good of zoom?
@rossmanngroup9 жыл бұрын
Jon Lifson Omano 2300S
@rtstealth2229 жыл бұрын
Good vid like always
@johnthompson36506 жыл бұрын
Power pads on a 2012 MacBook Pro logic board
@infowarrior4209 жыл бұрын
More videos please
@mankindapparel9 жыл бұрын
haaa - "my eyes have tested that resistor..." LOL
@leeleehz24629 жыл бұрын
where to look for drwings of mac and asus
@rossmanngroup9 жыл бұрын
LEE LEE H Z internets
@leeleehz24629 жыл бұрын
Louis Rossmann some models are very difficult to looking for。 for example ASUS A43
@rkan29 жыл бұрын
Yo, I think you really need to get another monitor for casting the screen, so it doesn't get so trippy every time! :D
@rossmanngroup9 жыл бұрын
rkan2 Which screen?
@rkan29 жыл бұрын
Louis Rossmann A second screen you can control open broadcaster from, so you can directly switch the feed and check whats broadcasting.
@rossmanngroup9 жыл бұрын
I've thought about it and it would definitely be a good idea that I want to do. As lame as it sounds, it's just about investment. I put about 27k total into the project of doing board repairs and filming them on site here, including employees I hired/fired, equipment costs, machine costs, etc. I'm just done spending any money at all. I look at it and it would cost less than $100 to just get some shit monitor I mount on the wall next to the desk to control OBS from, and I don't even want to spend that, because if I spend that, it'll be ok to spend on something else, and something else, and it just never ends. So I just cut it off altogether. Short of something dying that is critical to work, I spend nothing on building upon the current setup. Editing these videos happens on my beat to shit T520 with cracks in the case even. But good idea.
@rkan29 жыл бұрын
Louis Rossmann I get it,.. Just use a laptop with zonescreen or virtual monitor from VNC should be enough; Check www.zoneos.com/zonescreen.htm ;)
@VideoStefan179 жыл бұрын
22:15 i view from germany aaand i am thinking about sending you a MB2010 ;) or watch enough videos and learn stuff to fix i myself (aaand sending you $ like you said in a video a wile ago) keep up the good work!!!
@cultofsogga58637 жыл бұрын
blowed out capacitor)
@arcadebox5339 жыл бұрын
That fuse's father was a flea.
@kurtrichardson59649 жыл бұрын
Hi Louis I just wanted you to know that I appreciate your effort out of your busy schedule to help others in the field of board level repair you are a blessing. I have an A 1502 2013 Retina board 820-3476-A that has an amber light all the time even with battery disconnected I have been kind of struggling with could you help any suggestions are very appreciated. Be Well!!
@rossmanngroup9 жыл бұрын
+MacPC Tech That is a working board they always have amber with battery disconnected.
@OrbiterElectronics9 жыл бұрын
That resistor you pointed out Louis has a cracked lower solder joint too kzbin.info/www/bejne/baLZhWmDlNx6kKOo=8m36s