Replace Serpentine Belt NO special TOOLS required

[@lioncaptdanieltang2509]

Thank you.I did something like that 3 hours ago. One extra I did was a wire pull the belt upward and A SCREW driver to flip it and a bar to jack the tensioner, hard though.......managed to changed the belt. Amigo.

[@timothyockhuizen7339]

This is a quite effective trick given you have enough working room. It is rather not so straight forward on most car models; especially if you have little to no working room.

[@CthulhuOO7]

Never saw the end because I shot myself in the face.

[@Zachhwithanhnotak]

Good.

[@koshnaranek2317]

I didn't even make it halfway thru the vid.😋

[@TylerShowers]

God I couldn't stand to listen to that

[@rscrevolutionkrypton5130]

I'm more impressed that you were still able to write a comment

[@DiscoGemini]

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@waynejenkins1788]

“Just scoop” just scoop it up.... fml

[@lascellesgreenwood5937]

Wayne Jenkins lmfaooo

[@alexishoneyyy3578]

Wayne Jenkins 😂😂

[@AngelMike707]

Thank you Lyn; Thanks to you last evening I got my alternator belt on. event dough after losing my tensioner screw all the way, I still couldn't put my belt on just by using my hands. ( In my case I changed my alternator on a Dodge Stratus Rt 3.0) (This kind of cars has a tensioner screw ) Thank you very much again and Blessings!

[@qbanchk3]

As a woman learning to do her own mechanics, I fully support women in videos. But holy fxck! He needs to keep her out his videos. I don’t care, divorce her ass if ya need to. But I came into this video hoping to put my belt on, half way through I was so annoyed distracted and confused I couldn’t remember what the video was about 😂

[@podruznik1]

TO ALL OF US WHO WATCH THIS VIDEO ..SHE DID EXCELLENT JOB WITH BULL..S,,, VIDEO LIKE THIS PEOPLE GET PAY FOR POSTING VIDEO LOOK THE RESPONSE 273,300 VIEWS AND KEEP GOING UP NOT SO BAD GIRL I THINK YOU FOOL US ALL LOL THIS VIDEO WORKS AT LEST FOR HER LOL

[@iseeyou3347]

your pulley is broken

[@joesmith6524]

with that space i could do that belt in 5 mins , try a hyundai sonata 2.4 real tight!

[@prospectorproductions]

Somebody gonna learn to do something on youtube today...classic

[@JewelsKilya_518]

Lol I'm somebody today 🤣🤞😁

[@izzawigsis5331]

Yes, I am

[@deseremere]

Your friendly certified Mercedes dealer in El Salitre , Jalisco, Mexico is running 50% off this week

[@roryc6390]

Wow look at the play in the water pump and the broken jockey wheel that's why the belt came off in the first place lol

[@grease_queendockery148]

my first thoughts too lol

[@mandywomack1129]

And looks like they have a leak somewhere as well freaking crazy how dumb people can be if there is not the right tension the belt they will run into all sorts of problems I mean wow!!

[@jeffn1384]

It worked for me but I did get the 2 screwdrivers stuck between the belt and the pulley so I left them there for next time. The engine was a little noisy on startup but seems to have settled.

[@adictiveadictive]

Gotta be a joke 😂

[@pagesk2001]

Why didn't you use the lug wrench, to release the tension on the belt tensioner, I believe they are both 17 mm?

[@randomdudeontheinternet9926]

broken pully and waterpump. No wonder she did not have to release the tension pully.

[@algrayson8965]

Original FoMoCo Poly-V belt broke at 55,000 mi. Ford dealers didn't have any in stock. AutoZone, Advance, O'Reilly's, NAPA, Bumper to Bumper didn't have one. AZ actually had one by size but not by application! Installed it w/o the special tools. Regular socket (18mm) wouldn't go in. Got a through socket set at Harbor Freight for $20 shorty socket just barely fit! Turned the crank while guiding the belt onto the generator (slang: "alternator") pulley by main force. No guiding tools, no sandpaper tricks.

[@JadedGameTheory]

How to ruin a new belt: a tutorial

[@MsterLewis]

He hatin !!

[@mr.bobody4486]

Maybe for this model car. A lot of other cars don't have the space to do this. Obscured by the body of the car or other parts.

[@saradeyo9434]

Yesss sideways motors🙄🙄

[@Akx2515]

THANK YOU. I wanted to punch myself in the face after watching this.

[@SonnySideInc]

It gives me hope that I can do my belt, I have no breaker bar and can't move the tensioner, it's a different set up for the belt, but I'll use the new water pump I installed as leverage 😂

[@youtubeuser1204]

Thank you for showing us how to install the serpentine belt. It saves us money by learning how to do it ourselves.

[@GarnettM]

I hope you changed the Water pump before starting it ,Bearings are shot , PS you can do the ssme thing at the idler .

[@camilorojas1283]

Maybe we should ask the question why did it slip off to start with? Maybe that water pump hub dancing in the wind is the issue 😅 fix the water pump fix the problem or get good a putting the belt on with a screw driver lol

[@Michaelcarlgadwah]

My brain blew up midway

[@4runner4wd79]

17mm socket and a breaker bar is all you need to turn the tensioner. It’s not a special tool. Right tool for the right job.

[@leeamdagan3311]

then you scoop it up, you scoop it up.. this is now the sound playing in my head every time I buy crypto dips 🤣 on a real note I hope noone tries to put their belt on like this unless you're stranded on the side of the road in the middle of nowhere on a sunday.

[@sethc758]

Yeah that's a good way to warp a pulley or harmonic balancer real quick.

[@marissat5189]

Thanks for the hack!! Totally helped us 😄🙌

[@defafa9249]

Am more concerned about the people in the comments not mentioning the broken water pump pulley that is making it easy to put the belt on without a tool

[@930media6]

Thanks for the info!!. This method worked for me on my Kia Soul

[@pingpong9656]

I think you broke the top idler pulley - looks like it's missing a bit chunk.

[@DiscoGemini]

Not sure if it was the idler pulley but yeah...definitely looks broken.

[@johnnycage6132]

That's how you damage all your shit nice job not only will the belt snap off prematurely it's also dangerous👌

[@HarmanMotorWorks]

Just keep a ring spanner in the car which matches the auto tensioner pulley bolt size. That way you just use that spanner to crank the tensioner loose as required whenever you like

[@aaa8509]

I live in a tiny town were even told like that are rarely for sale. You can order them online but with current B's that takes months. I used a floor jack as a third arm.

[@lyndahobby2413]

Need new Alt - stripped 19mm tensioner nut frm replacing wtr pump month ago-used 3/4 scket & got belt off-replaced Alt & got new tensioner arm -have to Jack engine up to get only 2 tensioner bolts out- I’m in park lot at Starbucks so I want to blow up car now or find a hack to get belt on alt with old stripped nut tensioner arm and have about a nano micro area to work with!

[@BacktoSchoolBus]

That was one of the funniest things I have ever seen... and on this edition of crackhead mechanics we watch the crackhead shove a screw driver under a new belt onto a broken pulley and toasted water pump!

[@Hollywoood-ivan]

What a joke, no special tools she says, gotta love her

[@golvellius6855]

Did you used tools?

[@catherineoconnell3213]

The trick is get some else to do it lol!

[@toddmcnugget8869]

See?

[@mayorprobank]

Thank you so much! You saved my butt big time! 🙏🩵

[@zugnonid]

That bearing on the water pump is fried. look at all the play at around 2:44. Can't wait to see what tricks are up her sleeve that........... Lady you..... nevermind, don't want to make a novel on everything I see wrong.

[@jerryz1846]

we better not go to her house for Dinner.....lol

[@harlangarza3209]

When they say I know a mechanic just fucked that mans Mercedes

[@aaa8509]

Damn I didn't even think of that one. I used a half inch drive wrench and a floor jack.

[@brutusbigman8952]

How

[@aaa8509]

@@brutusbigman8952 the tensioner pulley has 1/2in square hole... I used the floor jack and the weight of the to push the pulley into place while I got the pulley on. It worked surprisingly well.

[@brutusbigman8952]

@@aaa8509 thank u man appreciate it so much

[@thaddeauscaldwell7101]

First thing I noticed was the broken plastic pulley and then prying the belt on the pulleys and then the bad waterpump and I thought OMG. The name if this video should be "This is how not to put on a serpentine belt ". Some people want the Mercedes but cant afford to have them maintained properly , so they have to do the best they can , to get by . I'm thinking that they didn't know how to loosen the tensioner ; it would have been a lot easier and then been adjusted correctly.

[@captaingrizzly5698]

Scoop it up scoop it up scoop it up.... scoop scoop ......scoop it up scoop it up scoop it up .... no tools....

[@amritbhogta9341]

Plzz help Brother... How many belt size... Say now..

[@amritbhogta9341]

Number size

[@quentingolden6407]

The real help rn would be removing belt without the tool. Putting it on is easy

[@Akx2515]

I disagree. Cut the bad belt off. Putting it on has taken me hours

[@natescott941]

Where I come from, we call this "Nag-splaining"... oh, and corner-cutting. I usually just stop what I am doing and hand the tools to the "nag" in question and say, "fine, its so easy, go ahead, I'ma get me a beer now."

[@ninaray4479]

Hmmmmm guess I'm in trouble huh??? Gotta do it myself awwww... just see me cry...

[@MrAnthonyC13]

You're worried about a serpentine belt, when your water pump pulley is shot. Lol. Fix that with no tools

[@judahanderson3906]

I partly disagree with all the commenters below I thought it was a great video, but I also could not get through the half of it... it's such a terrible video, "...heres the best part" 😂

[@toddmcnugget8869]

I found that the lady in the video has more balls than the pussies in comments. At least she tried. The video made me smile, good entertainment.

[@greencable2222]

if you depress the belt tensioner, no need for tight fit

[@tiberiusclaudiusnerogermanicis]

I know 😂😂😅.. I mean.. tensioner but she's installing it like a stretch belt. Wheres the need for "special tools" 😂

[@DiscoGemini]

That tensior looks super loose and it appears to be damaged.

[@Visionery1]

You must be very experienced doing this, I can't see the belt lasting very long after being abused like that. There's only one way to do this job, that's the right way... this isn't it.

[@savannahhewitt4290]

Saving money on labor we can buy as many belts we want 🤣

[@shaneomac5074]

What? Serpentine belts handle the pressure of an engine, I guarantee you’re not gonna hurt one unless you really try to

[@Tonycutshair]

Doesn't cardi B have enough money to just pay someone to fix her car tho??

[@rjaqueline2378]

How to get the fan clutch off

[@Akx2515]

Yea this is great & all but my car doesn’t have that much room to maneuver a screw driver, barely even a small socket between the pulley & the wheel well/overflow. There’s no way this will work on my Camry. Sad day.

[@ronniewilliams8799]

Black bird singing in the dead of the night reggae song

[@austinsmith2087]

Do not do this. Harbor Freight has the Serpentine Belt Tool for $18. Don't risk damaging your vehicle more. Let's eradicate ignorance . if you took your vehicle to a mechanic ,and he/she said he gonna scoop it up. You would probably wanna take it somewhere else. Take it to someone who can actually name the parts. Not some random KZbinr who can't speak proper English and has damaged serpentine belt pulleys from scoopin it up

[@martinpicazo9260]

no tools?

[@jaredconstable1930]

Best part of video 3.15

[@maniacalmonster2293]

My o my sure would be lovely to have that much room to work with. Holy hell. I have not even finger width room to work with. You can fit a damn bathtub in all that space.

[@SamSung-et9ql]

I looove her accent😚😚😚

[@lioncaptdanieltang2509]

Changed the idler pulley. Tensioner pulley was okay.

[@josephcantrell]

Woman click baited me with using no special tools yet the whole time she is using tools ..smh

[@bigbosssauce7]

Just use the tensioner? Everyone on the planet has a socket wrench

[@westvalleyliving7632]

The idler pulley is chipped and the water pump is fucked, do shit the right way

[@njoy51]

scopitup .. way to the G-spot

[@NATAhomez]

Holy shit water pump is screwed idler pully is cracked no wonder the belt snapped omg

[@scottgin]

Isee,that's how you gonna stuck in the traffic.

[@absoluteunltd2446]

Probably should be Listed as an EMERGENCY FIX when you absolutely have to do it that way due to not having the right tools to do it properly.

[@howardharris5238]

nO tOoLS, No ToOlS.

[@flyer9544]

Yeah... That's a tutorial in how to fuck it up

[@saradeyo9434]

I think they used a tore up car for demonstration purposes maybe?

[@rogerjaywinters773]

Exactly how Mercedes intended

[@zugnonid]

Roger Winters 3:03 says it all lol. I work on euro cars all the time and this makes me cringe.

[@rogerjaywinters773]

Douglas Zugnoni we'd be friends in real life.

[@carlmichaelqqchildress5681]

Roger Winters replace a power steering pump on a Windstar 98

[@carlmichaelqqchildress5681]

how to replace a power steering pump on a 98 Windstar Ford

[@carlmichaelqqchildress5681]

replace power steering pump on a Windstar Ford 98

[@azscib]

hey..... don't scoop..... you got a bad pulley bell and you are stressing the BELT. did not enjoy the video.... really bad advice.... are you too checp to buy a $15 tool to install properly??

[@austinsmith2087]

They had a lot more damage then just the belt. Several pulleys looked loose and chipped probably due to scooping it up LOL

[@cassieharris5195]

Omggggggggaaaaaa shut up for a sec

[@omarismith3655]

Pretty easy job on these engines which are rear wheel drive / 4WD. Because the pulley side is facing you with lots of working room. I’ve done this job on a few GM front wheel drive cars, with the pulley assembly to the left side of the engine, with about 3 cm working room🥵. Extremely difficult to do by yourself, as you can’t see shit, nor can you get your hands fully in there. A lot of torn knuckles and swearing got it done lol

[@leeenglish6176]

Not all videos are good for some people.

[@luhskippy9161]

Lemme try Hollup

[@malgee8469]

Here's the trick

[@ericgerrard9680]

U need a another pulley broke at bottom

[@grosswerks2057]

SERIOUSLY! THIS IS EXACTLY HOW NOT! TO DO THIS ! WTF?

[@enginkara2902]

No idea what she is doing!!!

[@godthesonhasilluminatedme]

Good job...will try that way

[@Jayytype21]

Broken water pump

[@latoshastanfield5523]

Thank you

[@JRealShawtyVevo]

You didn't even start the car up how we even know it work

[@davidyoung8521]

Slow down lady. You interrupt the flow by injecting a completely irrelevant tidbit. Stick to the topic.

[@randomdudeontheinternet9926]

what the hell are you doing? Your waterpump is broken, your pully is broken, you did not prepare yourself for the video and youre way too damn nervous. I think I found out why people claim german cars are unreliable. You guys just throw parts at a problem hoping it goes away but fail to notice the real problem that caused a part to break.

[@muhammedk9648]

Thanks

[@Subjohny]

Ain't your mama told ya...

[@christiansantos6503]

This video gave me anxiety.

[@Dave-qy1fn]

Lol lol lol.. oh yes I've enjoyed the video alright.

[@monanddom5933]

Thank you!

[@williamsanders8531]

What in the hell did I just watch

[@bossman6290]

My brain hurts

[@harlangarza3209]

Scoop it up

[@BillSikes.]

You said no tools

[@emmanuelgrumbach5742]

No tools .. Uses a screw driver and the spaner..

[@alfredough]

Old stretched torn to shit belt torn to shit Mercedes tensioner 18 years old. Try this with a new belt and new tensioner. Good luck

[@luv2jive]

oh help me lord jezus ! Where do these peeps come from??!!

[@aamirkhan007008009]

foxtrot uniform

[@tankgirl9324]

🤡