Serpentine Belt Renewal

Changing the serpentine belt on a 2001 to 2008 Peugeot 307 1.4 petrol engine. Thanks for watching. If you found this video helpful, maybe you could consider supporting my channel by using the ‘Super Thanks’ button below the video. Your support would be really appreciated, thank you !. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Serpentine Belt ~ amzn.to/3PE4CcI
🚗 Ring Spanner Set ~ amzn.to/3S90gfx
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer:
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@screwsnutsandbolts]

Thanks for watching ! Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons. Your support will help me to continue and improve my videos 👍

[@No-Gumph]

Excellent camera angle. Thank you for the tutorial.

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@luyandanorman755]

The mechanics are taking us for a ride. Charging us a lot for simple things like these 😮

[@rapinncapin123]

SOMETIMES!

[@marcio2632-g5m]

Why not pay your mechanic and only your doctor?Your life is at stake too. The problem is they get paid by the hour no minutes.

[@andyvalentine9791]

They don't charge you for the simple work. They charge you for the years of learning, and experience they have, that makes the work simple. But hey, if you think it's easy, do it yourself, and don't pay the mechanics.

[@pokehunteroficial6057]

Lmao, fucking bastards wanted 200€ to replace mine. I just order it online for 11€ and I'm doing it myself.

[@neilt7145]

Did this today on my Wife's 207 1.4 petrol. Easy job and the biggest PITA was the removal and fitting of the arch liner.

[@screwsnutsandbolts]

Yeah that's the most tedious part !

[@biggril2256]

تقطعة كر ى لانطرناتون واش مكدمارش 305بسجو

[@rcsibiu]

Thank you so much... I got stranded on the highway and I had to DIY this job by myself. I never worked as a mechanic lol but I just like to tinker with tools. And I barely arrived at a repair shop and the guys said they have no time to help me. I decided to remove the old belt (which was pulverized) and I asked the guys to at least order a new one for me and I will install it. Today the new belt will arrive and I need to install it. Your video looks simple enough and I hope I will be able to install it properly. Thank you soooooo much!!!!

[@screwsnutsandbolts]

You're very welcome. Good luck 👍

[@rcsibiu]

@@screwsnutsandbolts well unfortunately my Peuget Boxer has a totally different system and also has got TWO belts, a big one and a smaller one. Unfortunately the shop which I ordered from gave me only the small belt between AC and power steering so now I have to wait for a mechanic to bring me the big belt and install it himself (because is a more difficult process). But thanks anyways for the video, I was hoping it will be so simple :(

[@davidgentry5044]

Box end wrench. Not a “spanner “. And you can change direction on this belt.

[@terrornaut594]

I have Citroen C4 and this video was the only video that I could find that could help me. Much appreciated!

[@screwsnutsandbolts]

You're welcome !

[@hoffmanbadenhorst9220]

Thanks So much Screwsnutsandbolts for this amazng Video ... I liked it to see how you changed the Fan Belt of the Toyota Etios 2013 Model like ours ... I appreciate this great Video and your support in helping others to learn how to fix these fan belt 💪🤠💪

[@khetaram1829]

Thanks acche se clear kiyaa vediooo. Bro. Kuch youtuber fatafat. Samjaaa detee he.

[@screwsnutsandbolts]

Thank you ! :)

[@anthonyshifflette1570]

Thanks for sharing,you made it look easy.I will try to replace my belt tomorrow.

[@screwsnutsandbolts]

Good luck 👍

[@u3962521]

Thanks great vid? Best one on replacing serpentine belt

[@screwsnutsandbolts]

Thanks for watching !

[@game4alaughman]

Thanks for great video. I have problems tho, after replacing tensioner & belt on 2015 Octavia 2.0 Tdi the tensioner is dancing about.

[@screwsnutsandbolts]

It the new belt definitely the same length as the original ?

[@bmziwencebabooi2680]

U have jst saved me R200 which the machenic say he will charge me to replace my belt yhooo so simple. Jst change it now using 16 spanner. Thank u once again

[@screwsnutsandbolts]

You're welcome !

[@pedrogomesmbacolelopedro3306]

preciso a referência da correia

[@screwsnutsandbolts]

On this car it's 6PK1053

[@mohamedsaeed3686]

Good work 🎉

[@screwsnutsandbolts]

Thanks 😁

[@markwilliams2830]

Very good info for the procedure.Thank you for sharing.M

[@screwsnutsandbolts]

Thanks again :)

[@ozski2jz]

What tool did u use the loosen up the tensioner??

[@michaelcowenpt]

Great content 🎉🎉 Ty for the help

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@unknownbattlegroundpubg6787]

Thanks for sharing ☺️

[@screwsnutsandbolts]

You're welcome, thanks for watching 👍

[@isaacmartin3DArtist]

Wow great video. You make it to seem easy. ☺️ I will check. (There is a little noise but in my case it seems a bearing/roller. Is this the main belt or te auxiliary? Thanks for your videos, I've purchased a 307cc from 2005 and I want to check it all. 🙏🏻🙏🏻🙏🏻

[@screwsnutsandbolts]

Thanks, this is the auxiliary belt

[@isaacmartin3DArtist]

@@screwsnutsandbolts Thanks to you. I've just discovered your videos and are clear, polite and very helpful. Thank you very much!

[@screwsnutsandbolts]

@@isaacmartin3DArtist Thanks for watching 👍

[@Parmkat]

Great video 👌🏽

[@screwsnutsandbolts]

Thanks ! :)

[@StealthDaz]

Any advice on how to get a stubborn tensioner bolt off?

[@sudhir1996]

What happens if we use a Stretch belt in the place of a normal serpentine belt?? Like installing a stretch belt with tensioner.

[@screwsnutsandbolts]

I don't know to be honest, I only stick with the recommended belts for each vehicle.

[@bechingthai6837]

2016 model duster. Also will be same right to do like that? Cause I really need to know 👏

[@screwsnutsandbolts]

I don't know, I haven't seen a duster belt. Sorry

[@rezkirezki9774]

Bonne journée

[@screwsnutsandbolts]

Thank you !

[@cryptoMississippi]

What size is this belt? Im trying to put one on but cannot find the belt

[@screwsnutsandbolts]

The belt size is 6PK1053 so this one is 1053mm

[@cryptoMississippi]

@@screwsnutsandbolts ok the gave me 1022 and 1085

[@screwsnutsandbolts]

@@cryptoMississippi Is your car the same model as this with air conditioning ?

[@cryptoMississippi]

@@screwsnutsandbolts its a 2000 3.0vtec

[@screwsnutsandbolts]

@@cryptoMississippi That could be a different size belt than this one. I'm not really sure

[@mohamadrezakhajehgeer2578]

It was as very nice 🎉🎉🎉🎉

[@screwsnutsandbolts]

Thanks !

[@hayatinidoya-doyayasa947]

Fantastic. Thanks for your video.

[@screwsnutsandbolts]

You're welcome !

[@unknownbattlegroundpubg6787]

Thanks 👍 bro ☺️

[@screwsnutsandbolts]

No problem 👍

[@sougaming1423]

Thanks you sir 🙏🥰😘

[@screwsnutsandbolts]

You're welcome !

[@bablesh9252]

Thanku

[@screwsnutsandbolts]

You're welcome :)

[@SIJUthevatheril]

Excellent 👍

[@screwsnutsandbolts]

Thank you !

[@DonnieDaDon-w9i]

What vehicle is this for

[@screwsnutsandbolts]

It's in the video description :)

[@mukeshkumarmakenik2503]

Very nice

[@screwsnutsandbolts]

Thanks !

[@ghulabkhan5231]

Okay good morning

[@rajkumarsharma2865]

Very good very good thank you sir

[@screwsnutsandbolts]

Thank you very much ! :)

[@fanabafana9400]

This for NISSAN hardbody 2.7D please

[@rodrigocomia1171]

Thank you

[@screwsnutsandbolts]

You're welcome !

[@mahousekey]

Well mine flew off so don't know which direction to put my new one

[@screwsnutsandbolts]

There should be a direction marking on the new belt

[@mannycastaneda7242]

What tool is that?

[@screwsnutsandbolts]

It's an offset ring spanner. There's a link to a set in the video desciption

[@ashpakmangalwede3642]

Sir isko dalwaneme kitna kharch lagega

[@screwsnutsandbolts]

The belt costs about 15 dollars

[@missionhindurashtra02]

300rs ki mil jaati h belt

[@bablesh9252]

240

[@bablesh9252]

Aap khud dal ijiye

[@bangtanboysfansujitcomrade3674]

Thank you very nice .

[@screwsnutsandbolts]

Thanks for watching !

[@RaesAhmad-g8m]

Bhai log Hyundai maseen poclain me 230 me kon sa belt lagega

[@munshadali5239]

Sar ji hamari alternator wali belt bahut jaldi to jaati Hai par Sahi change kare pyar tut gai

[@rupensaha1282]

5 years purana ashok leyland dost ls main konsa belt size lagta hain

[@BabulDas-fx5ej]

Bhai hm loader d model ka part nomber kitna he please........ Jan kari dijiye na🙏🙏🙏🙏

[@CheikhomarCamara-gc8rl]

Quel est la pointure du croi

[@vallenatos26]

What car model is this

[@screwsnutsandbolts]

It's 2004 Peugeot 307 with the 1.4 petrol engine

[@vallenatos26]

@@screwsnutsandbolts thanks

[@screwsnutsandbolts]

@@vallenatos26 You're welcome

[@lintofrancis8525]

Please do a short video to replace serpentine belt of Chevrolet Beat diesel

[@screwsnutsandbolts]

Don't have access to one, sorry

[@Salmanulfaris-bt5bl]

Which car is this

[@screwsnutsandbolts]

It's in the video description. It's a 2004 Peugeot 307 1.4 petrol engine

[@وليدالطائي-ل3ز]

كيف اغير ضاغطه مال نيسان فيرسا 2008

[@screwsnutsandbolts]

This might help: kzbin.info/www/bejne/epbNZJtsjctnn9k

[@gerilynnelizabethdent-steb9380]

Show a diagram of the serpentine belt 42thousandfourbuickregalthealternatorbelt

[@fayazuddinhaji3032]

Thanks bro

[@screwsnutsandbolts]

You're welcome

[@juanmolina5001]

Buen trabajo 👍

[@screwsnutsandbolts]

Thank you !

[@PhethileMdlalose]

Do the one of the exare two litter for me with six pullres not for

[@purchaseccet662]

nice

[@vajidkallada5695]

First commenter 🙋‍♂️🙋‍♂️🙋‍♂️

[@thandripremaministries3399]

Awesome

[@screwsnutsandbolts]

Thanks !

[@vishnusuryvanshi2155]

Esme to 6pk 2260 belt lagti h n

[@screwsnutsandbolts]

This is a 6PK 1053 belt

[@missionhindurashtra02]

Indain linea petrol m 5pk 1155 lgti h

[@venkateshavenki6774]

Tq so much sir

[@screwsnutsandbolts]

You're welcome !

[@kks4640]

Bilt size sir

[@screwsnutsandbolts]

GATES 6PK1053

[@darrenfrith3958]

Where’s the power steering pump on your car. I have an extra pulley for that.

[@screwsnutsandbolts]

This car has an electric/hydraulic pump located on the opposite side of the engine

[@Sushanta7318]

Fen belt ka no kya hai

[@shivanandackshivanandack9080]

Super

[@screwsnutsandbolts]

Thanks !

[@RanimiliRanimili-jy5fl]

Panvel ka number kitna

[@AjayRaj-or7fs]

Belt number Kon sa hai

[@screwsnutsandbolts]

It's 6PK1053

[@queenmodel1439]

Belt size number bro

[@screwsnutsandbolts]

6PK1053

[@gurinderpanjeta6933]

Good

[@screwsnutsandbolts]

Thanks !

[@markolsen218]

👍🙏

[@screwsnutsandbolts]

Thanks !

[@theyengbangladisharmy1079]

Nissan style well setting

[@margshea1292]

2012dodge journey

[@Rapas4U]

👍😉

[@screwsnutsandbolts]

Thanks ! :)

[@vitthalgore2519]

Hi

[@SRMusic-y4q]

I NEED 7PK 600 BELT

[@delmadaldal8523]

👌👌👌👍️👍️👍️👍️👍️

[@screwsnutsandbolts]

Thanks !

[@nordicpride9708]

They make these things called serpentine belt service kits. Box wrench ain’t it buddy

[@duck4767]

It worked did it not? Not worth to buy it if you already have a tool to do it

[@nordicpride9708]

@@duck4767 There’s a proper way to do things and then there is the hillbilly way. You aren’t a technician so you will never get it…

[@PhethileMdlalose]

I have six pullors

[@surjachaudari5849]

Fan dhak kasneki tarika

[@dhanrajgattugattu1789]

Arebhai mum apne chini rakkahi kay bolthe hove koleth Bouth achalagtha bekarme time west karho

[@shaikhshamshuddin3206]

🌴🌴😩😩

[@santoshd.3487]

भाई आपका नंबर दो ना

[@SantoshSah-gv2ct]

Very buityful

[@screwsnutsandbolts]

Thank you !

[@ozski2jz]

What tool did u use the loosen up the tensioner??

[@screwsnutsandbolts]

It's an offset ring spanner