Рет қаралды 7,647
Start by removing the two battery covers located at the bottom of the front of the machine using a Phillips screwdriver to remove the 6 screws from the covers
Using tweezers detach the two wires located at the corners of the battery
Make sure they do not touch each other, as this could cause a short circuit
Take off the two screws that fasten the battery to the body of the machine and then remove the battery
Prepare the new battery, make sure it is 6 Volts
Put the new battery in its place and tighten the two screws back with the Phillips screwdriver
Then, connect the two cables back to the battery, remember that the red cable goes on the left side of the machine and the black cable goes on the right
Put the battery covers back in place and tighten them with the Phillips screwdriver
#GetFit
#Cardio
#Cycling
#FitFam
#FitLife
#Fitness
#FitnessMotivation
#FitnessAddict
#GetStrong
#LiftHeavy
#GirlsWhoLift
#GymLife
#GymTime
#NoPainNoGain
#PersonalTrainer
#Sweat
#Weights
#WeightLifting
#Workout
#TransformationTuesday