Looks really good to me. Getting ready to do the same thing to my 95 ranger.
@billmyers85727 жыл бұрын
excellent video, gave me some motivation to replace the floor instead of hunting down a used bed
@johnmorneault78887 жыл бұрын
Bill Myers ya definitely cheaper especially if your bedsides are still in good shape. It's not a bad job if your not afraid to get your hands dirty. Let me know if you have any questions!
@RedWhiteAndBlueVideo6 жыл бұрын
You can get Spot weld cutters for $5 at Harbor Freight the saw teeth can be unthreaded and flipped. I use cutting oil and never dulled one yet.
@aux1z115 жыл бұрын
My cross braces was rusty but the bed floor was ok, I air scaled what rust I could get off and put some rust converter and rust coat paint and built some new ones right by the old ones with angle iron and painted it all up and every fall it will get the whole thing drenched in fluid film.
@badwolfblueberrysmokeadven1636 жыл бұрын
great video, thats the route I'm going just ordered from Ford the bed pan. My 2008 f250 6.4 crew cab short bed cross members were in bad shape. So i got the dorman w/ the cab cross member...we took off the bed and started the remove the cross members and the mounting holes came apart. rest of the box is fine no cancer. Mind you its a two tone DX AND CX. so we thought about a new box...In New England ...hard to come by...junk yard had none and offered me a $4,400 southern bed. Me being from Tx I could get em cheap even from a junk yard ..nooooo rust...I'd still have to pay at least 2k to get it sprayed with 2 tone. Saw your video i was sold. KEEP UP THE GREAT VIDEOS TY
@johnmorneault78886 жыл бұрын
Awesome! Glad the video helped! Ya I'm from CT so I know all about the local rust issues in New England! Lol. Definitely worth spending a bit extra to get the floor to. When I did this one I couldn't even find the Dorman ones.
@badwolfblueberrysmokeadven1636 жыл бұрын
HELL YEAH I USE TO LIVE IN NEW CANNAN...I HAVE TO DO SOME PATCHES where the THE CAB CROSS members went but good to go ....only thing im having to deal with is weather... its outside. and im a cop and emt so tues and weekends off i miss my baby ...and its gonna rain. i got a 2 car garage but my atv and harley is in there....i should of listen to how long the project was....hella spot welds...im gonna get more bits the hell if i weld inside w/o vent..from Wall ford 900 and he throw in the cab member....its a great two tone bed ...couldnt let it die
@badwolfblueberrysmokeadven1636 жыл бұрын
The rear crossmember where did u drill it to break break it
@johnmorneault78886 жыл бұрын
scott addison just look it over real good. That was 3 years ago lol. I don't remember where they all were. I think there's a few in the center area
@brucewalters8974 Жыл бұрын
Hi John... Good Video... Could you please tell me where you got the bed floor..?
@tcmits3699 Жыл бұрын
How did bed hold up after 7yrs? Never had luck with spray on rustproofing
@MIRUSTICS Жыл бұрын
I think the F350 I just bought has a bed that's not worth rebuilding after watching your vid. the only reason to save mine would be the exterior bed sides are already painted nice, but the entire bottom and even front brace is toast. seeing the floor is $550 alone it might be less work and aggravation to pick up a non rusted bed for $2k and just lay paint down to match. it's a shame more people don't fix their beds up before they are too far gone for repair.
@MrElvin1975 Жыл бұрын
Great job.
@jimmyvaught6 жыл бұрын
Dude, thank you!! I've been searching for ages for a rust free bed. Heading to the dealership now to order a new bed pan.
@johnmorneault78886 жыл бұрын
Haha no problem dude thanks for watching. Subscribe! Let me know if you have any questions. You could also glue the seems instead of welding them. Much easier.
@johnmorneault78886 жыл бұрын
Ya if your bed sides are good it seams like a waste to replace the hole thing
@Kp2Bombero5 жыл бұрын
Floor Pan - Ford (BC3Z-9911215-A)
@2lotsill3 жыл бұрын
Short bed part number BC3Z9911215B
@markvandendyke3 жыл бұрын
@@johnmorneault7888 What kind of glue would I use to do that? Strong enough?
@ctooth107 жыл бұрын
Do you have a Ford part number for the replacement bed?
@jmvoltrino3 жыл бұрын
Would appreciate an answer on this! $500 from ford themselves sounds way cheap.
@Machine49774 жыл бұрын
Nice work.
@joelefevre60636 ай бұрын
Is that from USA ford dealer or Canadian side
@Shanesknowledge4 жыл бұрын
Me and my dad are also doing this but his truck is a short bed
@fordnut49144 жыл бұрын
Them spot weld cutters suck they go all over the place
@eddylee587 Жыл бұрын
Thanks for the detailed R/R. Great video! Did you pick up the bed floor from the dealer? Did the box it came in fit inside the bed of your truck? Thx
@undergroundshopbarstoolbui21542 жыл бұрын
We’ll I called ford parts an as of today is 12/292021 they are 2,400 buck so replacing rails lol
@dalekleinschrodt28832 жыл бұрын
Did you keep track of how many hours it took from start to finish? I'm looking for a body shop who could do this for me on my 2011 F250 short box. I haven't priced out the bed floor from Ford yet but an after market place sells it for $590 with the 3 cross members also. Thanks in advance.
@badwolfblueberrysmokeadven1636 жыл бұрын
THANK YOU SOOOOOOO MUCH FOR POSTING
@johnmorneault78886 жыл бұрын
No prob dude! Glad it helped! I've got more good stuff coming so subscribe!
@iwerkalone5 жыл бұрын
great video but cannot find the replacement bed part, been looking online for over an hour no luck, only thing that shows up are the cross members
@johnmorneault78885 жыл бұрын
You wont find it. Its a dealer only part. Call your local ford dealer. I paid around $550 for it.
@Kp2Bombero5 жыл бұрын
Floor Pan - Ford (BC3Z-9911215-A)
@joshjenks15642 жыл бұрын
How long did it take to replace
@jjrock56 жыл бұрын
Fellow CT resident I see. Very cool. I’m in the Hartford area. Rust sucks...
@johnmorneault78886 жыл бұрын
jjrock5 haha yup. I'm up in Stafford Springs
@coachLou125 жыл бұрын
What year is your truck?
@Shanesknowledge4 жыл бұрын
Me too Connecticut sucks for trucks
@chefcollins18 жыл бұрын
Great job. Where did you get the new bed floor from -- auto parts store, dealer, etc.?
@johnmorneault78888 жыл бұрын
Sorry just saw this lol. Local dealer. Was around $500.
@MrSexyhellokitty4 жыл бұрын
Did the new bed floor come with the cross supports already welded
@johnmorneault78884 жыл бұрын
Yes
@Ogrodii6 жыл бұрын
Great video much appreciated
@simaneriyamizrachi12123 жыл бұрын
hey from which states you are.?
@robertmadich35627 жыл бұрын
WHAT TYPE OF WELD ARE YOU USING ?
@johnmorneault78886 жыл бұрын
Robert Madich using a mig. Plug welding.
@LightGesture6 жыл бұрын
About how long from detachment to finished coating? Weekend project hitting it hard or no? Thanks
@johnmorneault78886 жыл бұрын
LightGesture took about a week. Its over 200 spot welds. Take your time do it right. Dont rush. You could always drive the truck with out the bed. Just tape the tail lights to the bumper.
@bigwhane86035 жыл бұрын
Boi that ain’t no rust
@MrMarcello5510004 жыл бұрын
What is the ford part number for the bed floor?
@johnmorneault78884 жыл бұрын
Dont know. Call your local dealer.
@blakeneuenfeldt69805 жыл бұрын
What year truck is this?
@johnmorneault78885 жыл бұрын
05. But 99 to 07 are the same.
@blakeneuenfeldt69805 жыл бұрын
@@johnmorneault7888 you imagine a person could do this to a 85,
@johnmorneault78885 жыл бұрын
If you can find the parts. Same basic idea.
@kennyguardado77954 жыл бұрын
Where did you get the floor pan for $500
@johnmorneault78884 жыл бұрын
That was from a local dealer. But that was several years ago. And they gave me a discount. I Don't know what the price is now
@MrCOUNTRYCANNON7 жыл бұрын
What is the Local Dealer you used? I am looking for one.
@johnmorneault78887 жыл бұрын
Carey Blalock Columbia ford. In CT
@scottshellhouse87878 жыл бұрын
Did you get it from a ford dealer or online?
@johnmorneault78888 жыл бұрын
Local dealer. It was about $500
@yatesst12194 жыл бұрын
Did come with the cross members
@radamesarochojr.13077 жыл бұрын
what would it cost for a job like this? I have a 2008 Tundra.
@johnmorneault78887 жыл бұрын
Radames Arocho Jr. depends where you have it fixed. My guess is around $2500 by a shop. Or if u can get someone to do it as a side job maybe $1500-$2000.
@radamesarochojr.13077 жыл бұрын
Thank You! very much for replying. I really appreciated it.
@SaltySeed7 жыл бұрын
Radames Arocho Jr. cheaper to get a new box, you can get a new rust free box for around 1k
@johnmorneault78887 жыл бұрын
Not necessarily. Up here in Ct a new take off bed is up around 3k.
@dorkhole85646 жыл бұрын
How did you remove and flip the bed over? What kind of welder did you use? -Thanks
@sstndrum46 жыл бұрын
Do you have a part number for this?
@johnmorneault78886 жыл бұрын
Steven Garcia no I don't. Just call your local ford dealer
@Smodlee5 жыл бұрын
Cheaper to go to the junk yard and buy a complete replacement bed?
@johnmorneault78885 жыл бұрын
Hard to find one up here in the northeast thats not rotted!
@Smodlee5 жыл бұрын
Oh I know tell me about it I live in New England and I’m searching for one the closest one I found that’s the exact same thing is in Massachusetts 3 hrs from me. I wonder how much would it cost to have a body shop repair my rust holes in my bed floor?
@johnmorneault78885 жыл бұрын
Are the bed sides good? Or are they rotted? Where u located. Im in Stafford CT.
@Smodlee5 жыл бұрын
Ya the sides are mint just the area that’s about 2 ft up from the tailgate is where it’s tender with holes.I’m from Maine.
@johnmorneault78885 жыл бұрын
Where in maine are you? Ive got family in Bangor and Fort Kent.
@jayd5string14 жыл бұрын
How long did this project take you?
@johnmorneault78884 жыл бұрын
About a week.
@Jigsaw_knows5 жыл бұрын
Nice guy nice work but ford rust bucket.
@littleredridinghood56223 жыл бұрын
I wouldn't put that rubberized undercoating on anything ...
@Allemay3 жыл бұрын
Piece of crap Ford trucks. My 2011 is rusted bad enough you could fall through it. Unforgivable.