Replacing a leaking fan clutch

[@died4us590]

At least I'm not the only one who swears so bad trying to get past one lousy bolt, that takes all kinds of tactics to get the darn thing off lol. I would not like to see myself act like a lunatic on film, because I usually end up throwing something if it's that much of a pain in the arse. I like any video you post, because the commentary is so good, so thanks Warren, for another great video.

[@dondiego2262]

Few can swear like a mechanic , one of those though is a sailor. You combine the best and worst of both of those. I think it is a riot. Knowing I am not alone in the cussing of engineers makes me feel better about myself.

[@michaelmcdonald6727]

I was cussing today also Warren, when I was working on my lawn mower and went to sit on my roller stool and it wasn’t there! I didn’t really hurt but a 65 year old guy should be a bit more careful huh!! Thanks much for the entertainment. I wish KZbin would let you put out a blooper video, I’ll bet it would be hilarious! Thanks for sharing your videos.

[@mfc4591]

Once again, those engineers need to spend some time in the field with a wrench in their hands. Good to see the process, I can imagine its still a nice truck if you only have to drive it !

[@sdeery]

MFC, You ever met an engineer who could work on much of anything ?

[@daspicsman]

If I ran the engine company I’d make the engineering staff take a fully assembled truck apart before we were done with the design.

[@richardhoneywell7411]

Great video Warren really enjoy watching you work on trucks. Another couple of happy customers stay safe.

[@johnbell6956]

Great video’s Warren. After wrenching on other peoples crap for 45 years, my first thought now is, how bad am I going to get hurt and will I be visiting the emergency room. I then price the job accordingly.

[@brianrutherford3681]

Great to hear the 8.3 is running like it should.that looked like not to bad a job with the fan clutch

[@cbforme]

I glade to see you actually get mad and I am not the only one who gets made when working on something.

[@mongomay1]

You can take the sailor away from the sea, but you cannot take the sea out of the sailor. Thanks for sharing Warren.

[@irenesilvers7096]

Another good job done, glad to hear about the hay squeeze:)

[@colinmyers8841]

hi Warren , Greetings from sunny Queensland Australia , good vid this one , good on ya mate

[@Prariedog]

Another great job well done . Thanks for sharing Warren Take care safe travels

[@lukewatson8309]

You can put a 6in extension in the front Part of the tensioner toward the fan and it works alot better, just my 2 cents worth, always enjoy your videos, keep up the good work

[@tracydiller9378]

Great video Warren as always.I figure on some jobs i swear a least 10 swear words and think of 10 new ones,just saying.Keep up the great work until next be safe.

[@alvinsterk2918]

I hated changing belts on my 379 with a 3406E always had to take the fan blade off always ended up with bloody knuckles from the radiator even with loosening the radiator braces 🤔🤔😁😁

[@nickchannel5364]

Great landscape view.

[@roadsideservice2406]

Induction heaters, work great for heating. Found they don’t last long

[@gutsngorrrr]

One day a designer engineer will think about talking to a mechanic and actually asking them what would make their life a little easier... one day

[@amunderdog]

Somebody said, repair was way down on the engineers priority list. I say they should have several years of experience as mechanic, as part of qualification.

[@MrMopar413]

Don’t hold your breath on that one🤪🤪🤪👍

[@4X4F250Diesel]

Maxforce 13 make most other trucks seem easy to work on, I believe they put everything in the way and behind a bracket just to be aggravating

[@larryburns4605]

Nice view of mountain in background

[@elroyelblander6277]

👍👍..thank u for the knowledge and time feller...see on the next one

[@calumanderson5617]

Thank you for the video Warren, as always I hit the like button for yah.👍

[@SuperSecretSquirell]

If the seals are too blown out to let it release, you can back off (or remove) the plates on the back side of the clutch. Those hold the clutch material in place and will release once they're loose/off.

[@douglasmayherjr.5733]

Seems like the older I get, the more my torque output is limited by what I had for lunch and how long ago it was. Too much torque could lead to a change of clothes.

[@dclfarms6204]

I almost overtorqued my pants this morning. I know how you feel.

[@douglasmayherjr.5733]

@@dclfarms6204 that’s funny.

[@marcchapman4875]

I have rebuilt a lot of fan clutches in my time and none have been easy to remove

[@vincenthalas7055]

No doubt I am wrong, Warren. But my understanding of locktight was you tightened the bolt slightly first to break it?

[@HUBBABUBBADOOPYDOOP]

Warren- This job would be an excellent application of a smoke machine. Plumb it to the main air tank, turn it on. You'd see every leak, very easily. You can even add dye, use the glasses to see the colored smoke. Could you please at least try one in a real or mocked situation?

[@Johnditit]

We might like those X rated parts. Heck, I watch that show Gold Rush and that guy on there Tony Beets, has about every third word beeped out. That guy cracks me up. Maybe you just need a beep button when it gets real bad. Good video.

[@yowser8780]

What is that double ramp with platform thing behind you ????

[@endtimes2100]

I was gonna ask the same question. Some kind of loading platform for trucks?

[@thomascurran2990]

a playground for the goats maybe

[@craigsmith8217]

Smarter than your average tensioner.

[@DavidGrassSr]

Those starters are a pain in the ass, i use a stright barrel tourch , the one used on old track burning machine are these new CNC bruning machine works great in tight places ? Well done, See Ya, fromTexas

[@nopatience1417]

I see in the video you still have your old service truck did you fix it?

[@dnixon8767]

good video Warren

[@squintin480]

I'm just here for the cuss words🤣🤣 I watch your videos and think it would be cool to be a full time mechanic, then a little while ago I had to remove the starter on my tractor just to get the tank off the power steering pump to replace the o ring and filter and had a 12pt bolt in the back of the starter and both parts I ordered were wrong. Now I don't really want to be a mechanic 🤣

[@harrykeel8557]

If you think Texans talk funny you should come on over to Alabama. You'll need an interpreter.LOL! My wife is a Air Force brat and I we've been together for41 years this June. I still have to translate my own words. Love her though. There's always that one bolt that you can just get the socket on and you can't get enough pressure on or it's seems like they welded it on.

[@geesss8675]

RUMBLE LOVES CUSS WORDS

[@mandy8211]

Lonesome Cowboy Burt. Speakin Atcha.

[@BobTheBreaker9]

Hey Warren is this on your property?? Beautiful wherever it is

[@michaelmcclure8673]

Warren didn't you replace a air tank on that truck a while back? Is that the pups course in the background?

[@westerntruckandtractorrepa1353]

That was a red Western Star.

[@PoliticalGangster]

so with leaking compress air would have the fan engage, spinning even when cooling is not needed?

[@westerntruckandtractorrepa1353]

Yes

[@559043]

I'd like to hear the uncut version ha-ha. mainly so I can feel better about myself when a bolt warps my brain

[@zfs1987]

Shit the bed Fred. Awesome. 😂 Lol

[@TolaTrucking]

I've had a shop mess up the fins on my rad by not putting a piece of cardboard between the rad and the fan for protection while doing this job

[@matthewhansen5008]

If you want to wrestle a couple of belts, do one on a mack/Volvo engine. Fun times.

[@davidwelling9471]

Did you change the belts. You're already that far?

[@polymaticsim]

The special tool you need is sitting on your neck, but the warriors wouldn't know that😂😂

[@prevost8686]

The induction heaters are the cat’s ass for close quarters combat but they are overpriced and delicate. I keep thinking that they are going to go down in price but they are still overpriced.

[@genechronister7085]

Awesome vid!

[@davidholder3207]

Re "tars" on the car" we call 'em tyres as opposed to tires. Dam this American 👍English!!

[@swiftss39]

What ever happened with the tractor rental business ?

[@davidestelter1092]

flavor? new word for the week with out cussing hey! lol DONTHIT YOUR FINGER WITH A BIG HAMMER WARREN...

[@rickjohnson1632]

While working on sh__ at times I find swearing to be very therapeutic and produces a sort of head clearing experience. I’m just sayin

[@wayneoliver3564]

👍👍👍👍👍👍

[@adamgardner4213]

On the Detroit DD series the tensioners have a 1/4 hole in the front and rear tensioners to hold them in the open position if you don't have the pins for them you can use 1/4 extensions or 1/4 bolts Fan belt circuit needs about 4-5 long The serpentine belt is 2 inches long or so On the serpentine circuit prior to removing the belts you can reach the sq drive from the front with a 2 inch extension makes life way easier than monkey fuckin around with 6 inch from the back door just sayin

[@blake9361]

good vid one man gang

[@rickytart1028]

much enjoyed...thanks

[@JACKATTACKED]

👍

[@flynfrd]

WARREN!! How dare you short us out of you swearing at a starter!! Lol. I would give anything for that video. You should have posted it.

[@poppy19571]

Need to watch this video freight-liner cpc is putting people out of business by gentry and son trucking it has some good information in it.

[@GeekBoyMN]

I heard "wars" and "tars" more from a guy from Ohio than I ever did from actual Texans when I lived in Texas for 30 years.

[@PoliticalGangster]

hard to believe those high-horsepower diesel truck fans can draw 25 to 30 hp.

[@ЮрийКлимов-л8й]

Молодец

[@BobTheBreaker9]

13:27😂😂😂 facts!

[@amunderdog]

Fan sure seems slow, to respond to commands.

[@dalewesley1662]

Section 270 253 not leaking

[@gordondickson6901]

I may have asked this before but couldn't see an answer You American's use the imperial system of measurement including SAE but often I see Warren referring to spanners in millimeters as well An understanding of this would be appreciated thanks Can be another viewer as Warren is very busy Also you still have large litrerage engines travel huge distances at a time fuel is getting ridiculous I have a 3 litre Toyota diesel turbo which we call the "bullet proof" motor After you have done the head which cracks that is Not everyone tows large loads in the states so why the large engines please New Zealand subscriber

[@EFCasual]

Manufacturers have used all types of hardware over the years and you will find metric and sae on the same truck in the US.

[@garybulwinkle82]

@@EFCasual Whatever's cheapest!!!

[@gordondickson6901]

@@EFCasual Not that it happens much now but for a long time we even had "Whitworth"

[@chuckgulledge2304]

That's ok Warren, you should try being a southern feller having to interpret yankaneese to regular tennessee hillbilly language

[@robertdonaldson6584]

Jack Russell Terrier

[@davidmcknlght2700]

👍

[@Gordonseries385]

👍

[@blacksmoke5009]

👍