roadkill guys actually hate rust and when they want it gone i get the call. this time it was the red duster which needed a new floor pan and it would be my first time doing floors on an A body
Пікірлер: 148
@Thermopylae202411 ай бұрын
Derek... chillest geezer on utube
@marcusa800711 ай бұрын
There is absolutely nothing more labor intensive as major rust repair, love youre channel, every panel replacement video, i learn something new
@jerry23brown11 ай бұрын
Dang you made me feel old when you said I wish I was old enough to have watched day’s of thunder when it was in theaters lol I remember I was 10 years old I can still remember going to the movies and watching .
@lonniem972810 ай бұрын
Same
@BillyJoeJimBob2811 ай бұрын
YeeHaw!! Rockin & Rollin in the Rusty Duster wif brandy new floors. Atta boy Chris! Plus the birds were singin while the tires were Smokin! 😂 😎👍
@blucheer87435 ай бұрын
Great work Chris as usual! Watching your videos inspired me to do the floors in an old bronco. Rather than just patch them up I cut them all out and replaced them. Used same the tool kit, hired a local kid to help and just went at it. Followed what you did down to the spray on welding through copper primer to the epoxy primer snd the raptor paint. I just couldn’t be happier with the result. Roll bars going in next. Can’t say thanks enough Chris! Any body reading this just watch the videos get the proper tools together and take ur time.
@drew776711 ай бұрын
I can watch you do metal work over and over. you have taught us a ton. appreciate it, don’t ever think we are bored of it always learning something from it
@robertmungo542810 ай бұрын
Awesome work on the Roadkill Duster. Love the Charger medal donated to the repair!
@sadiejustin11 ай бұрын
20:15 the wizz wheel sped up is the air guitar solo from the OG "Bill and Ted's Excellent Adventure"! 😂
@juice199911 ай бұрын
I tune in for you Chris and I love Derick (he is 1975) but the real star is Bolt lol Keep up the good work !
@chrisolson96811 ай бұрын
If I had 1.25% of the skill he has, I would be happy. Always impressed! Cool guy.
@STAY-GOLD-VINYL11 ай бұрын
Dude just get out there and give it a go. You got this
@mightymikethebear11 ай бұрын
Skills are developed with a lot of practice. Chris B. has had many years of practice.
@garyballinger737211 ай бұрын
Love your videos. You mopar guys are a special breed.
@Mark-vd8oi11 ай бұрын
ALL YOUR CARS N ROAD KILLS CARS N TRUCKS R ALWAYS KOOL. THANKS FOR ALL THE GREAT CONTENT.
@Cyberdinemechatron11 ай бұрын
Finally some new content, thanks Chris!
@kendrataylor732111 ай бұрын
Absolutely love the show, keep going bro . I gave up trying to find the car I've always wanted. I've been looking hard for a G- body car for about a year. Not much luck. Keep building em man , All of your shows are awesome.
@g.o.b.255811 ай бұрын
Dang, only a year. You give up way too easily... It took me over 10 to get my Charger, and it will probably take me another 5+ years to get it where I want it to be...
@kendrataylor732111 ай бұрын
Yeah, my dream car . I've got 2 and I've spent 12 or 13 years looking for them and unfortunately I had to realize that it just wasn't going to happen. So I've spent a year now looking for a G-body car , now I found a couple but there were total garbage. So we'll see what happens there. My dream cars which are 2 are a duster or a Nova. I've spent quite a while looking for either one, 12 or 13 years man , it's been nuts. So , now I figured I'd cut my losses and try to get a G-Body car . It's been a year this month looking, I never thought that finding one of them would be this hard .
@RussAndRustАй бұрын
I never even thought to put my phone in the speedo cutout on my Duster! 🤣 Love the vids man, doin some catching up tonight!
@jmuduke9911 ай бұрын
Always impressed with your work, Chris!
@travelingtech325111 ай бұрын
Great to see another metal work / panel replacement video again from Chris
@martind70111 ай бұрын
You are very talented Chris.
@2koolchris29110 ай бұрын
Chris birdsong, master of mopar. Can turn a rusty turd into a respectable machine. I always love the work you do, very good work. Hope to one day do quality work like you.
@sykwookiee11 ай бұрын
To capture a street sign in the wild...1) use your truck 2)back up truck, aligning the hitch with signpost 3) reverse until sign touches the ground 4) remove sign from post 5) haul ass before Johnny law gets your ass 6) you're welcome....
@stevejones664711 ай бұрын
You have the best intro of any car based yt channel by a mile. Love that you beat on your cars
@Greg383BB11 ай бұрын
Chris I had no idea all of the work involved change floors wow! Great job
@philb38611 ай бұрын
Man your neighbours must love you. Nothing like a smoke run to meet and greet the neighbourhood
@wjb11111 ай бұрын
I never miss a new video!
@stewartkarol75711 ай бұрын
Nice repair on the red ruster👍
@mightymikethebear11 ай бұрын
Your videos may inspire others to try to repair classic cars.
@kaimihedemark839411 ай бұрын
It is easy following your videos, you make excellent content and you teach a lot as you work. Great job buddy. Aloha 🤙🏽
@brettemerich323711 ай бұрын
Chris you probably had a time frame to have the floor done. You are a great metal worker and know how to get it done the fastest with quality. I remember that you have done work roadkill before. You took one car and put wheel tubs back in put the rear seat frame back in. Fryburver knows your work. Have good day
@anthonyshelton678611 ай бұрын
fun little watch nice work on making floor pan install look fun and the full on blues Brothers moment
@svenwallmark457111 ай бұрын
like your content.the best.
@dusterowner997811 ай бұрын
man you do great work . Wish you were in in topeka to work on my 71 Duster 👍👍👍👍👍
@mikebrown806511 ай бұрын
At least it didn't fall short of a typical "Roadkill" moment and end up on the side of the road 😂😂😂. Even if it was only out of gas! 😂😂 Great video!! Thanks for sharing 👍 😎🇺🇲🇺🇲🇺🇲🇺🇲
@edvisme11 ай бұрын
Bet those rusted out fronts are from not just the windshield seal but the windshield wiper arm seals.
@tbd-111 ай бұрын
Mopar only made 1 floor pan for A Body cars. They too cut a hole in the floor for the shifter hump and it wasn't their proudest work. Mine was held in more by the seam sealer than by any welds they applied and the cutout was rough as hell.
@perryanderson237611 ай бұрын
Chris your th man when it comes to panels
@egodeathplease11 ай бұрын
Roadkill car. Right on. Means it has a new gearstar 4l80, blueprint engine, QA1 suspension, Mosier axles and pawns like yourself to do the work. So "Fry n burger?" can show up with his timing light n be the hero. Your like a mechanic Hollywood stunt man. 😂
@SesameStreetRacingChannel11 ай бұрын
Yes...Roadkill and many channels are just front men for big corporations who want to "sell the dream" to working class shlubs who CAN'T AFFORD all the whizzy, expensive parts they are being convinced that they need.
@viktorhardindyrvold423411 ай бұрын
Like he says himself: way too nice parts on way to crappy cars ...and I'm here for it! At least RK cars have character!
@scottsmith684611 ай бұрын
Hey Chris thank you for the video and great job 👍
@donpatillo360011 ай бұрын
Hello 😊, en français le titre du film c'est; jour de tonnerre . Bon travail sur la voiture 👍.
@mr_paw_t11 ай бұрын
as always, good job.
@raywagner801611 ай бұрын
Man, where I'm from, those are good floors. BTW, Johnny, AJ & Sue said "Hi".
@metalbeast8311 ай бұрын
I remember going to see Days of Thunder when it came out as a little kid
@daveb501611 ай бұрын
Great work as per usual.
@auteurfiddler870611 ай бұрын
The Road Kill guys had the best video about tuning a Holley carb. It was on a very old Ford pickup truck as I recall. They used a fuel mixture gauge and changed primary jets, secondary jets, accelerator pump cams, squirters, etc. I may be forgetting a few. Secondary springs, maybe. There is a scene where they lurch forward in the truck but forgot the tailgate was open and the jet kit open and had to spend a bit of time digging them out of the dust.
@MikeJBlues11 ай бұрын
Superb job, sweet Duster
@rodypma605111 ай бұрын
Great job Chris, now go let the smoke outta them tires!
@jamesmiller156211 ай бұрын
Chris If you ever come to Washington with your modified I will wrench for free for the weekend
@sprintcarsandguitars95911 ай бұрын
desert driver.
@joebacarella282911 ай бұрын
Chris I can`t believe you pulled out the interior again to paint it red, it`s getting carpet right. I thought poor Derik flew out of the car when you did the burnout, nope camera man, the floor looks great.
@timothyballinger628010 ай бұрын
Well I was old enough to watch Days of Thunder at the drive inn which isn't there anymore! Man I'm old lol!
@jamesdamron206511 ай бұрын
Lol I remember days of thunder,,i was living in Daytona at that time it came out,,& i actually used to mow the grass at the track & i worked at a shell station next to the track & we'd watch the twin 125 races from the roof of the station!!😂😂
@Rockriverboarder10 ай бұрын
Amazing work as always. They really need to get some sort of finish on the roof or that’ll be fill of pinholes soon. Be a shame to wreck that roof skin.
@gilbert63211 ай бұрын
? Why not go in from the passenger side ? Take that pop out window ? Just curious
@ZacLowing2 ай бұрын
I was thinking the same. Then they said remove the steering wheel and I laughed
@Guns_N_Gears11 ай бұрын
Flex seal the new INEXPENSIVE alternative to DynoMat!!!!😅 I kinda had to chuckle, as soon as you said cheapAss, a commercial came on😂
@AmateurHourRestorations11 ай бұрын
Another great video! Keep it up!
@TheUser6611 ай бұрын
damn, its nice to see a job this good!
@cdoublejj10 ай бұрын
what about the harbor freight spot welder with mondo exdendo tongs?
@DaEli0311 ай бұрын
Trying to watch this in class is hard I’ve been yelled at twice already
@DaPenceman11 ай бұрын
Time for a 440 powered Delorean?
@hansblooeyribbon420711 ай бұрын
How do you fix stripped out sheet metal screw holes? Like inside door panel or armrest screws?
@chucktaylor277211 ай бұрын
Grab a MIG and put a weld on it , replacing some metal. May need to drill to size, depending on weld nugget size.
@MrWoodshoes11 ай бұрын
Have you ever tried a Roto Zip for the spot welds ? I sympathize with you having to deal with the weather, you really need a shop to work in !
@mightymikethebear11 ай бұрын
A dry, warm shop would actually make the work easier and may speed up the process. However, it is none of my business how Chris chooses to work.
@chadvetter819011 ай бұрын
Nice, you make it look easy.
@bluescelt531711 ай бұрын
Chris, I thought an A Body with a magnum w/ stock power steering interfered with the battery tray.
@TrashcanGarage11 ай бұрын
Fun to watch. More fun than actually replacing floorboards. BTW - whose weld through primer did you use on this?
@shanewright695811 ай бұрын
Looking good 👍👍
@messylaura11 ай бұрын
those cheap 55amp Chinese plasma cutters are excellent for cutting out the floors,
@NowonBeauty10 ай бұрын
What happened to Black Mamba??? Does anyone know?
@sadiejustin11 ай бұрын
Derek llokin like the Geico caveman in the passenger's seat! 😂
@marklottero534511 ай бұрын
Love a car like that, nice but not too nice to have fun with
@tims72demon11 ай бұрын
Saw something that looked really handy & useful. What is that flat steel bar you use to cut between the sheet metal ? Is that something you made or something you can buy ? I’m redoing my 72 Demon and that looks better than what I’m trying. Good video, & great work. 👍
@jaysho546111 ай бұрын
You should start selling those water bottles as Roadkill Memorabilia. Hell, maybe some weirdo will even use it to clone Freiburger.
@dave365710 ай бұрын
I wonder if people who replace the pans might not remove the steering wheel and front windshield, and put the pan in from the front? 🤷🏻♂️
@marionarthur662911 ай бұрын
The days of thunder ride at Kings Island was pretty awesome
@roycervantes134111 ай бұрын
Yeee Yeee 🙂
@russellregnier581111 ай бұрын
I noticed you didn't use the copper welding primer. Is it not available any more
@junkerup11 ай бұрын
I bought wrong box
@JustMoparJoe10 ай бұрын
Livin the dream
@johngartner671011 ай бұрын
Whenever I see an accelerator arm froze like that it's the check valve is stuck under the nozzles
@ultimatejay11 ай бұрын
Wouldn't it be easier to put the floor in from the passenger side so you don't have the steering wheel in the way?
@valricogarcia11 ай бұрын
With all those water bottles, you could sell genuine Freiburger and Dulcich backwash to Roadkill fanatics on ebay.
@UnfinishedProjectDartSport11 ай бұрын
I like it!! Now paint it blue.
@steveash983111 ай бұрын
I like to use a burr bit in a drill on spot welds. The bit lasts forever. However, it does throw a million tiny steel slivers everywhere. Umm, nevermind.
@motoroney11 ай бұрын
how long does it take to do a job like this?
@danpatterson800911 ай бұрын
General Dee Lorean?
@user-KrackerJack11 ай бұрын
👍🏼
@SuperSportstudio11 ай бұрын
👍 ✌ Nice
@Robrt327 ай бұрын
I thought he gave it back to you? Or is that not the 1? I’m bad with colors but I thought it was that color and about that rusty
@1gatomon11 ай бұрын
LOL Great job.
@anunnakielohim272711 ай бұрын
After seeing you do a frame graft on a charger frame I don't know whether to call you Dr. Dodge or Mr.Moper but you need to get with your neighbors and rename a local street "Burnout Blvd." Keep a '68 Charger on the ready in case I win the lotto!!!
@volvowagon7011 ай бұрын
Jared at the questionable garage had to pop a window out of his duster to do his floors too.
@lennardlennard41411 ай бұрын
👍
@g.o.b.255811 ай бұрын
👍👍
@roywhitman710911 ай бұрын
Like going to sheet metal school! 👍
@monsterkxf11 ай бұрын
I hope you threw all his water bottles and junk back on the floor behind the seats 😂😂
@jdfmfb0311 ай бұрын
Wah Wah Wah
@TheGforcead11 ай бұрын
What Is up my brother and fellow "run what ya brung" guy, one question, does the driver's side rear have all anti-theft lug bolts or are my KZbin eyes deceiving me? Little known fact, in the Original Gravedigger the driver's seat was school bus bench seat!
@wingerfan110 ай бұрын
Too bad you couldn't come to Alaska I know where there's a DeLorean that's been sitting. Parked for over two decades. Very low miles.
@junkerup10 ай бұрын
What….I could do that, e-mail me heyjunkerup@gmail.com
@KennethDevine-hg4cb7 ай бұрын
It's a lot easier to get road signs if you take a battery operated sawzall with you you just cut the post off
@Nichole-440HP11 ай бұрын
Your buddies fried burger and dullchise left you with another clapped out mopar to fix 😂
@edberry7811 ай бұрын
Dammit, Dave! lol
@petecrabtree673411 ай бұрын
🦅🇺🇸💪😎👍
@garytallard232111 ай бұрын
Pro level 10
@TheMotoracer83810 ай бұрын
Because Roadkill...😉😁😆
@robertroberts248411 ай бұрын
Fuel? They don't need fuel with the crew van following all the time 😂😂😂 gotta get your own show for that reason only😂😂😂