Very detailed and does things other mechanics rarely do. Which makes a huge difference. Good job brother man
@rogeliopadrojr4179 Жыл бұрын
Thanks needed
@grumpy14692 жыл бұрын
good job. and you know what you are doing and a good job explaining Thank You
@brycesmith20152 жыл бұрын
Great video. I’ll be replacing my driver side CV axle next week when the part comes in. Your help is going to make the repair easy.
@eduardocarrillo5975 Жыл бұрын
Just a quick question why are you replacing your driver side cv axel? What symptoms did your car have if you wouldn't mind telling me. Thanks!
@brycesmith2015 Жыл бұрын
@@eduardocarrillo5975 I would hear a mechanical popping sound when turning (only occurred some times, but was consistent and noticeable) - the vehicle would also shake at interstate speeds.
@brycesmith2015 Жыл бұрын
@Gavin it was easy but when you go to do the repair, place the car in neutral, chock the wheels so they’re secure and then jack up the car until you can get it on jack stands. I placed my emergency break on and it made it difficult to remove the brake caliper. I also purchased some anti seize paste and smears it on the CV axle splines. Mainly where they insert into the transmission. You’ll also have transmission fluid that will leak out, so have some of that handy to refill the reservoir. It’s also difficult to access the filling hole, so you’ll want a funnel that has a plastic hose attachment (I found an affordable one at Autozone) In all, I spent about 6 hours and $300 to make the repair.
@441252 жыл бұрын
With the car being so new…. Why was the transmission fluid so dark when you pulled the part?
@jeffnajmowicz5634 Жыл бұрын
That's what I was thinking, that tranny is shot or going to be real soon
@danyoinfluence9 ай бұрын
Excellent video, thanks for taking the time bro
@Avation.Experience2 жыл бұрын
I’m looking at parts now but the images I don’t see the ball rolling bearings attached to the bottom of it. Are they sold Separately? Or the image just does not show it
@jahleelpouncil52409 ай бұрын
The cv axle wouldn't come out with pry bars but I made a makeshift slide hammer with a strap tied to the cv axle closest to the transmission and on the other end a cross bar, yanked it hard quite a few times and it popped out.
@thomaschristopherw9 ай бұрын
How do you replace the fluid when it's a sealed transmission system?
@rickythompson18572 жыл бұрын
Always doing a thorough job!
@danyoinfluence9 ай бұрын
Is this a 1.6 L engine, I have a 2.0 turbo and when I look up the CV axle it shows with femal spines on trans side not like this one with male splines on trans side?
@1High420Ай бұрын
Was that transmission fluid?
@brianrobinson4164 Жыл бұрын
If it only makes a noise when you hit the brakes could it be a CV axle as well??
@jvirg2 жыл бұрын
I have a 2008 Malibu. When I look for this part they all say they don't included the abs tone ring. It also says it can fit the driver or passenger side and to transfer inner stub from original axle. I really don't know which one to buy.
@sweetpea7322 ай бұрын
Ugh do i want to attempt this myself? I just want a different car im tired of driving a boat 😅thank you for the video. Its helpful. Where are you located?
@steveowlhollamac80652 жыл бұрын
What is the issue when the AXLE will not go back into the TRANSMISSION on a 2007 CHEVY MALIBU LS...THX
@jms76205 ай бұрын
What year is that
@RickYeezy_2 жыл бұрын
Anybody know the part numbers for the Axels?
@angelbou7578 Жыл бұрын
What is that other part that looks like the CV axle but it has a longer tube around it called??
@Snotcicles Жыл бұрын
CV Intermediate Shaft
@Chiefsohigh Жыл бұрын
Great vid big ups man
@fernandosoto77242 жыл бұрын
Very good explanation
@bjmcacc23042 жыл бұрын
Is re-alignment needed on 2011 Chevy Malibu after changing CV axle shafts?
@441252 жыл бұрын
No
@gregschenk76658 ай бұрын
absolutely YES. He tipped the spindle by removing the adjustment bolts. If you tip it by removing the lower ball joint then you don't have the added expense of an alignment.
@kirbyzknuckle5867 Жыл бұрын
Good job man.
@hjcooper22582 жыл бұрын
Excellent, thanks!
@billyoverton88333 жыл бұрын
U do good work bro it help me a lot
@horacegwaltney56312 жыл бұрын
How much does the labor cost for a job like this
@Ricky_Desch Жыл бұрын
I recently got quoted $540. I bought the part from Chevy for $26. Just gonna do it myself soon.
@roserosenpearl66882 жыл бұрын
Nice job!
@James-sz2hr3 жыл бұрын
bless
@BoostedCruze2 жыл бұрын
Great video. Do you know how to install manifold and throttle body spacers? I have a modified 2019 Chevy Cruze. Look for someone who knows how to work on Cruze. You can check out my car on my channel. Thx