replacing the tie rods on the 656 (sort of a how-to video, but not really)

[@dwaynekoblitz6032]

You sure have lightened up in the last year. You’re like a different person now.

[@kladpapier]

Scary moment with the torch, good reaction from both you and your dad.

[@jasoncoambes8640]

LOL, you have gotten a lot better at making videos in the last year. Started out stiff, scripted, insecure . . . now you're a pro at it! Much more comfortable to watch! Feels like I'm doin chores and working with you as a farmer vs watching an architect on screen for the first time! Bravo! Keep the great content coming! I'm hooked!

[@EdwardRichb52]

You bent over the cotter pin in the castle nut perfectly. So many people do it wrong... Well done!

[@DjBend1]

The double wrench! So simple but genius to increase the leverage. Why did I never think of that.

[@larrymoore6640]

I never worked on a tractor front end but on vehicles when we removed the old tie rod ends we counted each revolution. Installed the new ones the same number of turns which at least put us in the ball park before doing the final front end alignment. Thanks for the video.

[@Will45ACP]

A solid second on the anti-seize. Amazing stuff. When Dad took over the home place, we started using it on pulley shafts, hardware, you name it. Made life much easier.

[@JustaFewAcresFarm]

Yep, I use never-seize on lots of jobs. The only place I've learned not to use it is on anything I have to touch later on. I can never get the darned stuff off my hands!

[@davidrobertson376]

The availability of reasonably priced tractor aftermarket parts really makes keeping these old tractors in reasonable, reliable and safe condition. They don't have to look like new to do a good job. In regards to the estimated time taken to do these repairs I work on this plan. A 10 minute job will take half an hour. An hour job will take half a day. A days job will take half a week. Great video. Dave.

[@charlenewenthold5150]

You amaze me I did not know that heat would make a difference to loosen something you are a great teacher

[@daubber51]

I really appreciate how you do your farm machinery/maitennace/repairs,,,brings back memories of us as kids getting our hands dirty,when we were on a farm helping my cousin during his farmer days,,,(you can take the boy out of the country,,, But you can't take the country out of the boy.) Bob

[@retiredatforty]

Another awesome video. I did the dishes while listening to you talk about tie-rod end replacement. Can’t think of anything better!

[@ellisc.foleyjr9778]

Great video Pete. one thing I noticed here is how Salome you are through out the video. not you're usual smiling jovial self. guess you were getting you're "Video Sea legs" here ha ha. still great tutorial love old tractor repairs. thanks for sharing. ECF

[@BADEB58]

Second video watched and love what I see. French subscriber who love american homesteaders or homeworker or simply "Farmer". I guess Farmer is the best word. Thank you

[@jamesbreault5762]

Great stuff Pete👍👍👍👍

[@tjmcmurtrie5756]

Been there done that... And yes you are absolutely rite. Allways set aside more time than you think it'll take...and allways have a blue-tip wrench (torch) ready to go....great video pete

[@Rifleman1964]

I did front-end work and alignments for 2 years. I found if you measure from grease zerk to grease zerk and keep side to side separate you normally come out with a straight steering wheel and everything close to perfect. Saves a lot of time.

[@monstertruckcarnage2765]

I’ve been watching forever I bought a 656 international tractor it’s not the hydrstic one it’s the outher one the with the high and low gears one on each side we put a bush hog frount end loader on it love it it’s a 6 cylinder diesal 65 horsepower

[@donofman8829]

I had a 2000 Ford Ranger. Just before I retired it at about 9 years old and 250000 Km I had one of the tires rod ends separate while I was driving home.

[@COIcultist]

@@mwilliamshs What a gentleman you are Sir!

[@jamesranger6283]

One tool I found very useful on the farm is a electric impact wrench. When something brakes in the field it is great to haul a generator out and run an impact when wrenches start snapping bolts or conventional tools just wont work. I have even run an impact using a 12V inverter.

[@michael7423]

I’m glad you still have your Dad with you, God bless you both! Thanks for teaching me some new tricks! Is your Dad Pete sr.?

[@countryboy63077]

I’m watching your videos from the beginning being that I’m a new subscriber. I was wondering if this tractor could have been a IH industrial tractor as I saw what looked like a lot of yellow paint under the red paint. I am not a mechanic nor do I claim to be, but I’m really liking these videos on repairs and maintenance. Thank You for sharing these!

[@Benelli-ex7oq]

I really like these kind of video's

[@ottocarr3688]

If you hit both sides of the tapered ball joint receptacle with two hammers simultaneously, the ball joint will fall out without all the pounding on the rest of the steering mechanism. Also, every bolt should be coated with never seize to make disassembly much easier the next time you do that job.

[@FloridaJack]

Good job.

[@dansherrell6803]

I smoke, which is a very bad habit and I hate that I do it, but when I get the MAPP torch out to heat something up I usually light a smoke with it and then keep the heat on my part till I finish the cigarette. Seems to be the right amount of time to heat a stubborn fastener. I also do that when I grill a steak. One cigarette and half a beer (flip halfway) will usually get you a medium rare rib eye. There's less risky ways to time things I'm sure, so I don't recommend that anyone adopt my methods.

[@lwkett]

definitely need a socket set and a breaker bar! the ol' 2 wrench together is a great trick, but a good breaker bar will solve most of these problems

[@JustaFewAcresFarm]

I have these tools. Many times 2 wrenches together are easier to turn off the nut because force is applied in the plane of the nut, rather than at the breaker bar end of the socket.

[@COIcultist]

@@JustaFewAcresFarm *"2 wrenches together are easier to turn off the nut because force is applied in the plane of the nut"* I was just thinking "I've never thought of that" when I had a "Hang on, what about" moment. Please look at 05.45 this illustrates that most combination spanners (combination wrench[?]) have an angle between the plane of the closed end and the body of the spanner so surely the force isn't through the plane of the nut. Although I think I can see what you are alluding to. I had to get an alloy wheel off a car the other month and even using a six sided socket the socket was still riding off the bolt. I have a compressor but no impact wrench so asked a friend to bring over his. He had an impact driver but no proper impact sockets. I'm a bit of a safety Sally, so I told him to get a set and I'd pay for them as thanks for the help. While waiting for me to get out the compressor my mate tried the shorter impact socket on the breaker bar and the bolt came out with this. As an aside the open end though in the same plane as the body of the spanner is off set at 15deg to facilitate turning with limited access. Anyone know the angle from the body to the closed end? I can't seem to find that.

[@CliffsideStables]

Does the farmer’s market operate during church time on Sundays? Tim in northern TN

[@gn5673]

where did you get the tie rods and do you know the part numbers? I am getting ready to do the same thing on my 656

[@Lawiah0]

In the Rust Belt, every Mechanic is first trained, on how to use an Acetylene Torch.

[@r.lavernemiller5665]

We have a 656 Diesel , keeps blowing head gaskets, coolant leaks out the side of the block! Do you have any recomendations on how to repair this ?

[@JustaFewAcresFarm]

I would take the head to a machine shop, have it checked for flatness, and have it milled flat if need be. Probably need to check the block deck too. Other than that, proper torquing and retorquing when you install.

[@ryanfisher6402]

You need air tools man! Great videos

[@larryiowatexasrooster9317]

👍🇺🇸🇺🇸🇺🇸🗽🙏🏻 Enjoyed!

[@maddog2771]

Was your 656 yellow at one time?

[@norbertkurth3830]

20:25 Top right corner: Brazilian baling? Brazilian waxing is a thing but i´ve never heard of the former. ;-)

[@amymyers6898]

Hee-hee I bet you made this video to prove you were working hard while Hilary was at the Sunday Farmer's market :)

[@JustaFewAcresFarm]

Yep!

[@MrVailtown]

👍 🍪🍪

[@frankcadillac9151]

I don't know how a small farmer can make it if he isn't a passable mechanic and welder.