Replacing The Valve Cover Gasket On A 2001 Hyundai Accent 1.5 Liter 4 Cylinder Engine

[@philiphirsch7614]

This is exactly what I was looking for. You answered every question I had related to RTV and torquing. Many thanks.

[@richardlloydusa]

You are most welcome. Thank you very much for commenting, watching and the kind words. All the best.

[@louispd6828]

One thing Ill like to point out for others is that my 2004 hyundai accent \brio (identical but sold as Brio in south american market) kept the sohc engine from the year before. Keep this in mind when getting the right cover gasket...

[@simonafloat]

thank you so much for this video, very useful. £10 gasket, £2 rtv sealant, took me about an hour. nice and simple.

[@richardlloydusa]

You are most welcome. I am glad I could help. Not only did you save money but you get the satisfaction of doing it yourself and knowing it was done correctly. Here are the supplies and torque wrench I used for the people who are looking for them at Amazon: Ishino W0133-1634125-ISH Valve Cover Gasket At Amazon: amzn.to/1R2aCuD Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker At Amazon: amzn.to/1R2buzq Inch Pound Torque Wrench, 1/4-Inch Drive At Amazon: amzn.to/1R2lmsP Thanks for watching and commenting.

[@itzikvil1]

amazing quality video and very descriptive step by step operation of replacing valve gasket sealing one of the best instructive movies i have ever seen on youtube with regard to car mechanics. thanks again and keep up with the good work :) i have the same car by the way though its gasket seal which i am going to replace based on your movie is now full of oil and black stuff :/ wish me good luck and i will update on progress.

[@antonioantonello6466]

Thank you, very helpful video. However i have a question. What is the purpose of waiting for an hour after applying permatex and placing the cover on the engine ? Thank you in advance.

[@sonnykh2600]

Thank you so much for a detailed video I appreciate the hard work you put in making the video I have the exact same problem and I hope I can save 400 dollars by doing it myself instead of a mechanic. Excellent.

[@richardlloydusa]

+sonny kh You are most welcome. I am sure you can do it. Take your time, follow my directions carefully and you should have no problem getting it done correctly and saving yourself $400. Mine is working great. No more oil leak. Thanks.

[@Free_Beer]

Great video. This will be my first gasket replacement and this video explained everything very well. Thank you.

[@richardlloydusa]

You are most welcome. Thank you very much for watching and the kind words.

[@mikecline8948]

need to do video of timing belt replacement on this model. enjoyed your vid

[@richardlloydusa]

Thanks. I will consider doing so. All the best.

[@joesniffer9815]

Great video. Very easy to understand the procedure from your instructions.

[@richardlloydusa]

You are most welcome. Thank you for watching, commenting and the kind words. All the best.

[@manishpandya2006]

Thanks I need to change valve cover gasket also ❤❤

[@richardlloydusa]

Make sure to get everything as clean as possible before you seal it up. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

[@richardlloydusa]

Make sure to get everything as clean as possible before you seal it up. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

[@eddievalera2436]

Hi great video and explicit. do you know where I can get the bolts or do you know the part number for them

[@richardlloydusa]

You're most welcome. I'm glad and very happy to know that I could help you. I would pull them from the salvage yard if you have access to one. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

[@sebastianreyes1115]

Hola quisiera saber el torque de la tapa de valvula y el orden por favor

[@richardlloydusa]

72 inch/lbs or 6 ft/lbs and I show the order in the video as I tighten down the bolts. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

[@richardlloydusa]

72 pulgadas / libras o 6 pies / libras y muestro el orden en el video mientras aprieto los tornillos. Muchas gracias por mirar y comentar. Lo aprecio mucho Todo lo mejor.

[@creativelife4453]

how much torque used in kg ?

[@richardlloydusa]

Here is an article that explains it metric en.wikipedia.org/wiki/Pound-foot_(torque) I don't really think there a Kg equivalent. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

[@creativelife4453]

@@richardlloydusa thanks for reply

[@creativelife4453]

@@richardlloydusa I have another question , will i need to let engine cool down before changing the gasket, after final torque, is that possible to use the car after gasket changing ?

[@ShintekBeats]

Appreciate these vids, not many around about the 1.5 sohc accent lc. 8:34 was super funny tho haha no need to apologize!!

[@guachito33]

is that the only place you put RTV? I have a 2005 Hyundai Accent, I guess the same applies ... I have oil on top of two spark plugs so I might as well change the whole gaskets .. Thanks

[@richardlloydusa]

On the 2001 with the 1.5 litre engine that is where the RTV is suggested to go. If you have the same engine then I can confirm that it is the same procedure otherwise I can't. Thanks.

[@Dariusz_K44]

Where is in this engine knock sensor?

[@zynovixc15_47]

Boleh dong share buka kap oli grand avega nyundai

[@richardlloydusa]

Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

[@tricky.pixels]

Very informative video....thanks for taking the time to upload

[@richardlloydusa]

+Tricky Pixels You are most welcome. I am glad you liked it. Thanks for watching.

[@praveenthomas6205]

Thank you Mr. Richard. Very informative.

[@sloaiza81]

you are doing gods work. thank you so much

[@richardlloydusa]

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

[@RohitKumar-jo2bn]

How to adjust valve accent petrol 2001 souch 12 v

[@edinjusupovic8442]

Really awesome video. Thank you Richard! :)

[@richardlloydusa]

You are most welcome. Thank you very much for watching and the kind comment.

[@ademnourmalek965]

Merci beaucoup

[@richardlloydusa]

Pas de problème.

[@striela1]

Excellent video. Thanks !!!

[@richardlloydusa]

You are most welcome. Thanks for watching. All the best.

[@striela1]

Richard Lloyd Just got a question: once the job is done, how long should you wait before starting the engine?

[@richardlloydusa]

I don't think that there is any need to wait after the initial curing period. If you want to be safe, an hour or two wait should be fine. Thanks.

[@striela1]

Richard Lloyd Thanks Richard! I just finished the job, everything OK.

[@richardlloydusa]

That's great. You are welcome. Glad I could help. Thanks for watching. All the best.

[@sjariefindria9407]

Wowwww.....realy...realy....Really awesome video. Thank you.

[@richardlloydusa]

You are most welcome. Thank you very much for watching and the very kind words. All the best.

[@StepherzFromTheNuttyNorth]

Sjarief Indria yes

[@richardseeger1992]

your a big help, thank you!!

[@saulchavez3073]

Excelente vídeo.

[@richardlloydusa]

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

[@mustafa1874]

Thank you

[@richardlloydusa]

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

[@louispd6828]

thanks t his really help me.

[@richardlloydusa]

ou are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

[@msenglish8382]

great video thanks

[@richardlloydusa]

You are most welcome. Thanks for watching and commenting.

[@maorhananayev4782]

thanks i just buy my hyundai and i need to replace the gasket to

[@richardlloydusa]

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

[@supergreekaros]

NICE WORK..

[@richardlloydusa]

Thank you so much for watching, commenting and the very kind and words. I appreciate it greatly. All the best.👍😀

[@JorgeSanchez-hk8hf]

great video!!!

[@richardlloydusa]

Thank you very much.

[@SMVB-cl6oc]

love me a hundai

[@richardlloydusa]

Great vehicles. Love them too. All the best.

[@jolewae]

nice video tutuorial (hack) hyundai acceny community

[@richardlloydusa]

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.