Replacing Window In a Brick House - The Whole Process

If you are looking for a simple guide to replace a window in your brick house yourself, this video guide is for you!
Of course, replacing windows in a brick house could seem challenging. However, if you have the right set of instructions and a little DIY knowledge, you can do it pretty conveniently, without hiring a window expert. Watch this video that guides you through the process using simple, easy-to-understand instructions. You can see that the video also shows you the kind of tools and materials required to conveniently replace a window in a brick house.

[@Yellowjacket1977]

Wow! You just did what I am about to do in the home studio I am building! Thanks for the video!! This will certainly help this rookie carpenter!!

[@joe-jet]

Glad it was helpful!

[@brianherald5756]

I could have swore I was watching it in reverse,interesting steps of installation

[@tman984]

No flashing tape at bottom and sides?

[@moisesramos4170]

Nice hammer i got the same one works like a charm

[@msoul3248]

I don’t have a bender and wondered if you could have used hardee board for outside instead of aluminum siding…? Thanks for the video

[@bradders9868]

Why smash it out and damage the interior wall?.

[@joe-jet]

The edge of the sheetrock was covered by the window casing. Sometimes I also focus too much on recording and not on work 😕

[@jlatnyc]

IMO the interior damage was minimal. Not a concern at all. Good job on the video

[@bondpit8750]

Because, he was in a hurry and didn’t have the proper tools.

[@bondpit8750]

@@jlatnycMinimal perhaps but no need to have damaged it at all. Casing may cover it but there’s still several gaps being the casing that didn’t need to be there.

[@tanhtran8192]

👍

[@petp]

Nice complete video. How would you install a window WITHOUT the capping and wood on the exterior? ie; have the window frame go straight up to the exterior brick. Thanks.

[@JOE_JET_Show]

You can try to find a local company that will prepare the windows exactly to your size, then you only silicone them to the brick. These windows are usually a bit more expensive than those from homedepot. You can also use PVC trim boards to seal out the gaps.

[@jimcorn3268]

Would like to know what was wrong with the old window

[@joe-jet]

Some of the windows were in disastrous condition. The owner of this house decided to replace them all.

[@jimcorn3268]

@@joe-jet thanks

[@ddduhawk3111]

My, is that audio wretched....

[@christopherdekonstrukt444]

Have brick on sill for one and sill and one side for other.

[@martintasso7026]

Subscribed!

[@liketheduck]

You didn't show any sealant in the gap between the rough opening and the window. You're going to let in drafts and noise.

[@user-mv2lz2xv5x]

i would of just cut the frame out...besides destroying the drywall....

[@joe-jet]

Great! Good to know...

[@vapeurdepisse]

To a hammer.... Everything is a nail. What a hack!

[@jlatnyc]

It's the metal bender rentable?

[@joe-jet]

Yes, at least in my HomeDepot

[@jlatnyc]

@@joe-jet looked it up. Thanks. Didn't know it's called an Aluminum Brake

[@JVIMTM]

8:29 🫣🤔🤫😅

[@arvindmohansk01]

This guy is damaging the Sheetrock. Could have used a better prybar

[@joe-jet]

Casing covered this 'damage' so there is nothing to dramatize.

[@bondpit8750]

@@joe-jetthere was no need to damage it in the first place. Better to use composite shims also. But go ahead, keep doing it your way if that works for ya.

[@JOE_JET_Show]

@@bondpit8750 We can always do something better, faster or cheaper. Every job has its budget. Many people are perfect theorists who would do everything better. I would like to see how they replace 5 such windows a day in real life. In this video I do not teach how it should be done. It shows how I do it.

[@filacosta4047]

The music is really annoying

[@joe-jet]

Hi it's me Joe! If you want to see the new version of my videos please click here: kzbin.info/www/bejne/r3qQYY2tnt2fZpo Sorry for my English, but I'm still learning. YOUR SUPPORT REALLY MEANS A LOT TO ME! THANK YOU!

[@MotoGolocina-kv6ws]

Too much music no info.

[@JVIMTM]

😂

[@JOE_JET_Show]

My new channel with shorter videos: kzbin.info/door/qVzbBuV0Ivi_GiQ-xXVo6Q