Resetting/Relearning 2009 Chevreolet Malibu TPMS System

[@zoukiller360tv5]

The tension was killing me LOL glad it beeps twice on you thanks for the video

[@celticlightning9703]

LMAO!!!! You can feel the stress building on that last tire. I thought I was letting air out of my own tire.

[@lawrencewobidikeamandah6370]

Can I do this without the remote?

[@faz8690]

Thank u man. I did this today. This is really working.

[@donnystacy5420]

What If u dont have remote for your car

[@louiedoyle3711]

I have to same problem

[@oneloveyessah]

@@louiedoyle3711 me three

[@jbtlive88]

Some models if you don’t have a fob and you cycled the headlight switch on and off fast three times can put the car in the learn mode. I may be mixing this up with other Chevy models, but have seen it work.

[@blackguitar86]

Our 2009 does give the reading “Svc Tire Pressure”. One of the tire pressure readings is blank. I checked all the tires and they have the correct pressure. Is this an indication that I need to reset my car using the technique you just showed us??

[@tinaguarneri8029]

I did this 3 times and then went to check tire pressure reading on info dash and it did not register any pressure at all there was only a dash with no reading. What do I do now. The light is still on dash for tire pressure.

[@saca7450]

Yes.me too.

[@AlexCruz-et7rd]

Me too

[@BackYardScience2000]

Get new sensors.

[@franklinmarcel1430]

Hi. Please what if my car doesn’t have a remote keys?

[@gamingwithdavid7822]

Is there a way to do this without the key fab I bought mine used and it didn't have one

[@Geo24400]

My right rear tire didn’t beep at all, and when I looked at my dashboard and turned the key off the TPMS registered zero psi on all four tires. I think I have one bad sensor.

[@jesseowens2917]

Are the sensors the valve stems themselves? My front passenger side always reads @ 8-0 lbs. of air and it does it constantly!! Where are the sensors located??

[@drivewaygarage1561]

The sensor is part of the valve stem. It's inside the tires

[@paulabow69]

How do you reset it without key fob

[@huntingupland]

Saw another video and tried this and didn’t work. Will I have to use alternative fob?

[@rubend.rodriguezjr.530]

How can I do this method without a key fob?

[@angelomayweather3544]

I’m tryna figure out to

[@Dlri]

@@angelomayweather3544 you should be able to press and hold both the menu and enter buttons to enter the settings menu, and there should be one that says “TIRE LEARN?” and you should be able to press and hold enter to enter learn mode.

[@bonos3208]

@@Dlri where’s that?

[@martinidoyle]

how we can check the tpms module when is not reading from new sensors install

[@angelaeric6366]

The front to work as described, when I got to the right rear, I practically deflated it to about -0 heard 2 hooks, not one. Should I assume that is the bad sensor?

[@zamiracleedwards]

I’m hearing two beeps on my first one I don’t know what’s going on I have a 2008 do you know what I should do?

[@melaniesipchand5614]

@@zamiracleedwards Same, did you eventually figure it out?

[@nytshade2]

@@melaniesipchand5614 Experienced this with my daughters 2012 Malibu. The two beeps is the car exiting the learning mode. This happened when I got to the front right tire where I let all the air out and got nothing but the two beeps. I'm assuming its a dead sensor. Gonna order 4 from Rock Auto and replace all of them at the hobby shop on base. Gonna run a wiring test on the steering wheel airbag while im there since the car is throwing a code B0013 also.

[@jimm2031]

@@nytshade2 same exact issue with me. did you have a bad sensor? thanks

[@rnull2237]

Here's my problem, I noticed left front tire low, checked it with the system and says left front 28 psi, I put in it 40 psi, get in car and it says 40 psi right front, do I need to do the relearn method?

[@bluemonza1]

Yes

[@jimm2031]

hi,made it to passenger side front and let out air but horn beeped twice and all tires aren't reading any pressure now,help 2012 chevy malibu

[@biancamartinez5424]

What if I don’t have the keyless remote ?

[@hermanduenne5042]

What if you don't have keyless entry

[@oneloveyessah]

What if the remote dont work?

[@finnesse180]

Question, where'd you get the 4 sensors? How much were they? Thank you!

[@christopherwilliams3388]

Just bought sensors on Amazon for $40. Changing them today so going to see if they work. Video is a big help if it does. I'll let you kno afterwards

[@Redhulk-zw9hq]

@@christopherwilliams3388 did they work

[@papisnagzz9949]

@@christopherwilliams3388 did it work ??

[@BackYardScience2000]

@@christopherwilliams3388 did it work? Or are you not going to answer? Did you forget to do it? Lol

[@WildInKY]

@@christopherwilliams3388 hey Chris. You're taking an awful long time to let us know! 😄

[@tavondouglas8461]

Will this work for an 2013 malibu

[@aa1567]

I really appreciate tha vídeo , is a big help

[@chancenation2840]

I can’t seem to get my car to beep then I press the bottoms on the fab

[@bereniseoortizrodriguez285]

Is necesari that remout ?

[@Grateful-wv6ty]

My didn't work...same issue with the last tire. Took long to beep

[@MyVideosOnYT1]

Doesn't work on my 2009 Chevy Malibu

[@cesarramirez3462]

Hi i did o All processes but i just hear de beep on rr tire the rest did'n sounds and almost the tires get empty air do you have an advice to solve my issue

[@LehewTech]

Yes you probably need new sensors if your car is more than 5 years old

[@cesarramirez3462]

ok thank u

[@FATFATTY2BY4]

Are you able to do this without the unlock and lock door thing?

[@ashleighboone3685]

Wondering the same

[@dianeethridge6897]

Unfortunately, you have to have the fob to reset it😵‍💫

[@jacklee3608]

I tried to press unlock and lock and it didn't peep

[@maximalniy]

I have the same issue, whatever I do it doesn't beep

[@jaredsimpson4719]

Use a scan tool to reset it you can order a 10 or 15 dollar bluetooth obd2 adapter off ebay and use your phone with torque lite app to reset it it's easy or use a reg scan tool

[@ncjuan22eden]

Nice video good explanation but i need to know how to reset the (key fob low battery ) can u help me on 2011 Chevy Malibu

[@wonehunnit209]

💯 Great Video Straight To The Point And It Worked. Saved Me Time And Money.

[@mercederamirez9892]

did u ever figure out how ? bc i need that fixed too

[@ghd2366]

Just seeing this now, but low battery message for key fob is an easy reset. Pop hood, removed negative cable from battery for at least 30 seconds then put back on. Worked for me for the past few days

[@ghd2366]

Just seeing this now, but low battery message for key fob is an easy reset. Pop hood, removed negative cable from battery for at least 30 seconds then put back on. Worked for me for the past few days

[@ghd2366]

Just seeing this now, but low battery message for key fob is an easy reset. Pop hood, removed negative cable from battery for at least 30 seconds then put back on. Worked for me for the past few days

[@ricklooper9773]

My Walmart will replace bad sensor and check the rest of them for under $ 30.00 ea. Wheel

[@JasperJokerII]

Tune in tomorrow for the last tire

[@HysTerYY1]

What if it beeps twice after letting air out

[@michaelmancusi9054]

My 2009 MALIBU needs a new sensor on tires

[@JimboBowers]

His camera man honked his own horn

[@leetaylor4471]

What if your key fobs broken ? Lol

[@jasonhamilton258]

It's Chevy for ya

[@TheNinja4]

Sadly not one beeps... what a fucking joke of a system

[@Dlri]

SERVICE AIR BAG :)

[@dfwpiper1]

that's the dumbest reset process in the entire history of dumb reset processes.