Resin 3D Printing in the Cold Just Got Easier!

It can be challenging to print with cold resin, so Chitu Systems came up with a solution! This is my review of a mini heater that can keep the chamber of your resin 3D printer consistently warm at a specific temperature.
****************************************************************************************
Resin Heater
amzn.to/3Q8ES9X
www.chitusystems.com/product/...
Standard 8K Resin
amzn.to/3OG4k7l
Rigid Resin
amzn.to/3Ob4t0Y
****************************************************************************************
Coupons and Deals:
JLCPCB 3D Printing Starts at $0.30 & $54 Coupons for New Users Here: 3d.jlcpcb.com/?from=FigureFee...
Card Mafia: Use the Promo Code "FigureFeedback5Off" for 5% Off Your Card Mafia Purchase! : www.cardmafia.com?sca_ref=2492569.wSUwkQ9aSr
****************************************************************************************
Socials:
Check out my other channel: / @jeremyhill
For business inquiries, email me at [e-mail]
Follow Me on Threads: www.threads.net/@jeremythill
Follow Me on Instagram: / jeremythill
****************************************************************************************
My 3D Printing Equipment (Affiliate Links)
Anycubic Photon Mono 4K: amzn.to/3odVEKT
Anycubic Wash and Cure 2.0: amzn.to/3pH41ii
Anycubic 3D Printing Grey Resin: amzn.to/3Wdv8xK
OnePeng Grey Model Resin: amzn.to/453cIDF
Anycubic Eco UV Grey Resin: amzn.to/45cB4ei
Siraya Tech Easy Grey Resin: amzn.to/3MyZCam
Mealos Silicon Mat: amzn.to/3pRJoAg
Gorilla Super Glue Gel: amzn.to/42c4TcA
Vallejo Model Air Set: amzn.to/3oTfGdP
Timbertech Airbrush Kit: amzn.to/3CbuuI0
Creality Ender 3 Pro: amzn.to/45dvGIe
Creality Rainbow PLA Filament: amzn.to/3WfYLP9
Inland Silver PLA Plus Filament: amzn.to/3BxpHQO
Inland Grey PLA Plus Filament 2-Pack: amzn.to/432tmSg

[@flipnutdodad8841]

Awesome review

[@WorldWide3133]

Great vide! I'll be moving my printers to the garage and using this to heat the resin. I agree that this next gen of printers will focus on heated vats, along with connectivity, but this will help me get by in the interim

[@krzysztofmathews738]

Great demonstration. Thank you!

[@FigureFeedback]

My pleasure!

[@321357w]

Nice to see that people are now recognizing that temperature and resin viscosity are a major factor is resin printing issues. Sadly, Chitu don't sell via Amazon Australia which they need to consider as we certainly need the option of purchasing them in Australia. Great video and nicely presented.

[@chrisearl7941]

Aliexpress is our friend in Australia We also don't have the shipping delays that North America is subject to (1-2 weeks for most of my orders), nor do we have the high shipping cost ordering direct from Asia.

[@stuartward6067]

Mine arrived today got it for $53 with free shipping your video was very helpful and will be setting mine up at the weekend.

[@FigureFeedback]

Awesome!

[@BADGOY-45]

Whats the power consumption? Thanks

[@PureChaos69]

Very interesting! I've been wanting to get a resin printer for a while now, but have been concerned about the fumes of it in my office, so I thought about making a "workshop" (probably just a reasonably insolated shed), but winters here can be HARSH averaging 20 degrees or lower, so I'd probably get a space heater for winters, but that doesn't feel like enough... this could definitely be the answer to that! Very well made video btw!

[@FigureFeedback]

Thank you! I think this is made for people in your situation. I tried a space heater as well, but it wasn't enough to heat the garage properly. Too many drafts from outside.

[@mikewhite2991]

informative video, i've subscribed. More lighting would be great :)

[@BADGOY-45]

Could you please check how many watts does the heater uses? Thank you

[@rewris]

Wished you dropped a probe thermometer in the resin to get the actual temp of the resin.

[@dovmerrill804]

About the rubber around the lid: aren’t you supposed to leave a little gap for the heater/controller cable to exit under the lid, and by doing so, the lid will sit flat on the base of the printer?

[@FigureFeedback]

Yeah, that's the correct way to do it.

[@PeterBoyadjian]

I like my thermalvatband its a plug and play, I dont even know its there half of the time.

[@FigureFeedback]

That's a neat product! I haven't seen that before.

[@heffiagametech8094]

I just bought one.

[@FigureFeedback]

Enjoy it!

[@BADGOY-45]

Could you please tell me whats the power consumption? Thanks

[@heffiagametech8094]

​@@BADGOY-45i will check and get back with you on that. I have not set it up yet.

[@SAMZIRRA]

Sous Vide cooker works amazing btw.

[@FigureFeedback]

Do you lower it into the resin like you would with water, or does it just hover above the vat?

[@SAMZIRRA]

@@FigureFeedback yep, I actually dismantled one I has laying around so the heating element would fit in the vat

[@seurinck]

Is it normal the heater stays on when plugged in ? Even if you do not want to use it ?

[@FigureFeedback]

Yeah. I just pull the plug apart when I'm not using it.

[@Smecerul08]

How do you deal with toxic particles from the resin?

[@FigureFeedback]

I made another video talking about that in different ways. kzbin.info/www/bejne/aom0epV9iMh9gaM

[@dariussteele3843]

Does it come with multiple magnets? I want the ability to move it from printer to printer.

[@stuartward6067]

No just the one but they look pretty standard, like the ones you canget for a phone holder in your car

[@FigureFeedback]

It only comes with 1 magnet.

[@Wrld_Nme]

Would this work with the photon mono 2?

[@FigureFeedback]

I'd imagine it will since that printer is just an upgraded version of the one I use in this video.

[@chrisSosa1]

What if you warm up the resin with a heat gun?

[@FigureFeedback]

I think that can work initially, but my concern would be the resin cooling down over time. Right now, the temperature of my resin is 53 degrees without the heater. It would warm up a little during printing, but I doubt it will be warm enough to reach its optimal temperature in a cold environment.

[@8BitLife69]

Why on earth would you put your 3D printers in a garage, when you have a warm house where they're SUPPOSED to be? I swear, you people on the internet freaking out about 3D printer fumes are loosing your gahdamn minds. LMAO IT'S FINE!

[@FigureFeedback]

Why would you want to smell fumes of any kind if you have the option not to?

[@fynnpeters2844]

Also the fumes are toxic

[@8BitLife69]

@@fynnpeters2844 No, they are not.

[@selicatoart3362]

Fumes are absolutely toxic and produce rushes on people skin, you are not documented at all

[@8BitLife69]

@@selicatoart3362 Read the MSDS you dolt. It absolutely is NOT.