Resin Art for Beginners: Complete Resin Coaster Tutorial

A step by step resin art tutorial for beginners. Create beautiful resin coasters following this how-to. If you enjoyed this video, leave a like and subscribe for more :)
My Instagram: / summergirldesigns
My Mom's Instagram: / wildheartresinart
Facebook: / summergirldesigns
Etsy Shop: www.etsy.com/shop/SummerGirlArt
If you would like to support my channel: paypal.me/summergirldesigns
Buy me a coffee: ko-fi.com/summergirldesigns
US Amazon supply list: www.amazon.com/shop/summergir...
EU Amazon supply list: www.amazon.de/shop/summergirl...
Use code ‘SUMMERGIRL’ to save 10% off €40 or more from Dipon kandydip.de/ecom/prestashop/
^
Resin: EpoxyPlast 100p CoasterCast
Top coat: Honey Resin
Pigments: 24 Karat Rose Colorshift Pearl, Hot Cappucino Pearl, Ocean Wave Pigment Paste
Here are the products we used! Some aren’t available but I have found similar products:
U.S:
Resin Coaster Mold: amzn.to/3GdHQ5R
Kitchen Scale: amzn.to/3FSFISA
Paper Cups: amzn.to/3FVtGru
Gold Leaf Flakes: amzn.to/3uJwz9u
Blue Holographic Flakes: amzn.to/3KXTnKk
Silicone Make Up Brush: amzn.to/3qfNKiu
Butane Torch Gun: amzn.to/3fNRX7o
100 Pieces Jumbo Craft Sticks: amzn.to/3308MFm
Gold Edding Marker: amzn.to/3Mmzk8M
Liquid Latex: amzn.to/37XTEhO
Heat Gun 3-Temp Setting: amzn.to/3nSIHTa
World Safety Blue Nitrile Disposable Gloves, 3.5 Mil - Latex Free: amzn.to/3eKrxSA
Full Face Respirаtor: amzn.to/3vDSQom
#resin #resinart #resintutorial
Music: soundcloud.com/user-728800057...
Music by Mr. Jello - Sunrays - thmatc.co/?l=3A00577B
Music by F1fty Beatz - Us - thmatc.co/?l=D08E2792
Music by F1fty Beatz - You - thmatc.co/?l=E9C220A6
Music by Mr. Chase - Midnight Oil (feat. Cere) - thmatc.co/?l=6B204B42
Music by Mr. Jello - Last Adventure - thmatc.co/?l=5B327D43
Music by WABI SABI - spring afternoon - thmatc.co/?l=8DDEFA26
Time Stamps:
0:00 Prep Work & Safety
2:08 Mixing Part A & B
3:33 Mixing in Pigments
4:52 Pouring
7:47 Demolding
8:50 Final Touches
12:34 Final Product

[@SummerGirlDesigns]

If you enjoy our tutorials consider joining our channel to support our creations, receive early access to videos, and monthly shoutouts 💙 kzbin.info/door/zbm-Nei-GzNwjlA2S-MR-Ajoin

[@Strawwberi]

I've been watching a lot of "Resin art for Beginners" for Epoxy resin, and so far, your video has been the only one that is very adamant on using gloves and ventilation and masks. The last four or so videos just don't point out that this is important, which makes people think it's not something that needs to happen. So I just wanted to thank you for showing that you are using gloves, and your mask, and keeping things in a safe manner. Also the coasters are beautiful. Thank you for this video.

[@manahilsadiq1102]

These colour combinations are so pretty loved it.

[@knifeturtle]

so much cleanliness and safety, mad respect

[@suemendell358]

Thank you! Excellent tutorial.

[@lilydarcy8394]

This is beautiful, I wish I had time to try this.

[@Isabel-gp5do]

You're pieces are really nice! I love all your projects

[@mabel.e.kgalley9710]

This is a beautiful work done, like the video. Thanks for the tutoring

[@mindyestes4436]

These are so pretty! Thank you for this detailed tutorial! I really wanna try it now!!🤗

[@jeaniehatch2080]

Great tutorial! Ty!! So pretty 😍

[@LaurelBowden]

Thank you for showing the contrasting techniques, just what I wanted to see!

[@SummerGirlDesigns]

Glad it was helpful!

[@emilyhird2332]

Absolutely gorgeous ❤ thanks for sharing ❤ Louise and Emily

[@DoctorOnce]

Those are gorgeous!

[@KalaDesigns]

Kala Design is very grateful to you for all your videos; they help us a lot in creating new work techniques. :)

[@M.K0002]

This is so beautiful 😍

[@mreinstein48]

Gorgeous!!!

[@hnubhliyang7477]

That’s so fun!! ❤

[@triciac1019]

Oh gosh, those are gorgeous! I haven't started making anything yet. Hopefully I can start soon.

[@melodywilson5255]

Thanks for this! Gorgeous!! And how did you get hold of my scale?? Mine looks identical! I wish i could attach a photo! The exact same resin marks!😆

[@Meagain921]

Very helpful. Thank you🤗

[@nessela]

gorgeous as always

[@SummerGirlDesigns]

Thank you so much 🤗

[@niroshinihettiarachchi2484]

So beautiful ❤

[@CherieHeyn-hf2sy]

Beautiful!

[@natalie9884]

Need that torch lol. Been using a hair dryer for bubbles

[@BasketballMichaelJordan]

Beautiful 😍

[@MsPraphulla]

wouldn't the gold border colour fade when washed? well, do we wash these at all or we only wipe them clean?

[@BasketballMichaelJordan]

Thanks for sharing

[@anjumnaz530]

Beautiful

[@resinartbycatherine6314]

❤️ Beautiful...😍

[@aminaelsadr947]

Very lovely. Will these coasters withstand heat? like a cup of coffee?

[@natalie9884]

This is amazing! Thank you!! My boyfriend has a flooring company and gifted me with some Apoxsee and hardener. Wondering if the same steps and techniques would apply even though it is industrial and not craft grade.

[@purvaayachit2566]

hi very good video and i loved your art , could you plz tell why did u use liquid laxtex arround the edges ? after that you poured top coat why not all over

[@betsyhomedecor5716]

Thanks for the info🙏 Is it ok to use a surgical mask if the stated one is not available

[@amazingthings2463]

Wow 👍👌💕

[@njadzeman]

thank you so much for the tutorial.. but i have a question.. i hope you see my comment.. hmm may i know.. after you mix your color with the resin.. should i wait few minutes before i pour my resin into the mould.. or i can straight away pour it after i mix the color 😅? Thank you in advance ❤️

[@awaisnasir8097]

superb 🎉❤

[@daughterofdivine8000]

Amazing video ⚡

[@uniqueexpressionsartwork5252]

Lovely!!!! Do you always do a top coat?

[@COOKINGBIRD]

Nice my friend

[@muslimalao2542]

Hi, what method or process do u call in the last part u did when u put some mixed epoxy resin? And what is the ratio?

[@drsonalisahu]

@SummerGirlDesigns beautifully explained. Commendable. Can you clarify, at the end when you poured clear resin, why did you not use the torch gun?

[@gomezcaroleen20]

Is it necessary to do top coat?

[@ellem3891]

Superb

[@angelamariaflower3818]

Muito lindo

[@sarvene1798]

Hi! Why do you do the second step with the latex and the resin? I’m a beginner, and your video is the first I found- very helpful.

[@jony7151]

Yeah, I had the same question about the latex and second resin. @summergirldesigns

[@Kathy-Carr]

The liquid latex will protect the bottom of the coaster from the resin top coat. When the top coat is dry, the latex will just peel away and the bottom of the coaster will be clean and beautiful. 😊

[@tangishores3668]

These coasters turned out so pretty. What did you use around the edges that you pulled off before painting the edges?

[@torimcclary5242]

Liquid latex she applied before the top coat

[@Flashpg]

Hi great video, I'm wanting to get into resin crafting so found your video great. Just wondered though, what was the reason for using liquid latex. I thought to stop the top coat resin from dripping over the edge but wasn't sure.

[@JasonBuis]

I am wondering the same-- the left two pieces don't have any on them, by the looks of it...and the right two would not have the top coat on them if they latex is removed-- it would stop the top coat from coating that section. I am really confused.

[@camaymitchell8033]

Hi Summergirl .... Do you have classes???? You a re Awesome and Thankyou for sharing ❤

[@victoriamaszkiewicz8470]

So beautiful!! Quick question how do you clean your mixing cups ?

[@meganpuckett586]

Let them dry take out as much dried debris as you can and then wash with soap and water :)

[@tlrmd4you]

How do you do your top coat and not get it to run over the edge? And then have run marks? Is it a thicker top coat that you use? Thanks, your stuff is so beautiful!!!!

[@SummerGirlDesigns]

The main part is pouring just the right amount of resin on the coaster. I usually start by pouring too little and then add more in spots that need it. If it runs over the edge I usually wipe it off the edge, but it can also fit into the geode shape! Hope this helps, thank you so much 😊

[@lydiaj.3669]

Hey @summergirl can you put the link for the glitter flakes here? I love youre Art so much!

[@Light-n-love]

Amazon has so many of these products and local craft stores do! ;)

[@anitamoses710]

Wow! Very Beautiful

[@frimguy1054]

Fire

[@natalie9884]

Is the liquid latex a staple to use? Just can’t spend any $, and wondering if it’ll still turn out decently. Thanks so much! Ps your voice is so calming (and your work is great, obviously xo)

[@sarahgreen8409]

It will b fine without the liquid latex, if ur concerned use tape on the underside but it isn’t needed

[@ButtercupCreations]

These are beautiful! Is the silicone stuff necessary? What is it for?

[@purplepigfarms5888]

Silicone moulds are used to make specific shapes with resin/etc, if that was what you were talking about. For example: If you want to make a pig out of resin, you could buy a silicone pig mould and pour the resin into the mould to make a pig.

[@lauriepijanowski3]

Where is your list of products used? I can't find it, thank you.

[@zainabakhtar3832]

How did you measure the resin by weight... I mean if u r taking 20g of part A then u should take 10g of part B....always haft of resin... Please tell me.......how to measure resin...for coasters... Btw...your caosterss looks 😍😍😍😍😍😍

[@Sam-fo2hj]

Do the cells/cracks just happen naturally? Do you use any silicone or alcohol drops? Or is it the white that helps form this look?

[@marybois-byrne6729]

What's a good temperature range for doing resin work?

[@nayyaraansari9808]

What did you used to protect them... The thing you peeled off later? What's the use of it?

[@user-vz2nt3gi9d]

Hiii. Im in love with your work. But I always have this one question. How do you clean your products? Like I pour my resin into plastic beakers to mix and obviously my goal is to reuse them for my next project. But when the excess dries, it’s almost impossible to get the residue off of them. So is it just better to use disposable cups when mixing in and pouring my resin into my molds??😭😭😭

[@Light-n-love]

What was the liquid latex used for again? And how do you feel about products ending up in the land fills or the oceans that aren't biodegradable ? I feel its important that we all do our best to cut down on wastes...etc...

[@oluwadamilolaolasunkanmi7435]

Can one use a heat gun instead of the blow torch?

[@cheryl4435]

how do you dry the edges you filled in with the golden marker pls?

[@Esmebudgetz]

This is amazing- do you offer any online courses for complete beginners? X❤

[@suzanavacar8531]

What for a pan do you use ?? ❤️

[@ledybiz]

Very beautiful! I would like to know what you put on the back side along the edge. What is the name of the product in the red bottle? Thank you😀

[@cheribarker1870]

Where do you get all this stuff/supplies to make these?

[@rinstravelandlifestylevlog5556]

Can I use a Normal acrylic color instead of pigment paste?

[@jackwylie382]

I have a question which latex brand do you use for your coasters?

[@jessiedestro7671]

I got one of the tray resin kits from Kmart to try out. Followed the instructions (100ml mix to 50ml hardener). Two weeks later still not properly set. Help? Not sure what is wrong. No reviews suggesting product issues.

[@Goldenbudgetsavings2]

How much does it cost to get started and where can I get them

[@patriciahinz8488]

I dont understand why you had the extra layer at the end? Are they not heat resistant with the resin once its mixed and poured into the mould? I’m a very early beginner so it is a big question for me! Thanks Trish

[@ninaleoni_neshana]

The reason loses heat resistance when putting pigments in it 😊 so that’s why you want another clear coat on it

[@michellemihaylova2432]

After the top coat is poured the coasters will become very shiny, glossy and with high volume. Most of the resins are heat resistant untill 70 degrees C and your clients wont be able to put a cup with hot coffee on it. The coaster will melt.Thats why is good if you put another heat resistant layer. :)

[@1999737m]

@@michellemihaylova2432hi, do you have a link of a topcoat or a name?

[@makaylamarshall1966]

Do we have to use the mask?

[@sharlinyoukhaneh102]

Hi, how can I get the part A and B rasin? Can you please guide me

[@sawmyathomas4754]

Are those colours mica powders?

[@mehjabinshaikh2306]

Which one ratio 2:1 or 3:1 for this mould

[@ssimp211]

Is the mask really needed? 1st time hearing abt the mask using resin

[@mehramehak1188]

Mam whenever i mix resin it turns into white creamy form. Plz guide me what am i doing wrong.

[@rabiyaraheel96]

What is this marker called that is use for outlining

[@dreamcatchers1987]

When to use 1:1 and when to use 2:1 ?

[@lisanunez9288]

Do the cells appear from the Resin?

[@rafeequeansar9316]

Where do u supply?

[@jollyjanet9445]

I used less hardener and it art work didn’t cure. Now the resin is stuck to the silicone mould and doesn’t come off. Any tips to remove it?

[@charmainecamillesalonoy7487]

Hi! Can someone help me see the links of the materials please?

[@charlenecrichlow9550]

What is pigment paste?

[@HassanAli-gy4oj]

Kiya rean plates main khana unhelathy hai Matlab harmful

[@alidadebruyn3560]

How much resin did you originally mix before separating?

[@ukrosie]

Why do you use liquid latex on the base?

[@michelleelise7249]

Just in case resin drips down from the sides and gets underneath the coaster. If it does, the latex makes it super duper easy to just peel right off!

[@hawraaalmosawi9896]

Hi. What is the resin viscosity?

[@michelleelise7249]

The thickness of the resin! Low viscosity is like water and high viscosity is more like molasses 🙂

[@cynthiachinweoke6928]

Which store can i get the material of resin please as a beginner

[@SummerGirlDesigns]

My favorite is Craft Resin! You can use my code ‘summergirldesigns’ for 10% off 🤗

[@emanjirdeh4054]

Why is it important to make a top coat...what if I just leave it like that?

[@michellemihaylova2432]

After the top coat is poured the coasters will become very shiny, glossy and with high volume. Most of the resins are heat resistant untill 70 degrees C and your clients wont be able to put a cup with hot coffee on it. The coaster will melt.Thats why is good if you put another heat resistant layer. :)

[@pamwilson6296]

It's difficult to see your supplies used. What are the pigments. They are not in your supply list either. Thank you. They are beautiful

[@kang_sora]

Just asking why do we need a mask while using resin ??? Ik it's a dumb question

[@triciac1019]

It isn't a dumb question. Resin is not good to breathe in.

[@srabaniroy5109]

I have done one resins art, but I got short with resins, what to do now, if I order now, it will take seven days to come,. If the resin comes after seven days can I complete my work then

[@lolafunworld9329]

Please how do you order Because ave been trying it not working

[@linamanrique5340]

Just put your weighing unit in a plastic so i wont have droplets of resin

[@zainebahmed1313]

ممكن اعرف الوان اي

[@shahanamuthu2000]

Mould size please

[@worthy1959]

Why did you use latex

[@stephaniebowers2696]

I thought A & B had to be = parts???