Resin Coasters - How to make burgundy agate, geode inspired coasters using silicone molds

[@ParanormalGirl5]

They are absolutley beautiful.

[@alpapatel4229]

Beautiful.

[@alb91878]

Absolutely gorgeous! I love the transparency in the middle. To me it adds authenticity to the look!

[@EdnaWargon]

Thanks April, love your comment 💋😍

[@usherl250]

Wow, I love that color, so rich looking. Beautiful coasters

[@EdnaWargon]

Hi Laura, thanks. That colour really does remind me of a good bottle of Bordeaux 😉💖

[@creativecrafts9685]

Omg i love how you did the video. Thanks for the tips.

[@EdnaWargon]

Thanks 💜🤗

[@saratarekseliml7088]

Great job👍🏻😍would you please do a video about how to make your homemade silicone molds? Thanks in advance!😊

[@rubinanasirarain6029]

Beautiful

[@EdnaWargon]

Thanks Rubina 🤗

[@helenlindley8995]

Beautiful colours

[@EdnaWargon]

Thanks Helen

[@StephenWarrenArt]

That red is so nice 👍

[@JOTZdesigns]

Beautiful! 😍

[@UrooCreations]

Woww... These are so gorgeous, thanks so much Dear for sharing this wonderful tutorial 😘glad to know about you and your wonderful work... Love

[@EdnaWargon]

What a lovely compliment, thanks my dear 👍😊

[@VICKY-dk3bh]

Hi, what you do is great ! If I make/create a plate that I don't like, can I modify it ?How can I modify a resin plate ? = put it in the microwave to melt it? In hot water? Or with a paint stripper? Thank you so much.

[@EdnaWargon]

Hi Vicky, you cant re purpose cured resin, its a type of plastic it wont melt back to liquid form, I wish it would sometimes but it cant 😘

[@VICKY-dk3bh]

@@EdnaWargon Thanks very much !

[@camiwalmsley7084]

Hi there! I'm loving watching your work! Typically how thick do you pour your coasters? Or do you measure the resin by ounce for each one?

[@EdnaWargon]

I do measure sometimes but most of the time i mix by eye 👁 🙃

[@itsmeskitty]

It's really nice! What color did you mix to have burgundy?

[@EdnaWargon]

I think it was a plum from Just Resin.

[@semanuraltintas5257]

Hey teher these are beautiful. Which gold do you use? 🙈

[@EdnaWargon]

A gold metallic mica powder, any will do.

[@kristinekapteyn8973]

Love these. How deep are your homemade molds

[@EdnaWargon]

Around 0.5mm

[@kajaklemenc4989]

Love the midnight violete colour 😍 how much of the justresin colour do you mix into the resin (what's the racio)?

[@EdnaWargon]

Its one of my favourites ! Its quite opaque so i dip the end of my spoon and mix that in. You go by eye 🥰

[@kajaklemenc4989]

@@EdnaWargon thank you ! I'll try that 😁

[@novemberrain2184]

These are amazing. Like truly amazing. Never experimented with this medium. It scares me. Can you please tell me the proportions? Do you mix both clear resin and hardner then the midnight violet? How much of each do you put? I would love to try this but it seems very complicated😱

[@EdnaWargon]

Hi it can be daunting if you're a beginner. I'll be doing a tutorial soon specifically for anyone with zero experience but in the meantime have a look at some of my other videos you may pick some tips up on how to mix resin.

[@novemberrain2184]

@@EdnaWargon thank you edna. That would be wonderful. Your work is truly breathtaking.

[@Eren-Bruda]

Magnificent ❤️...any mold release spray is required?

[@EdnaWargon]

Nope. Not with silicone ❤️

[@rrutaba]

Hi. If u don’t mind can u plz tell what things r used in making coasters? Actually a technique in making resins stuff r not available. TYI

[@EdnaWargon]

This video will help you 🙂 kzbin.info/www/bejne/gpeqeaGGaLGisMU

[@passantsalah9059]

It’s really nice, could you please let me know how do you paint the sides with gold

[@EdnaWargon]

With gold pens or gold leaf. Check out my other tutorials for more information.

[@carolbear5337]

All of your creations are beautiful! I'm interested to get the premium heat resistant resin that you have a link for, but just wanted to ask you if this resin will work for hot beverages? I'm having trouble finding a resin that hot coffee mugs won't stick to! Thank you so much.for sharing all your wonderful art with all of us!

[@EdnaWargon]

Thank you Carol, nice to have you watching 😍 when it comes to the resin question send the girls at justforyouonline.uk an email, they're a nice bunch of ladies and ask them all the questions to do with resin since I'm not the manufacturer I just use it. However I personally never put anything super hot on any of my coasters because in my opinion resin is a form of plastic and anything hot would melt it or leave heat marks. I have used it for warm cups and even in my candle plates with candles lit and it works fine. 💕

[@carolbear5337]

Thank you so much, I will reach out to them! Keep doing what you do!!😍

[@cheryllicata4198]

Stonecoat is heat resistant up to 500 degrees.

[@EdnaWargon]

@@cheryllicata4198 I'm in france, shipping costs a fortune for us in europe! If they want to send me some try, id be happy to test it 🙂

[@carolynboyd616]

Where did you get your molds? These are very pretty.

[@EdnaWargon]

Hi Frank, thanks. They are my molds I make, I do sell them but they are not on my website for the moment. If you're interested send me an email, [e-mail].

[@EdnaWargon]

@Natalie Peluso Not for the moment, I need a lot of time to make them, when I do I'll post it here or on my Instagram page :)

[@debiallard418]

gorgeous color! Do you put a flood coat after gold trim? TY!

[@EdnaWargon]

Thanks. No. The gilding is always last or it loses its shine 😊

[@zcbtamu]

Do you think you could get a similar effect with purple mica pigment rather than a pigment paste?

[@EdnaWargon]

Hi AM, absolutely, I love mica in resin. 👍💖

[@ShiftinSwiffer]

I’ve been watching and trying your tutorials but when I do it mine doesn’t sink into the centre as yours does as much. How much of the clear should I be pouring compared to the other?

[@EdnaWargon]

Hi Melody, just enough clear to reach the top of the coaster.

[@sabrinastewartphoto6902]

Really really beautiful thank you for showing your mistake

[@luvtee63]

Beautiful !! Yes no "Nips" lol

[@luvtee63]

Edna where do you find nice boxes from ?

[@EdnaWargon]

@@luvtee63 Amazon :)

[@palads6286]

What brand paint do you use for the gold border?

[@EdnaWargon]

Liquid leaf

[@keilahcamara9509]

Where did you get your silicone mold

[@EdnaWargon]

I make them homemade. ❤

[@nooraf.o._0008]

It all seems so easy to apply but when you really Do all things gets so messy and difficult and you can't keep on the right Texture! 💔

[@EdnaWargon]

Aw sorry to hear that, I wish I could give you a personal tutorial, there's a technique to it but practice and you'll get there 😍

[@notebookluvr]

Just like everything else, there is learning to be done and perfecting a technique takes time. With a medium like resin, you will probably find it hard to make the same thing twice. It will be similar but not exactly the same. And you may even find a way that works out better each time you think you've got it down. Be patient with yourself and don't give up!

[@harnaazsandhu442]

From where can I get silicon moulds?

[@EdnaWargon]

I will be restocking soon 🥰

[@tvillarreal778]

Where can I find that pigment paste?

[@mba75006]

Is there a way to buy some ?

[@EdnaWargon]

Hi. Im restocking soon. 🥰

[@FirebladeCBR]

What resin do you use?

[@EdnaWargon]

CRAFT RESIN - For a 10% off coupon code use this link craftresin.refr.cc/ednawargonart1

[@minamiloudi5297]

Hey, how much resin we need to make 6 coasters??

[@EdnaWargon]

Hi there. Look online for resin calculator and add the details of your molds....

[@deannwilson3553]

How did you make the molds? If you don't mind me asking.

[@EdnaWargon]

Silicone rubber 🥰

[@leelastoma5809]

DeAnn Wilson you can also buy a silicon mat on amazon about 10.00 then with Kitchen silicon in a squeeze tube from homedepot by the caulk stuff. Squeeze a ring/ shape onto the silicon mat . Let silicon ring dry then pour in resin. You can make custom molds like this.

[@EdnaWargon]

@@leelastoma5809 that's correct. Watch this video I did last month using caulk 😘 kzbin.info/www/bejne/fXiXe56VdtWAidk

[@tazminmoore455]

Beautiful, rich colour and they turned out stunning in the end. I've recently started using resin and I'm having issues with getting my coasters to be heat proof. It seems the thinner the resin the less heat proof. Are yours heat proof?

[@EdnaWargon]

Yes up to a certain temperature. You have to ask the resin manufacturer, each resin is different.

[@susanmurray7530]

Sound quality is really bad. Can’t hear what you are saying.

[@EdnaWargon]

Yup, this is an old video, I've since changed microphones 😅

[@susanmurray7530]

@@EdnaWargon 👍😊