Resin Ocean: WAVES & LACING Gorgeous EFFECTS! Join us or skip to the end to see the final results!

Members Early Access! Talk-through Ocean for standard size (3.9 inch) coasters. Give your waves lovely 3D effects. Always note that all the layers I do aren't required for 3D effects, and of course you can add more layers if you like.
Ocean coasters are bit more tricky because you are working in such a small space, Always remember you can skip through the video quickly by clicking the next chapter
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
00:00 3D Ocean Resin w/waves and Lacing
00:13 Base Layer (clear and gold)
08:28 Layer 2 (beach wave)
13:29 Layer 3 (add the ocean)
24:05 Layer 4 (Final layer wave/ocean)
30:10 Sand and Prep
30:50 Back of the Coaster
34:27 Member THANKS
36:26 Finished!
I am an Amazon associate; I receive commissions from the qualifying links to amazon listed below:
gold mix (for sand/beach):
Mehron Makeup Power (metallic powder)
Gold: amzn.to/31XBsQ3
and (Mica powder)
Bling it gold: amzn.to/32DoEyp
WHITE (mixture of Castin’ craft with a 4-6 drops of the alcohol ink):
Castin Craft white: amzn.to/3e0MYfB
Alcohol ink white: amzn.to/38ttAGZ
Ocean colors:
Ultramarine blue by liquitex acrylic paint: amzn.to/3e7GtId
Phthalo green by artist’s loft acrylic paint: amzn.to/38uI61q
Pebeo Studios 358: Iridescent Green Blue: amzn.to/3e0xRFF
Cobalt turquoise Hue by decoArt acrylic paint: amzn.to/3f5HJg4
Glow mix: Combined to make this soft hue of teal:
Phosphorescent green - glow in the dark by Golden acrylics: amzn.to/3e1j4aY
(One drop of) Dr. Ph Martin’s TEAL ink: amzn.to/31Ro3ZL
(A pinch of) interference green pearl ex powder pigment: amzn.to/31HvToF
Coaster Bottoms:
Coaster Cork bottoms (regular size): amzn.to/2ZFG6iC
(this is just link where I found them - you may have a better idea)
Coaster molds:
3.9 inch: amzn.to/31HJ2hr
Typical tools I use:
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
1. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
2. Heat gun - Green version: amzn.to/3uhkuaa
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
I used Pro-Marine Resin on this project, here are the typical resins I use:
KS Resin: amzn.to/3iyjc5h
Pro-Marine: amzn.to/2Z1n2wd
The Epoxy resin Store: amzn.to/2BE1NHY
MiraKleer Table Top: amzn.to/2Zl9ziR
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu

[@m.c.5124]

I’m so shy anyone who shares their talents like you do are hero’s. I dont think you stutter as much as you think you do. At least you are kind. Happy trails. 💖

[@barnabascollins4625]

Great video! Don’t ever feel self conscious, we’re all hear to learn and support one another 💜.

[@irenerhynes6732]

Thank you, I like that you show us newby resiners all your coasters.

[@markcummings9226]

You are so brave to work on overcoming your insecurities and sharing your talent with us! I did not notice a stutter at all. It is wonderful to hear your thought processes as you are working. Keep up the good work!

[@miniscenesgb]

I had no idea that acrylic paint would work so well in resin. Wonderful coasters, and a great tutorial, thank you

[@SassieNewf]

I don't believe I've ever heard you stutter, and if I did, I just passed right by it, to get what I'm here for. YOU and your wisdom, and beautiful creations!!! Keep em coming hon. Your work is so beautiful :)

[@teesor314]

I began my resin art a few weeks ago and it's been a steep and sometimes costly learning curve, but YOU have cleared up so much for me!! Thank you so much you are so relatable! Your art is so beautiful!!!

[@Debster1955]

Wow…these are absolutely gorgeous. Videos are always better with narration and visual. Don’t be so hard on yourself, we all have flaws and to be honest I heard no stuttering. You were perfect.

[@peggyburnett6331]

I haven’t noticed that you stutter, and I love having you describe every step. That’s how I learn. You do a great job! I watch a lot of these videos, and yours is one of the most pleasurable to watch.

[@bevotto8279]

Bev here. Thank you so much for talking and explaining how you do things and why you do it. It helps a lot. Never knew you could do these things with resin.

[@kellyjean4981]

The colours on these coaster are calming and vibrant at the same time. Love them Also, I have been on a marathon of your videos. You are one of my favorite resin artists. I love listening to your calm soft voice. I never would have thought that adding the voice instructions were a challenge for you, but good for you for pushing yourself!

[@KeptForJesus]

Thank you for sharing, for being open and willing to be vulnerable. Your creativity is a gift from God.

[@ellenheinzle7473]

LOVE your work. Don't stop doing 'talkies', you have a pleasant voice and give great instructions! Since I'm new at resin I need all the help I can get! Thank you so much for sharing your process!

[@mookzmom]

Really love the "talkies". The whys and your thoughts are so valuable. Another beauty for the hit parade here! And thank you for uploading during this week, when so many creators are taking vacations.❤️

[@Beau-st6yq]

Hi I started watching you and I truly love how you talk us though the process, I personally think your voice and speech is relaxing! Thank you 😊

[@deewilliamson3843]

Your voice is great, and the tutorial is exactly what I needed. Thank you so much! GREAT job!

[@darylpepper2256]

Wish you were still making videos, just found yours and you are an amazing teacher. Thank you.

[@Msjay77]

Thank you for this video. Your stutter isn’t that noticeable. My husbands is extremely bad when he’s nervous but you did great. Lovely coasters. I’m only on UV resin level. But one day I hope to get out from my comfort zone and try these out? Love your work.

[@kristybollmann870]

Wow amazing layering job! Looks like God made those waters himself!

[@atomicredhead]

THANK YOU so much. Absolutely enjoy watching and learning step by step. Your work is stunning. So glad you decided to talk through the tutorial, it helps so much. I'm excited for more content.

[@anitadolen3497]

Wow! Thank you for sharing your thoughts while creating. I have started using resin this year so I still very new to it but I am loving it. These came out absolutely beautiful! Thank you for what you do. 💜

[@vangiefich]

I love these coasters! I want to try these! Thank you for great instruction!!

[@stephaniedavey]

My dea girl, I just watched this one and trust me I am do enthralled with your work I had no awareness of any stutter - what stutter!!! You might like to know I have a very keen ear. Your work is wonderful and your info invaluable, thank you do very much. Another Aussie.

[@pamlongwell8727]

Gorgeous artwork!

[@margueritewhite3038]

You are doing a great job and are a very good teacher!! Thank you!

[@tinacollett6844]

You do a great job. I enjoy watching what you do

[@medicmark9683]

Absolutely beautiful I wish I had 10% of your talent, I’m just starting out with this stuff and you’re helping tons.

[@ruthmerigault4982]

Thanks a lot for the explanation.it's so clear.

[@gingershock]

Soo beautiful!!

[@nancysepic]

Beautiful! Excellent tutorial!!!!

[@peggyburnett6331]

No worries. You did a great job!

[@dianescraftycreations]

Beautiful!

[@PosidenSiren]

Brilliant, thank you for sharing ❤

[@jeaniebrown8119]

Love the layers!❤

[@amyg2385]

Those are beautiful! I'm just getting started in resin. Thank you for sharing!

[@music77100]

Beautiful... I am definitely making these.❤

[@TrackerLorna]

Awesome luv the colours 🥰🥰

[@music77100]

You are a very genuine artist. Love your videos. A lot of respect, love and positive vibes to you. ❤

[@ritashea5311]

This was a wonderful tutorial! Many people stutter, incidentally, including a couple of US presidents…don’t ever let that stop you from doing anything! Your creative spirit shines through all of your videos, and I reallly appreciate the time you take to do them!!! Thanks! 💙💜💚♥️💕🧡🖤

[@deannaashworth9008]

Your doing great. Love your work

[@kris_kreations]

I always learn so much from you. Thank you for that. I’m sorry I was so late in joining, I will have to watch the repeat.

[@PennyTailsupStories]

Woohoo!! Early access!! 💕🥰

[@kellyjean4981]

I know that I have commented previously on this video, but I am in the process of making these for my mom, following your amazing tutorial. I can’t get the cells for the life of me, and I will probably end up using 70$ worth of resin for coasters and a tray, but I am so excited to see the results. I have to say, after attempting these for myself, I want everyone to know how very skilled you are!!! These are not easy 🤣

[@janicehelmore-pouringwithf3360]

Again beautiful as always! 💖💖💖👏👏👏🇦🇺

[@b.deidrabrown7402]

I am thrilled to have found your video channel today. I'm binge-watching...LOL! You are giving me so much confidence to broaden my horizons and dare to try something new. Flaws and all. Can't wait to get started. I was so focused on your hands while listening to your voice and taking notes. I have a short-term memory recall so I HAVE to concentrate and write everything down. I still didn't notice a stutter. I just thought you had a very soft voice so I concentrated on that only. Thank you again for your videos. Looking forward to learning so much more!

[@lindatscott]

Outstanding

[@brianpingel738]

Your coasters are beautiful. Do you have a video of your techniques of sanding and final clear Without molds. Thanks again, hope to hear from you.

[@victoriatrestrail]

Fabulous ❤

[@marlenedean1569]

Thank you so much. I am new to this and am learning so much from you! I love your videos ❤

[@lauriehunecke9509]

Beautiful

[@sparky6020]

Thank for this video. Very informative. And you talk fine. 👍🏻And beautiful coasters

[@stankrieger3598]

Love your video, never thought about casters. I like this because you come across as a nice human and mot just a promotor of sales.

[@MrRenoman2011]

Well done. never heard a stutter great job

[@amuunscraft2943]

Thank you 💜

[@harshasharma8066]

Wow.... amazing....I will definitely try this.... lots of love ❤️ from INDIA

[@susanfitzpatrick4978]

I’d like to know you had mentioned sanding resin? I’m confused as to what you do with this sanding resin that you put on top. Also, how long do you wait for your coasters to fully cure before someone can put a hot cup of coffee or a hot mug on the coaster? Your tutorial is beautiful very clear, and easy to understand. And I thank you so much for your time.

[@ResinAsYouWish]

hi, here is my video explanation: kzbin.info/www/bejne/h4vdqHqlaL2Ioas

[@lauraleamarlyn323]

you're doing a great job!!

[@michele3051]

C'est vraiment magnifique ❤❤

[@redcorvettegrani]

loved your video!

[@maryjofrey1184]

This is awesome. I really appreciate when you talk through the steps, I just today discovered this resin "art" and am anxious to try it, and this made things clear for me after watching several others. Because I am a beginner, I didn't catch the sanding and final clear coating method. If you redo a clip if you could add that it would help. You did an awesome job and I didn't catch a stutter at all!! Thanks for sharing.

[@wittnessbe_judged8723]

You do beautiful work, the coasters are a work of art within themselves. I can't wait to give my company one of your coasters to sit their drinks on. I know I'm going to get a lot of compliments. However, I have a question for you? We didn't get to see you remove your coasters from their molds. Could you please make a video showing us how to remove them from the molds? Do you have to sand them after you take them out of their molds? I loved everything about you. I can't wait to learn more about you, along with your creative ideas. Thank you. for taking the time to share these excellent ideas for a lovely gift idea. I want to tell you that you have earned yourself a new subscriber. You are correct, I used to have a slight stutter, the more you talk, the better it helps you. I still stutter here and there, but I feel more confident.

[@esthermichel7433]

Thank you for doing this video and walking us through it is very helpful maybe you can do more videos about do's and don'ts I would really appreciate it tk's hun💖

[@jojocool555]

Amazing tutorials. x

[@Boatto141]

Good job.

[@jeanniewicks7264]

They are very nice

[@janilledutton139]

Jaw-dropping gorgeous!! Thank you for sharing your process! I'm curious about your molds and how they withstand so much heat. I've had to toss several molds because I used hardly any heat, and yet it caused the resin to fuse to the molds!

[@jadeswrapsandbraids]

I've always been scared to try ocean waves. Afraid it won't turn out right. I will follow this video and hope and pray for the best,

[@celticwarrior777]

Actually looks better staggering layers more 3 D they look great

[@EmbraceTheChakra]

gorgeous beautiful concept, but probably wouldnt do so many when doing a video, takes ages waiting for the next step

[@kim99may]

It is so hard to create sand and resin coasters and a mold I love the gold alternative as a layer on the bottom!

[@nenascakeshomemadegoods6127]

Just beautiful 🤩 they look amazing great job by the way new subscriber here ❤👍🏼

[@PaiPraTodaObra1]

Seria interessante você ativar as legendas automáticas do KZbin em seus vídeos para que brasileiros como eu que não sabe inglês poder ler as legendas e entender o que você está falando.

[@sherimitchell7404]

So, with other artists I've seen, the resin is much thinner. Why is yours so thick? Is it a preference or what? (Hope I don't sound rude, I am definitely not, lol) beautiful work, btw. I'm just getting started in resin art. I've only applied it as a top coat to my paintings so far. TY for taking the time to teach us and answer questions 😊

[@littlebella6984]

Absolutely gorgeous! First time seeing your videos. Subscribe to your channel

[@durindaau8085]

These coasters are wonderful. I have been doing resin for about a month now. Learn something new from every video. When and why do you put tape on the back of the coasters? Love your Chanel.

[@voncieletaylor8621]

Could you put tiny shells in the sand before the last clear coat?

[@d.debellis5091]

Oh wow ! This as great ! Question- If I use acrylic paint - which I'd prefer - does the opacity play a big role in this type of resin art ? I've only worked with resin on my finished coasters, I'm a total Newbie to Resin Art. Thanks for the video !!!

[@marshaschenkel6438]

I love your tutorials. Thank you. You are so detailed. I do find your a bit harder to hear. I don’t know if you’re just very soft spoken or your speaker is turned down. Love this. ❤️

[@ResinAsYouWish]

hi, I will work on it, I use my phone and I"m speaking pretty close to it, so I need to find something better - thanks for the feedback - a couple people have let me know

[@maryjofrey1184]

This looks like something you could do with a paint pouring technique!

[@colleenpalmer2373]

U speak n do well ❤😊

[@elizabethboffoli913]

Hello, I love your videos. Please don’t be self conscious I think you are doing fine .. I just came across you while trying to find out if you can use actual shells and Rick/ crystals or even fossils .. Your coasters caught my eye .. so very realistic.. I enjoyed how softly you speak .. I’m vet happy to find your channel . Thank you .. Liz ( estcstkittie ) 😉😘

[@garydeandeery]

I want to make some too I’m a diamond driller at my day job And did some granite marble steps so Iv kept the cores about 80mm dia was going to cut them thin like a coaster then resin design on one side

[@mama8691]

The only issue I had with this video is the fact that your molds aren't clean for this project 😅😂 the whole time I was like " OK, yea, * writes down notes...* now when are you going to clean your molds" ❤ beautiful work

[@emilyfrangipane2514]

Your work is beautiful!! Im just starting out and have a question. Im so confused with which colorants to use. This recipe calls for alcohol ink.....Is it safe to heat up the alcohol ink? Can I use a hairdryer or do I need to use a torch and a heat gun?

[@abbottsmom]

Love these. Where do you get the boxes?

[@serenityartist]

What kind of resin do you use. There are so many! 😮

[@DebbieStephens874]

Hi, I’m watching and am curious.. what kind of resin are you using. It looks very thick. I always like to try new things.

[@margaretkeay97]

Hi there from Australia! 🇦🇺 Down Under. 🌏 I just found your channel and I'm sooo excited that I did. 😀 Ohhhh, I just love your work, it's so beautiful. Hey don't let your stutter "ever" stop you doing what you love. To be honest, I barely noticed it and if anyone out there berates you for it, they don't deserve to have access to your channel. Good on you for getting out there and sharing your wonderful talents with us all. Keep up your marvelous tutorials! 😀😁🤗❤️

[@ResinAsYouWish]

Thank you and welcome!

[@jillclay936]

i didnt even notice. too busy loving the vid. got to say though, your resin seems mighty thick?

[@ResinAsYouWish]

@@jillclay936 do you mean the viscosity?

[@jillclay936]

I do. Initially it always seems almost lumpy for want of a better word. Your stuff is fabulous. And mate you have no worries about how you come across. Stop worrying and resin xxx Jill (UK)

[@SassieNewf]

@@jillclay936 Was wondering the same thing.

[@christinagrimes6547]

So, I am trying to make a very small "ocean waves with the white tops" like yours but very very small. You know the clip-on badge holders that can retract? I wanted to make that ocean scene on something that small. I tried to make the lace waves, but it turned out kinda' ombre' from dark blue to white. Didn't look good.

[@dalialovesdoggies4361]

This resin looks very thick. Is that ok? What is the difference between a heat gun and a hair dryer when making coasters?

[@ruthwest3280]

I have been doing resin for a pretty long time and I must say, I truly enjoy your tutorials. I can relate to the way in which you resin. Thank you. And how do I become a member?

[@ResinAsYouWish]

Thank you! I believe you can only become a member on KZbin if you’re on a PC - don’t know why that is - probably because it would be easy to bump the member button and not realize

[@rechellethackray]

Could you please tell me the ratio of resin to castin craft, I have tried and tried and just cannot get any lacing, even after doing the steps you have shown. Please please help. Xo

[@jennawolf9873]

❤❤❤

[@Mdb2016]

My colors just run together and I can’t get as defines white lines. Any ideas??

[@celticwarrior777]

Do you sand between layers?

[@yonaramarinafrancisco8233]

𝑂ℎℎℎ 𝑡ℎ𝑎𝑛𝑘𝑠. ❤❤❤

[@serenityartist]

Is that a heat gun? What kind and where do you find it

[@basketfullofholes9867]

On your final step, did you get that rounded edge by pouring clear resin onto the top and then sides of the coaster? That way they aren’t flat?

[@ResinAsYouWish]

Hi, I sand the edges - then do a flood coat

[@judyferry8473]

How can I buy your ocean wave coasters??? They are Gorgeous!.

[@marcoschileni1834]

Ciao che resina mi consigli ??? Più densa? Hai il link?grazie

[@dalialovesdoggies4361]

What creates the lacing?