ResMed AirFit™ P10 - Fitting your nasal pillows mask

[@jcrocks6698]

Thanks for the video. I called for a sleep study in August. They can't get me in until February. Someone I knew stopped using their machine, so I got it from them and bought replacement parts online. I wasn't sure how to hook up the mask, so this helped. I would wait for a prescription, but I'm literally smothering to death every night.

[@anastunya]

Pressure might be too high or humidity off. Machine set on someone else’s settings.

[@InezThompson-bf1uk]

Do not want this mask

[@bg4406]

What machine did you get, Cpap, Bipap, or apap? Type of machine makes a difference, I have apap And it’s worked better than Cpap or Bipap and you can easily easily hack the settings to play with different settings to see which works best for you

[@CarnivoreNomad]

When I first started using my ResMed machine, I was giving a Nasal Mask... well the cup was leaving a little cut under my nose that was uncomfortable, so I went back after about 3 weeks to see if I could get something different, and was recommended to use the Nasal Pillows, they gave me two sizes to try (Medium and Large) and BOTH of them make me wake up feeling like I was punched in my nose repeatedly overnight. The little, hard plastic piece on the front of the piece for exhaling just presses on my nose ALL NIGHT LONG, not matter what I did to try and adjust it. So, I just went back to my Nasal Mask and will deal with it leaving the little cut under my nose for now. Hopefully it will callus up and not be an issue anymore

[@andrewpersaud4144]

.....You're supposed to loosen the strap. The P10 is one of the best masks you can get. It fits nice and snug without needing to be tight.

[@swanval38]

This is the best, by far, mask I’ve used in nearly 20 years of CPAP use. However, the cloth straps that go around the head are not slid onto the metal arms, and insurance companies, including Medicare, will only provide the cloth straps in very long intervals. You can get the metal arms, which includes the bed for the pillows, on a much closer schedule. You get the “frame”, and you then must figure how to remove the strap from the old arms, and then you must thread it onto the new arms. This is a lousy part, and ResMed should work with the insurance companies and Medicare to get the strap replaced in a more timely manner.

[@hiphopweimer]

I agree putting this together in a stable way is not obvious

[@joethames4303]

The head strap is getting about 10-15 days before it is stretched out and comes off in my sleep and I have to wake up put it back on several times during the night. some nights I do not get much sleep

[@danielsteele3853]

I agree they're hopeless

[@danvelgtr]

Used my Pillow mask for the 1st time last night . Felt really good when I woke up . Wondering why the API reading was very very high though ??

[@davidslack9516]

Started with a medium-size Airfit P10. The inner lining is a hard plastic that started stabbing the inner edge of my nose which created visible sore spots. I'm temporarily switching to a nose mask to let the inner edge of my nose heal and then I'm going to try the large size P10 nose pillows to see if it keeps the sharp inner portion from stabbing me. People say that these nose pillows are supposed to rest on your nostrils and not protrude too deeply, which apparently causes irritation from the hard inner lining's sharp edge. I hope this works. If it does, great. If it doesn't then this is a poorly designed product if it does more harm than good.

[@anastunya]

Consult your respiratory care provider for problems. The 877 number they gave me for on call sleep team only provides a clerk. If you can’t get through to them, call your respiratory care provider.

[@SpaceExplorer31]

I breath in and out through my nose and I can’t breath out unles I open my mouth? WTH?

[@badlilstang]

I can't get this comfortable for use. Puts too much pressure on my nose.

[@jennmooney]

My problrm is I don't seem to fall asleep at all anymore when I wear the P10 I did fall asleep having a nap one day and was so excited but at night time I find it easy to inhale but hard to breath out- Is that normal- am I overthinking it.? I try to sleep but can''t. I feel if I fell asleep for one night and didn't suffocate that I'd be fine , I'm sure its a confidience and trust thing. It would be great if the holes were bigger but am guessing its the resistance to the force of the air on exhaling that makes the whole thing work. Any thoughts Id be happy to hear. Thanks

[@geneleckness2686]

I just received mine a week ago so I have no answer but I have the same problem. It is scary.

[@barbarabessey7234]

I am having same problem too. - Would like to know how to resolve it. Does anyone who knows what to do answer these posts?

[@davidinmd712]

@@barbarabessey7234 Return it.

[@bg4406]

This mask was horrendous for me because of 2 issues, first one it is uncomfortable on mustache area, the other issue which was major is that it does not have any pressure relief most mask have a small hole somewhere this one did not have a a small holes or vent, woke up miserable after only. 1 hour of use, I woke up and took it off went back to the respironics dreamwear nasal pillows.

[@lauriemoriarty6479]

I also can’t breathe because of the mask. And now I got the pillows but the one they gave me doesn’t actually have pillows in it just a whole so the air comes out too quickly and suffocate me. I’m ready to stop using it too. It’s really frustrating because I used to have one years ago with nasal tubes that didn’t blow to much air in my face. Tried 3 different masks already and can’t breathe with any of them. 😪. How do I get HELP???

[@ResMed]

Hi Laurie, Your medical equipment supplier is your best resource for any setup, adjustments, or troubleshooting you might need with your machine, mask, or other CPAP equipment. After discussing the issues you're experiencing with them, they can help you find a mask style or model that may work better for you or they can offer adjustments to your machine settings such as AutoRamp, which starts your therapy at a lower pressure to help you fall asleep more easily, before gradually ramping up to your prescribed settings. More info on that is available here: bit.ly/486UouX You may also want to discuss this with your doctor if you feel your air pressure settings are too high.

[@thecomidicpenguin]

how can you tell if the pillows are fitting well?

[@ResMed]

Thank you for asking! The P10 should feel like it is “designed to fit” your nose, the nasal pillows should not go in, and the spacing of the pillows should pretty close to exactly match the spacing of your nostrils. If you feel the fit may not be ideal, you can try another size or reach out to your medical equipment supplier for an in-person fitting.

[@RaymondLopez-zo7er]

What do all of us users who feel like we can’t breathe out through our nose need to do? I just got mine yesterday and had the same problem. Very scary experience

[@stevenpadin-aquinop.e.154]

I got this months ago and stopped using it after 2 days because I was unable to breath. Anyone else had the same problem?

[@tinagoof]

Day 3... seems ok so far but provider said if you breath out of your mouth it may make it hard to breathe. You can get a chin strap.

[@SAMAYAIR1]

Yes! I can't breathe we didn't either on my face or in my nose if you mess around and open your mouth ears sucks your mouth closed and I don't like nothing on my face while I'm sleep is hard for me to sleep and the band gives me a headache because it's over my head it's not comfortable but every time I do my physical with my job once a year I'd ride the city bus I have to do a up to date 30 day print out which I hate

[@SAMAYAIR1]

Excuse my typos I was doing the talk to text and of course the talk to text is always printing out words that it wants to print out

[@jeffj318]

Depends on what machine you are using. CPAP, APAP, BIPAP?

[@anastunya]

Need to a call them about adjusting

[@malcolmjordan6741]

I agree I can barely breathe through my nose I applied p10 as well as another mask and I can barely breathe without and worst with machine my chest instantly stared hurting like a seven out of ten felt like it was caving in also was hurting to breathe hard to catch my breath

[@ResMed]

You may find the Ramp feature on your machine helpful in this case. It's designed to make therapy more comfortable by setting the machine to a lower pressure than you've been prescribed and then slowly ramping up to the full prescribed therapy pressure. Using this feature should allow you more time to comfortably fall asleep. We'd always recommend discussing talking with your doctor before making any changes to your settings. They may also have some suggestions for additional ways you can improve your comfort and adjust to CPAP without reducing the effectiveness of the therapy itself.

[@elsquatcho8057]

Can you sleep with it for shoulder sleepers

[@ResMed]

While this could be a good option for those who sleep on their side or shoulders, we strongly recommend discussing this with your doctor and DME supplier who have a better understanding of your clinical needs and can provide you with the best potential options for you.

[@bellacashew]

so what happens if you start trying to breath out of mouth when you are sleeping, does breath get cut off?

[@ResMed]

Hi Gigi, Thanks for reaching out! Breathing through your mouth while using a nasal or pillows mask isn't dangerous but can reduce the effectiveness of your PAP therapy and result in discomfort, dry mouth, and poor sleep. It may also register on your device as a mask leak. We do have chin restraints available but if your mouth breathing becomes persistent, it may be worth looking into a full-face mask for your PAP therapy. We always recommend discussing any adjustments to your therapy with your doctor. Thank you, ResMed Customer Care

[@americanveteran615]

Then your mouth will get really dry and you will start to choke...

[@barbarabessey7234]

@@ResMed I have always, my whole life, been a mouth breather. - But I cannot tolerate anything over my head or mouth or nose. Wanted the Airfit P10 because it was less restrictive, but it plugs my nose, I can't breathe, I feel like I am suffocating, and I was looking forward to a better night's sleep, but it was actually worse. Don't know what to do.

[@itsonlyapapermoon61]

No mouth breathing

[@adamopez5815]

The nasal pillow masks are not as reliable as nasal masks (covering your entire nose). Those masks have tightening straps and cannot move around as much as nasal pillows. I do not understand why they do not make proper straps for the nasal pillow masks.

[@andrewpersaud4144]

I don't move in my sleep, so prefer a light weight mask like the P10. Every end user is different that's why they make various masks. If you prefer the full nose nasal mask, then go with that. That doesn't mean the other ones aren't "proper". I personally despise the mask you prefer, for example.

[@badgumby9544]

Don't use a mask were the hose hangs down. Use one that has the hose on top of your head. If you change sleeping positions a lot while sleeping. A hose that hangs down will loosen or pull your mask off.

[@iSheree]

I prefer it actually. I use a hose holder to hold my hose away from my body. I move a lot in my sleep and sleep on my sides.

[@josuesantiago9844]

Does size letter of the fix fit p10 mask for facing up or down

[@ranatlas]

I'm not entirely sure what you're asking but I will try to answer. When you put on the P10 nasal pillows, you should have the side with the size letter (S, M, L, XL) facing you. Depending on your sleeping position, that side would face different places. If you sleep on your back, for example, that side would be facing down or actually at a slight angle down but definitely not up. I hope this makes sense.

[@anastunya]

The size faces downward when you have it on. Note there are small letters L and R on the pillow.

[@jojojojojojo7728]

I find it tugs on my nose and pushes it up as i turn during the night

[@ResMed]

I'm sorry to hear about the discomfort you're experiencing with your mask. While the pulling and discomfort may be related to your mask size or fit, please discuss this with your medical equipment supplier, who can assist you directly with determining what the source cause might be and can help you find a solution that can improve your comfort without negatively affecting the efficacy of your treatment. Thank you for taking the time to reach out to us.

[@greg4367]

had used these masks for years. They used to have problem with the elastic stretching to the point where they needed to be replaced. ResMed "improved" the design with an adjustable strap. Good idea, lousy implementation. I have now had three units fail (just out of their 30-day warranty) where the elastic joins the plastic adjuster. One unit fail after only 4 night's use. This used to be a great product, now it is a total waste of money.

[@geneleckness2686]

What to do about dry mouth?

[@ResMed]

Hi Gene, This blog post and video may help give you some insights into what can cause dry mouth and how to resolve it. Here is the link: www.resmed.com/en-us/sleep-apnea/sleep-blog/why-is-my-mouth-so-dry-when-i-wake-up/ If these are not helpful, please discuss your dry mouth issue with your doctor for further care. Thanks!

[@johnpereira5504]

You may need a chip strap to keep your mouth shut (no offence). I have the same problem.

[@maphi1947]

The six foot heated hose is heavy and somewhat rigid. Because of the weak elasticity and poor locations of the nasal pillow straps, the heavy hose pulls the nasal pillows mask off my face if I turn my head just a little bit. ResMed used to test its products before offering them for sale. It's obvious that these weren't tested properly.

[@daestridge]

Get something to attach it to the corner of your sheet to support the weight. Problem solved. I use a little velcro strap that has a clip on it.

[@Lola.004]

D E Hi there. Can you give me a bit more detail of the Velcro strap and clip? Does the clip(what type ?), secure Velcro to sheet and the Velcro wraps around hose? I can’t take it when the hose pulls the pillow from my nose with the slightest movement. Tucking it under my arm feels uncomfortable. I would appreciate any help because I am fussing with the darn hose all night.

[@daestridge]

Lola M. Go to google and search for cpap hose clip. I would link to it but KZbin won’t let me. It is just a Velcro strap that goes around the tube and through itself and has a clip on it.

[@Lola.004]

D E thanks so much.

[@johnpereira5504]

I purchased a vertical "tower" to hold my CPAP hose in place. The base fits under your mattress to hold it in place. The "tower" fits between the mattress and head board of your bed. The tower is over your head allowing movement without contact with the hose.

[@barbarabessey7234]

How do I exhale when using this??? I feel like I am suffocating

[@Linda-yn1dl]

I am a new user also--have been using PAP therapy for about a month. The mask may be too large for you if you feel like you are suffocating. I felt that way at first, but then tried a smaller one and did better. I am using the AirFit P10 for her--in extra small. Possibly the mask isn't the right size for you. The medical equipment company really didn't help with that at all, so I have been on my own to figure this out.

[@jcrocks6698]

Your pressure may be too high. Hold the home and round button together at the same time for 5 seconds to go into your settings and adjust the pressure.

[@willnottsubmitt3514]

Has rubbed the inside of my nose raw

[@ResMed]

Thanks for reaching out and sharing your experience with the AirFit P10 and we regret to hear about the dryness and irritation you've experienced. Irritation like this can result from several factors, including cleaning method, frequency of cleaning, or even allergies. Please contact your healthcare provider or doctor to discuss solutions for other potential causes of irritation right away. Please review the recommended cleaning instructions and guidelines on pages 5 & 6 of your P10 User Guide here: www.resmed.com/au/dam/documents/products/Mask/airfit-p10/user-guide/airfit-p10-airfit-p10-for-her_user-guide_apac_eng.pdf. You can also find additional information on the Caring for your equipment page of our website here: www.resmed.com/us/en/consumer/support/treatment-and-maintenance/caring-for-your-equipment.html. Thanks, ResMed Customer Care

[@ChrisPenner-s5r]

September 2024 anyone?

[@americanveteran615]

I been using this for over a year..

[@synthsol5522]

Lol

[@Mausedar]

I miss Swift FX, come back this model pls, P10 it's a bad product. Cartilage in your nose hurts or the strap is loose.

[@etynassi4195]

Thank you

[@Mari-uy8bj]

The head strap is made out of very cheap material.

[@joymorrison6614]

Yes it stretches out in no time at all and looses its shape

[@smallnuts2]

@@joymorrison6614 having the same issue. Thetes no way to tighten it.

[@joymorrison6614]

@@smallnuts2 I'm gonna figure out how to make my own headgear thatll last longer.

[@chrisbob2650]

@@smallnuts2 There is a way to tighen them. There are the little plastic fastener. But I find them little help. www.easybreathe.com/-p4595.html?gclid=Cj0KCQjwvdXpBRCoARIsAMJSKqLf85rA7_esrpEZ7N_TuPBJ-yTWnemTMppAJTqmQyPTIuRYd2oWKBkaAvPxEALw_wcB

[@francineracette9183]

Français

[@francineracette9183]

SVP en Français merci

[@francineracette9183]

SVP en Français merci

[@InezThompson-bf1uk]

Don't want this mask