Ventilator Settings Explained (Mechanical Ventilation Modes Made Easy)

[@RespiratoryTherapyZone]

💥 Ventilator Settings [Full Guide] ➜ ➜ ➜ bit.ly/2KMrNle 💥 Ventilator Modes [Full Guide] ➜ ➜ ➜ bit.ly/2Rtlgjo 💥 Ventilator Modes [VIDEO] ➜ ➜ ➜ kzbin.info/www/bejne/aXqcpZuOmstroJI

[@preciousmotlhagodi960]

Powerful videos... Thank you so mu h u are the best👌

[@manuelapagarigan1525]

@@preciousmotlhagodi960 ôqq

[@sugunathulasingam932]

@@preciousmotlhagodi960 @#$c

[@edswin1597]

May

[@liknawkebede3082]

Liknaw

[@neilrivera4194]

Thank You! I'm a clinical instructor and you saved me hours of making a proper lesson plan about this topic

[@joaoangelopurisima2160]

As a vent application specialist, your channel helped me a lot in my presentations! Keep up the excellent job ur doing Breathe ez my friend

[@lifeofmedical129]

It help me more for studies

[@ImperfectMasterpiece]

LOVE your videos!! They're extremely helpful for my classes, thank you and keep it up!!

[@isabellajefferson5544]

/ q

[@mjd9412]

Mechanical Ventilation 101 Notes Ventilator Settings ( What it is = Ventilator settings are the inputs on a mechanical ventilatior that can be set or adjusted based on the support needed by the pt. This support is given through the form of oxygenation and ventilation) Primary Ventilator Settings 1.) Ventilator Mode (What it is= Ventilator Mode is how the vent assists pt with ventilation) (Main Modes = Assist/Control,used when full assistance is needed and SIMV,used when only partial support is needed) 2.) Tidal Volume (What is it = The amount of air that is delivered to the lungs by the machine) (Normal Starting Values= 5 to 10 l/min or 6 to 8 l/min of the pts ideal body weight) 3.) Frequency (What is it = Respiratory Rate,number of breaths taken per minute) (Normal Intia Range =10 to 20 breathes per minutes) 4.) FIO2 (What is it= The concentration of oxygen being Inhaled by the pt.) (Normal Inital Range = 30% to 60%) 5.) Inspiratory Flow Rate (Inspiratory Flow Rate,how fast a tidal volume is delivered by the vent) (Normal Starting Range= 40 to 60L/min) * Set to low,will result in pt vent dyssynchrony. * Set too high will result in decreased map,mean arterial pressure. 6.) I:E Ratio (What is it= Inspiratory portion compared to the expiratory portion of the cycle) (Normal Values = 1:2 and 1:4) *If you need to change the I:E ratio adjust the inspiratory time,expiratory time,tidal volume,flow rate and frequency) 7.) Sensitivity (What it is=How much effort AKA negative pressure a patient must generate in order to trigger a breath from the machine) (Normal Initial Ranges= -1 and -2 cm of H2O) 8.) PEEP (Positive End Expiratory Pressure,Amount of positive pressure delivered to the pt during the expiratory phase of the cycle) (Normal Inital Pressure = 4-6 cm of H2O) *The most common indication for PEEP is in pts with REFRACTORY HYPOXEMIA and those who have not responded well to high levels of FIO2 9.) Alarms (Common Alarams = 1.) High Pressure 2.) Low Pressure 3.) High PEEP 4.) Low PEEP 5.) APNEA 6.) High Frequency 7.) Low Expired Volume)

[@Assad966]

Clearly and beautifully explained 👍👍👍👍

[@sunithathadikamalla4514]

You are really awesome......I watched so many videos to understand but couldn't but this video made me to understand ....love you really for making such video for medical professionals.... thank you

[@RespiratoryTherapyZone]

💜

[@munalisacademy7354]

Thank you so much ❤😮

[@bepositive1295]

Very nice video... thank you

[@shwethin1230]

Thank you

[@steelrain1313]

many thanks!

[@raymondrelao7032]

thanks .. this subject its hard to be respiratory therapy student

[@ramyabujji5990]

Tnq ....it's very helpful

[@karenmitchell6654]

Thank you was very helpful

[@AIRBUS10]

Hey guys!🤗 I just bumped into your channel!👌 New subscriber here!👌👏👍

[@javierperez5223]

Great video. Thanks!

[@mleski84]

Thank you 😊

[@dr.nazninahmed1361]

Thanku this was really helpful❤

[@percyrosal1391]

Doc hello can i ask favor from you doc suffering from pn im a filipino doc

[@dorothyclary1705]

I would like to get a book for myself to learn about this ventilador where could I get a book to learn thanks 🙏🙏

[@ligisoby5822]

Can you make video for RPSGT exam( polysmnography technologist)

[@Ben-oi4gs]

thanks for sharing

[@evan.norwalkcalifornia562]

🗣Who else is having respiratory problems right now 😞

[@michellezarzoso6653]

This is the best

[@learntoserve3465]

Awesome..dude..👍

[@JROD082384]

Where was PRVC and BiVent in the list of ventilator settings?

[@zebarafique715]

Thanks a lot!very helpful videos

[@colinrobert-kv2up]

Space suit math, venting from helmet, valves, micro pumps on belt ,hoses,link or on helmets.both, underwater gases, math, acupa tanks, a glass cage, air control on bed under it make.

[@schoolshiz4055]

Quick Question, are your normal values the same as the NBRC? I’m trying to study for TMC and CSE.

[@princetinebeauchamps41]

I just fail my first test I need help

[@jayg8441]

His name was Robert Paulson

[@josnamathew1258]

❤

[@guddupatwa7401]

🙏🏻🙏🏻🙏🏻🙏🏻

[@MdIqbal-fu5xp]

hu

[@sinclair657]

Thank you

[@beckyrichards2439]

Thank you