Restoration of a Scotty Cameron Putter - DIY

Scotty Cameron Circa 62 customized with a stabilized hard wood burl insert. Black carbon finish that will age beautifully. In the bag.
Music:
Silent Wood by Purrple Cat | purrplecat.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...
Where The Waves Take Us by Purrple Cat | purrplecat.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...
Dreams Come True by Purrple Cat | purrplecat.com/
Music promoted on www.chosic.com/free-music/all/
Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
creativecommons.org/licenses/...
Missing You by Purrple Cat | purrplecat.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...

[@DesignCo_two4]

Follow my newly created Instagram here where I will be posting all of my golf related content; instagram.com/deus.golf/?igsh=eWc5dDVvajhpc2Vx

[@RickRaisin16]

Another fantastic piece

[@Uwannawatch]

Absolutely Beautiful Bro! The crock pot "double boiler" brilliant! Can't believe I never thought of that! Great video!

[@DesignCo_two4]

The crock pot double boiler is the best tool I own 😄

[@dannybrant6758]

Lovey restoration.

[@JNBTuning]

Great work as always my friend👍🏻

[@16-bit-trip5]

Nice job! The wood insert is pretty cool and i like the finish you put on it.

[@DesignCo_two4]

Thanks!

[@GillyBillman]

Unreal!

[@jacobbishop9574]

What was the process to stamp the lettering into the wood insert? This is fantastic!

[@DesignCo_two4]

Thank-you! I had a local guy laser engrave 'cameron' into the wood.

[@jeromebegany1634]

What was the clear that you brushed the putter with?

[@DesignCo_two4]

Hmm, I didn't brush it with any clear. After bluing I soaked it in penetrating oil? Is that what you're talking about?

[@jeromebegany1634]

It helped when I turned the CC on, it was Cold Blue. What do you think about a torch? I’m trying to restore a studio design 1. First try didn’t go so good.

[@DesignCo_two4]

@jeromebegany1634 torch can look great, as long as you prep it properly. Here's a write up on carbon steel torching that may help you out www.thediygolfer.com/blog/how-to-oven-torch-and-oil-quench-torch-a-putter

[@anon07045]

What do you call the brown tape that you wrapped around the putter grip?

[@DesignCo_two4]

Leather grip tape

[@SamCarterMD]

Is that Scotty nickel plated? It’s hard to believe it came out of the nickel stripper bath that clean if it was.

[@DesignCo_two4]

Yes, it was. Stripped to bare CS. The bath was to remove any remaining nickel plating, or else the bluing would not work well. A lot of the nickel was already removed while buffing.

[@SamCarterMD]

@@DesignCo_two4I’m just getting started but any nickel plated putters I’ve tried to strip (specifically Tear Drops) come out of the bath dark black where any nickel remains, and even after I sand off the black there’s still nickel underneath. How long do you leave it in the bath?

[@SamCarterMD]

@@DesignCo_two4I have a feeling your sandblaster is much better than what I’m using too and that may be getting a lot of it off.

[@DesignCo_two4]

@@SamCarterMD ya i agree, the sandblaster is quite effective