Blacked Out Scotty Cameron

[@jerryneff6018]

Awesome transformation of awesome putters

[@kenmykietowich3625]

Stunning work!! Well done

[@igolf906]

Thank you!

[@JoshMG]

Absolute fire brother! Sick sick sick. That Pro Plat is awesome also!

[@igolf906]

Thanks man!

[@jefferyzielke7665]

Excellent work. Beautiful results

[@igolf906]

Thank you!!

[@lconley8722]

When filling in the letters will acetone take off cerakote or powdercoat when cleaning off excess paint?

[@igolf906]

It won't affect cerakote at all. That's why it is so widely used with putters. But powdercoat is different. I've heard SOME types of powder coat are solvent resistant but, not all of them. Not really educated much with them but that's what I do know.

[@Piercemotorsports]

Amazing stuff! Quick question, when your cleaning up the paint fill over the cerakote, do you use acetone on the wipes/qtip or something less harsh?

[@igolf906]

Just acetone. It won't affect the cerakote.

[@FlagstickPutters]

What do you use to get rid of the excess paint fill??

[@igolf906]

Acetone

[@FlagstickPutters]

@@igolf906 I used a small bit of acetone on my cerakote putter after baking it and it took the cerakote off too…..

[@igolf906]

@timsweeney6224 Something was wrong with your Cerakote process. That's never been an issue for me

[@MarkArnold92660]

Do you use any glue when attaching the face plate or just the screws?

[@igolf906]

I do use some double sided tape but, it's not really needed.

[@jeremyempey6850]

When you say a 18:1 ratio? What else do you mix with?

[@igolf906]

It's a 2 part paint with a hardener

[@tomworboys4038]

Nice work mate, did the larger wheel get right in the gap of the back? Just started doing this myself and unable to get in the gap with mine. 6”

[@igolf906]

No, almost all cavities are done by hand if they are dinged up.

[@stefana4241]

I did my back dots on my scotty , my old ones fell out. It came out pretty good but I have a few really small bubbles in the paint. What is the trick to avoid that

[@igolf906]

Use a thin layer of isopropyl alcohol in the Dots first. If done properly should have nice even flowing paint that's glossy and bubble free. Takes some practice but for Cameron Dots it was a game changer.

[@scootification]

So you had to drill out the stripped screws? Does that mean you had to replace those screws? Where did you get replacements? Thx!

[@igolf906]

McMastercarr

[@scootification]

@@igolf906 thanks! can you share part number or description?

[@Nafy.Gaming]

you are phenomenal. keep up the videos please

[@igolf906]

Thanks a lot! Hope to have another uploaded in the next week or so.

[@tomworboys4038]

Is the small and large wheel the same? I’m looking to change mine, doesn’t seem to do the job. I’m based in the uk and the link in description doesn’t work for my location. Could you recommend another wheel please?

[@igolf906]

Check my newer videos descriptions. Any updated equipment I use should be listed in there. Including different wheels.

[@PuffingPenguin]

Have u try to base coat the red colour with white? So it pops out more?

[@igolf906]

I wanted the red to be darker and more subtle on this one. That's why I used the translucent Tamiya paint. Especially the top with the dots and the sightline. But yes, normally I would either use regular colors, or I would have covered the dots before cerakoting and kept them bright silver before Paintfilling.

[@kenloke4758]

That’s awesome! Is that the same paint finish Scotty cam use?

[@igolf906]

No, Scotty never used Cerakote. I'm assuming all of their current black finish models are PVD or DLC finished which is a highly industrialized process.

[@Rezik.]

@@igolf906 which one holds up longer and which is more durable?

[@igolf906]

@Rezik. Cerakote claims they're more durable than PVD or DLC but I'm not too sure about that. Also have to consider those specialized coatings are usually triple the price as an average cerakote job. The machines used to do them are upwards $100s of thousands of dollars so, not really a diy type thing.

[@FlagstickPutters]

What do you use to secure the milled face back on?

[@igolf906]

3M Vhb tape

[@kennybland2024]

Question, how long do you soak the clubhead in acetone to remove the paint?

[@igolf906]

Usually only takes a few minutes. I'll drop it in and come back in 10 minutes and its pretty loosened up. Sometimes it takes a little more depending on the age of the putter and what not but. I also give it a quick sandblast usually too afterwards to make sure all of the paint is off the putter head.

[@kennybland2024]

@iGolf906 cool thanks, also you say you give it a little sandblast, what media do you use?

[@igolf906]

@@kennybland2024 for that purpose, whatever I have in the cabinet at the time. Usually it's 240 grit glass.

[@texasspangler]

I really like this finish, if I do another putter this will be the way to go...lol

[@igolf906]

Yes, I'm starting to get the feel for this cerakote and it goes on really nice!

[@BiggestHoss]

do you use a 1/4 inch wheel? i have one on mine trying to figure out how to rig it up

[@igolf906]

Are you talking about the convolute wheels?

[@BiggestHoss]

Yea trying to figure out how to rig mine up I have the adapters for the 1/2 inch but can’t figure out how to get something right up to it so it doesent move and is stable

[@igolf906]

@@BiggestHoss if you're talking about the Arbor size. They make reduced bushings. My bench grinder has a 5/8 arbor. So with my 1" arbor wheels, I purchased 1" to 5/8" reduced bushings.

[@BiggestHoss]

@@igolf906 i have the adapters for my 1/2 inch but I’m trying to figure out a way to get it tight and stable do I need bushings more washers that have a bigger hole to fit over the adapters? Do you have any social media I could send you a picture at to show you what I’m talking about?

[@igolf906]

@@BiggestHoss sure. Email me. [e-mail]

[@beveridge1313]

super smooth looking! very nice! i have a Scotty or two maybe you can work on mine too!?

[@igolf906]

Sure. Email me the details.

[@jarheadsimgolf9831]

Do you have to chemically take off that platinum finish? Isn't that a nickel finish or something? Or can you get grind it off?

[@igolf906]

The Newports are just satin finished steel. No coating. But for the Pro Platinums they are nickel plated. I have the setup to nickel plate and strip but, most every Pro Platinum that I've been sent,I've done a cerakote finish on then. So as long as it's prepped properly, doesn't need to be completely stripped.

[@jarheadsimgolf9831]

@@igolf906 oh. Thank you

[@cuanapasaja]

How long it will last

[@igolf906]

When the prep work is done properly, and as long as a headcover is used cerakote is very durable. With anything it will wear eventually especially on the sole. But I've seen people with Cerakoted putters use them for few years and still look new.

[@이승훈-u8z]

what is paint source ?

[@igolf906]

If youre talking the paintfill. I use Testors Enamel. Can't get it at nearly any hobby store. But for the Cerakote (Black) in this case, I get straight from Cerakote.com

[@nolanmetcalf2149]

Can I send in my Scotty to you?

[@igolf906]

Shoot me an email, we can talk about it.

[@nolanmetcalf2149]

@@igolf906 what’s ur email ?

[@igolf906]

@@nolanmetcalf2149 [e-mail]

[@isaiahwayne155]

Can you work on my scotty

[@igolf906]

Email me we can talk about it. Emails in the description

[@isaiahwayne155]

@@igolf906 sounds great

[@rebeccasheikh548]

ρɾσɱσʂɱ