Restoration on another LEVEL - Victorian Era Level

#restoration #Level #victorianera
**Auction ended**
Hey if you want to support me, you can become my patreon or invite me for a virtual beer:
Paypal: paypal.me/NTRBeer
Patreon: / notterriblerestorations
Hey everybody,
In this video I am restoring a very old spirit level. Based on my research I assume the old tools is from the victorian era in england. I found the same model in an online antique store with stamps from london. However, this historical spirit level I'm working on has no visible markings of a manufacturer.
The bubble levels are in different condition. One is broken and the other one is cracked as it turns out later.
The spirit level also has an elongated core hole, which is probably used to align the level towards a fixed point. Happy to learn more about this from you in the comments.
The spirit level was sold to me as a mahagony spirit level and is framed by tarnished brass mounts.
I start the restoration by disassembling everything as always. After I have all the parts in front of me, I first pack the brass parts in a vinegar dough for 48 hours. This dissolves surface contamination and simplifies further processing considerably.
After all the parts have been cleaned, the two support surfaces are ground and given a matte finish to protect the optics from scratches during use. On the other hand, I polish the housing of the lateral bubble and the counter plate to a high gloss. I like this contrast of matt and polished finish a lot.
Then i take care of the wood itself. First, I fill the worn screw holes with mini dowels. I then sand down the roughly applied paint.
I discover some markings under the paint. Contrary to my expectations, however, it is in german.
Since it was common in england for stores or retailers to leave their markings on jewelry and tools, it is quite possible that the spirit level I found online is also a german product that was only sold in england.
Since the natural wood color has faded from the sun, I stain the wood in mahogany reddish brown. I show how to stain in detail.
Then i seal the wood with wood wax.
The total of 17 small screws I sand in a mini tumbler that I quickly build.
Last but not least, I replace the broken bubble levels.
I had to look for replacements for a very long time and found only one store that sells such special sizes made of genuine glass.
So if you are also searching, then have a look here:
messtechnik-mollenkopf.de/sch...
Since the smaller bubble level has markings that don't quite fit into the brass housing and the optics are therefore not perfect, I turn the marking of this dragonfly onto the ground. It is so fully visible. In addition, the brass house of the bubble level is helping with orientation anyways.
This time I tested a "Bernstein Bion Kellerbier", which really scored high.
If you want to suppoert the channel follow the link below.
Patreon: / notterriblerestorations
Here are the links to the tools and equipment I use:
IMPLOTEX 3000 Compressor:
amzn.to/40Xp5iK
Powder Coating Gun:
amzn.to/3XEnXhk
Laser Engraver
amzn.to/3EhzLza
Fein Multimaster MM 700
amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C
amzn.to/3I7Ttyh
Sandblasting Cabinet
420 Liter
amzn.to/3S62o89
350 Liter
amzn.to/3IyPj3V
220 Liter
amzn.to/3IzYMYE
Kamera - Sony AX53
amzn.to/3Kif4XB
Stay healthy
Dr Beer
00:00 - Intro
00:56 - Disassembly I
01:22 - Stop motion
02:00 - Disassembly I
02:38 - Cleaning brass/ Sanding brass
04:54 - Restoring polished brass
08:52 - Restoring Wood
11:10 - How to stain wood
12:45 - Mini DIY rotary tumbler
14:33 - Nickel Plating
15:20 - Replacement bubble levels
16:24 - Beer Test
17:18 - Assembly
19:27 - Leveling a level
21:11 - Results
22:18 - Wrapping it for auction
Music:
Elegant Logo by Free Music | / fm_freemusic
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
Stopmotion:
Ecossaise in E-flat by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Result Scene:
Your Lullaby - Per-Olov Kindgren & The Gaugolon Orchestra
with friendly permission by:
Per-Olov Kindgren kzbin.info/door/DDq...
Jimmy Quango kzbin.info/door/DTh...
and The Gaugolon Orchestra
/ gaugolon .
shindo life codes

[@PureRushXevus]

WARNING: Dad-level pun in title xD

[@kinskifilms]

Dude. I was looking for his "other" level restoration video not realizing the pun. Nice one DAD

[@Ambidexter143]

Another not terrible restoration. You continue to do such good not terrible work.

[@NTRprojects]

Thank you my friend. But I will stick to the channel name 😁

[@pfadiva]

I absolutely loved your little stop-motion of the screws "un-screwing themselves" ! That probably took as long as the whole restoration. Very nicely done, all of it.

[@enigmatube5437]

To use the crosshairs you put the level at the elevation you want, get it level and then look towards the crosshairs from the other end to a stick marked with elevation lines, it’s basically a very simple site level

[@DBKING04020]

This is what I thought as well. A rudimentary transom, site level, pre-laser level, etc…

[@zoisbasis7791]

It's so fun watching your videos. Entertaining but also both educational & calming. Thanks again for your great work 👍👍👍

[@bennerdan]

I'm just binging these videos....without the sound on because my kid is sleeping next to me. Seriously, what a delight. Thanks for sharing.

[@carolinarlc7554]

The screws were brilliant! Not only did they unscrew themselves, but they also lined up behind the scale 🤣. This whole project was exquisite. You, sir, are an artist.

[@isaacnguyen6944]

It seems that the long bore and the target glass are used to align horizontally a distant point (zbs on a wall) with the spirit level ( funny that in german it is a Wasserwaage). Either by looking through it or by projecting a light in the dark. I guess you need your apprentice on the receiving end!

[@NTRprojects]

I think we should rename your account to Isaac Newton. Thank you very much for the explanation

[@troy9327]

Maybe it was used like a type of crude surveyor transit

[@suitov]

This makes a lot of sense!

[@PaganWizard]

@@NTRprojects I completely agree. That piece of glass, with the X pattern (like cross hairs, in the scope of a rifle) on it is actually called a "sight glass". I do not remember what it's intended purpose was, but at least I was able to help identify it for you. Another person commented that it may have been used as a surveyor's transit, and that very well could be the case.

[@dollyhadbraces9361]

@@PaganWizard seems like a common laser level today for say projecting a line for Kitchen cabinets

[@DrRestoration]

I love the stop motion! It is totally underrated and no one realizes the time it takes until you film it yourself. Wonderful job and very satisfying video! 😃 I started a level restoration, but gave up on it… maybe I should try again.

[@jimnaz5267]

i have seen similar crosshair type lenses on high precision milling machines to mark x and y axis level simultaneously . I believe there should be another bubble vial beneath it. you did an impressive job, congrats .

[@awhisperinthewind4253]

love the way you line up the screwheads, a sign of someone who takes pride in their work

[@wdwerker]

My grandfather taught me to “ clock” screws as a sign of craftsmanship and attention to detail.

[@paulsweeney5642]

Never know you to shy away from work. You always go the extra mile. Great to see your work.

[@noads1035]

Excellent! Playground sand is the best polishing agent because of the additional ingredient: cat poop! (Grin)

[@meowwl]

Crosshair window was probably used with another lenticular shaped level tube that's since been lost, as a way to check for perfect vertical, such as one finds on the rear of some drills these days. They'd line up the bit and brace to the level, making sure the bubble was centered in the crosshairs, then drill the hole.

[@rc-daily]

Yep he's missing a bubble level

[@edu-ld9zx]

Good luck with your Channel and i wish you and your Family all the best of the World

[@frankierzucekjr]

Finally a way to watch someone remove several of the same screws that isn't boring lol. The stop motion part was very cool and fun to watch bud

[@taraxacumpratensis1772]

Not only do I admire the perfection of your restoration, but also the creativity and technical finesse of your storytelling. It makes each of your videos a unique piece of art in a double sense!

[@NTRprojects]

Wow, thank you!

[@DrHutOfHandcraft]

Next ‘level’ mate. 😄 Great job, I am really impressed! You always put so much love in your work, it’s really an inspiration ✌🏻

[@Cutter-jx3xj]

Awesome video I love watching and doing restorations

[@koltreagle4704]

The tiny sandblaster is brilliant and hilarious

[@markgoddard2560]

Great restoration.

[@otto17023]

I also like that you mention the smells, gives a greater depth to the viewing experience...

[@double_slime]

ah i was excited to see you try your hand at sealing your own ampoles.

[@benzracer]

I’ll level with you, I think you really got into the spirit on this restoration.

[@NTRprojects]

Nice one

[@georgegunnell6319]

Wonderful. And a special note of gratitude for your closing remark! Peace.

[@twm929]

I really enjoyed your comments throughout the video. As an old brick mason I really like how you restored that remarkable level from the past. Thank you.

[@nurmaybooba]

how elegant it is. Such a beautiful work are art now!

[@nataliecarrington2550]

I really enjoy your videos - they are well made and cool to watch, and you explain the "why" of things so well too! I learn a lot watching your videos - please keep up the great work!

[@denisereginasiega6527]

I'm from Brazil and I love your videos and the quality of your work. Congratulations 👏👏

[@misterpatina]

This was so sweet to watch. Your attention to detail is incredible!

[@NTRprojects]

Hey hey thanks buddy. Hope you had a great weekend. Greetings at home

[@2010Zanoza2]

Beautiful steampunk level, I need it!

[@tombarlow6176]

Excellent restoration of the level beautiful 🎉🎉

[@hatednyc]

Whoa! This is the first resto vid I’ve seen where the antique was broken during the process!

[@Legendary_UA]

Beautiful workmanship

[@shedmanx3640]

Beautifully done mate. Couldn’t ask for a better restoration.

[@ThePneumanicHunter]

Great video! Pro tip from a noob: using a cheap hollow ground flathead screwdriver ground perpendicular to the blade is great for cleaning out the slots of fasteners.

[@erictopp7988]

Wow thank you for showing that stain experiment, I definitely was curious but wouldn't have looked it up lol. Awesome idea with the DIY tumbler too

[@pathallock7868]

Very nice. The case adds the final touch!

[@fasteddy07]

Your trick with the rotating jar of sand is ultra clever! I’m learning a lot! And thanks for providing such useful information in the CC.

[@larsfrandsen2501]

Your confidence and skill levels have sky-rocketed. And the little rotating jar with sand is nothing short of genius, no matter who came up with it. Such a joy to watch!

[@johnconnor555]

Wow,what a wonderful job,you're good ,really good !!! 👍👍👍❤❤❤🙏🙏🙏

[@davidchapman8789]

Really nice job, love old tools, the quality and workmanship that went into making them makes them worth restoring. Good work 👍

[@BB_Chaptsick]

Wonderful restoration, sir! Very nicely done video too.

[@NTRprojects]

Thank you very much!

[@ray_gannon]

Appreciate that all the screw slots are in line. Nice detail!

[@mousey451]

Thank you for the water and wood stain, Learn something new everyday ❤

[@rolengoldslick9053]

good work good sir! i learned something new today

[@kevintedford2550]

You did a top notch job on this restoration and I REALLY love that you explain everything step by step. Keep up the great work and I wait with anticipation for your next video.

[@dormindont1]

Красота! You have gold hands!

[@jlinkels]

Great project and mighty fine video. The screws unscrewing themselves at your command after you applied WD40 was hilarious.

[@otto17023]

Wow, amazing how those screws removed themselves! A fun video... Jan Švankmajer, look out lol!

[@fasteddy07]

I like how you use The Force to get those screws out. Clever!

[@grayukuk]

From he outset I hoped your restoration would be as good as your video? 🤔 It is indeed! 💯 👍👍 An excellent job! 😁 Thank You! 👍👍

[@pamelabraman7217]

Beautiful, love how you see the potential in things others throw away. My Uncle had a bar and he would have approved of how you pour your beers. He always said, "good head of foam adds to the flavor of your beer"

[@davefieldhouse5119]

Loved the beer interlude 🤪

[@charliejames1981]

Your skill on this latest project came out to be beautiful..Plus it's equally awesome box to keep the Victorian leveler in...

[@manderson147]

Wow. This was actually pretty impressive. I was waiting for some craptastic patch, but the fact you actually ordered new glass blown levels… marvelous. Subscribed.

[@DaveyL1954]

Just discovered your channel. An excellent restoration. Keep up the great work. The stop motion was superb, and the clincher.

[@kendrahoffman7949]

The stop motion was so great! That was one of my favorite things in the very first of your videos I ever watched. And the workshop is looking so so good.

[@yt4krist0f]

Thanks for the staining tip!

[@marcuscicero9587]

thorough restoration, fun to watch

[@restorationofdirty]

Beautiful clean restoration project 100%❤️

[@user-cx1wk9dk4i]

Фишка с винтиками в начале видео прикольная 👍

[@rbier40]

Grabby Gabson :D can't stop laughing! I am so proud of you and your work. It's amazing! Thanks for sharing!

[@Macaco_Branco]

Was für eine wunderschöne Wasserwaage und dann noch so toll restauriert! 😍🤩

[@olgaabella2537]

Súper bien restaurado 👍👍👍👍👍👍👍👏👏👏👏 saludos desde Uruguay

[@Jotdotcom]

Nice job, and love the stop motion. My preference would be to shellac the wood before waxing; if you cut the wax back with wire wool you will get the depth of finish you are after.

[@Austeration]

Wow what a beautiful piece 👍

[@itsabughunt6310]

Stunning. Loved the whimsical screws!

[@lofty7180]

only found this channel tonight. I was so impressed with this restoration that I instantly subscribed then spent most of my shift at work watching 19 of your videos ! Long may you keep up the good work

[@martinberazategui]

Maybe you could ask to Mr. Patina to laser engrave the inscription... Just an idea, I like how it is anyway!

[@kathmandoo]

Very nice job.

[@udorechner6846]

Very nice restoration of an old level. The result looks beautiful.

[@Vandal_Savage]

Ooh... That one wonky screw at the end...

[@JavierBonillaC]

Gorgeous man. Loved it.

[@dd1965]

Love the screws alignment 😀 !

[@MissLady-pq4hc]

This is my first time watching your work. Really like what I’ve seen.👍🏼

[@fasteddy07]

The wood piece came out amazing! 🤩

[@Vickie-Bligh]

Beautifully done. That was great finding those identifying marks. Now I need to compliment you on the video & sound. The sounds were perfect and I felt like I was in your shop. I like that. This was a fun restoration. Thanks.

[@NTRprojects]

Hey hey Vickie. Lately I try to give a better overview instead of just close ups. Your comment shows me that it works. Much appreciated feedback

[@dannyhenson3141]

Excellent restoration

[@shawnataylor7998]

A beauty it is! I always enjoy your work and attention to detail. Thanks for sharing.

[@Restorology]

The stop motion was done very well and now I am craving a beer. Well done. 🍻

[@davidcoats1037]

Fantastic restoration on a beautiful old level. Loved the stop motion animation too! 😃👍🏼

[@The_Shiny_Red_Dingus_of_Mingus]

1:25 This brought back a happy memory of my childhood. Watching Bagpuss, with the mice busying themselves, singing "We will fix it. We will mend it..."

[@NTRprojects]

Thanks for sharing 👍

[@ottodydaktyk]

Well done!

[@oddities-whatnot]

Sorry, My Mechanics is the only restoration channel I watch. Now THATS another level.

[@MrHenhei]

Thank you, my OCD was satisfied that you lined up the screw heads (or CDO in alphabetical order)... nice restore :)

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@TgWags69]

I believe that traditionally the vials were set in plaster of paris, not window putty. Putty will likely flow somewhat over time before it hardens completely affecting the calibration.

[@DobryiPastyr]

Beautiful job! Very intresting!

[@JAdams-jx5ek]

Beautifully done.

[@darenwunderlich5906]

Had a Peter Gabriel moment watching this restoration. It was nice. :)

[@janelloyd4332]

Beautiful job, love the fact you placed it in a case to keep it safe.

[@user-ft4vd7ng7h]

Красиво, интересно, со вкусом. Спасибо!!!

[@elizabethwatson71]

I think this is your best one yet! You made that tool look glamorous. That was so well done.

[@SuzanneM7]

So beautiful, the brass just glows ✨

[@GeorgeWMays]

Very cool. I really enjoyed this project. The screw animation was truly clever. Thanks.

[@chrisbuzzard2536]

Beautiful results, fantastic job

[@theprisonernumbersix996]

Magnifique travail , Bravo !

[@jeffwalker7185]

I love the attention to detail - even the screw heads lined up at the end.

[@Dirrock]

Sehr schön, tolle Arbeit!