Restoration Torque Converter Rusty | Restoration gearbox ship old | Restore transmission

[@Restorationandmetal]

Subscribe to the channel if you like this content kzbin.info/www/bejne/mImwaqd3mt6qibc

[@janetowens7288]

I'm impressed. He's managed to grow used transmissions in his garden.

[@d.a1893]

HAHAHAHAHAHAHAH

[@ТельманГамзаев-я6б]

Молодец .....похвально .....руки растут откуда надо .....сам люблю старьё восстанавливать .....какое то умиротворение находит , когда чистишь , моешь и всё в порядок приводишь ......КЛАСС👍👍👍☺☺☺

[@gentium1]

Растение пересадил и полил. Красавчик!

[@Restorationandmetal]

Это замечательная вещь. Это хорошее дерево/.

[@larrypierce2777]

Despite what Hassan Naqvi says it takes patience, persistence, knowledge to pull apart, clean and keep going until the job is done. What I see is excellent for the facility and the tools available to you. You had the right pullers. You step by step pulled it apart. You remembered where the components went back. The important thing is that it works. A lot of folks are jealous of your skills. I understand that you're not in a factory setting. You perform as best as you can and I think you do a fine job. I was an aircraft electrician in the US Air Force and your quality is good. Thanks for the video.

[@macuyjuanjo]

Eres, un artista, chaval los que dan segunda vida a las maquinas, como tu, se merecen todos los elogios. Un saludo desde España.

[@sadashivgotkhindikar1119]

KEEN OBSERVETION TEACHES YOU MENY THINGS. YOUR INTEREST & ENTHUSIASM INCRESES AS PER EVERY STEP.

[@rameshshankar1010]

Fantastic strenuous job ,so many gears ,ball bearings classic 👌

[@Drawingmanderfull]

very nice. Your channel is always my idol .. God always bless you

[@carlameen7239]

The fact that every thing went back were it belonged was amazing. No parts left out. But I also would like to know why the dirty oil refill?

[@rogerraven6976]

Very nice. Love restore torque converter. 😻😻😻

[@juancarlosgomez3705]

Cuantas maquinas abandobadas se pueden recurar y muchos jovenes trabajarian con ellos, seve la pacia que tienes felicitaciones

[@mattmcfarland9154]

That is called a reduction box not a tourque converter, tourque converters are a fluid flywheel used on automatic transmissions. After using this gearbox as a plantpot im suprised the condition the internals were in after being in that soil, obviously it wasnt in there for to long. I would of used new seals and those bearings should be replaced as well , i could hear a slight whine or whirring of those bearings it shouldnt make any sound if bearings are in good condition. When tapping the bearing races in place ona shaft tap them in using a short pipe onto the inner collar and if installing into gears and casing use a cylindrical pipe as a drift that matches the outer collar of the ballrace and tap it home otherwise you will bruise the bearings and they will have that flat spot you can feel when you rotate them. Last advice is when you are tightening down the end covers for the shafts and bearings and top cover tighten the bolts in a criss cross sequence or alternate not go round in a circle, cover plates and shaft bearing retainer plates seat and seal better when this procedure is done. This reduction box looks like its for an inboard engined boat.

[@faiztoasa7554]

Walau saya tidak mengerti melihat ini, tapi saya salut dengan keterampilan saudara 👍👍👍👍👍👍👍. Merenov barang bekas menjadi bisa dipergunakan lagi, adalah perbuatan hebat. Salut 1000x!!!! 👍👍👍👍👍👍👍👍👍👍

[@Ksyusha-i2l]

Терпеливы мастер своего дела

[@carlosalber306]

Que Maestro que sos compañero un grande de las restauraciones de todo tipo y forma exitos saludos desde argentina!!!!!!!!

[@johnnychamorrov.2125]

Detallazo y gran gesto lo del minuto 1:35 gran labor y respeto a la planta😉🌱 y buen trabajo con la maquina⚙️

[@Restorationandmetal]

It is a good tree,./

[@knowltek]

Nice litl boat reduction an reversible box with synchronization ...fun job good work...cheers

[@joaoevangelistagomesdasilv2563]

Aqui no Brasil sempre acompanho seus trabalhos,e aprendo muito👍👍👍👍👍👏👏👏👏

[@buildhousedogcatbeautiful6376]

16.55 Boil the metal with oil. 17.12 welding of iron metal under sand

[@lazarolopes846]

77777777777777777777777777777777777777777777777777777777777777778878777777777777778777788777878788888887877777777777777777777777777777777777777777777777777777777777777guiou7877777777777777877778877787878888888 787868877

[@rucofeo]

Excelente trabajo, que paciencia de este joven

[@robertobezerra8376]

Top dimais parabéns 👌👌🇧🇷

[@BIG77BUBBA]

I don’t understand why you put the dirt in it? The work looks solid

[@Restorationandmetal]

It was abandoned by someone on a large farm..

[@denilsonbernitz4170]

@@Restorationandmetal lol you probably just bought it and then put it there to pretend it was "abandoned"

[@koltonshampine5441]

Yeah there wasn’t even any rust on the gears so it’s probably only been outside for a month

[@luismorgado9055]

I hate when he simulated found something. May be he believes we are all stupid. Why not just restaured it?

[@gerryjeuring8690]

loved it and anyone that complains about it piss off. Just working on this for a bit of cash and fun is good enough for me to watch.

[@КозловОлег-я6я]

Столько подшипников, даже не могу представить насколько этот агрегат надежный

[@danielm2504]

Reconozco que hizo un gran trabajo. No obstante es bastante rustico para montar las piezas. Medio bestia digamos

[@DWYD_PURPS]

you honestly got to love how this guy tries to save a plant but then literally Cuts another one in half with his shovel after he's done planting the first one

[@dietznutz1]

Literally nobody cares

[@DWYD_PURPS]

@@dietznutz1 no you dont care

[@DWYD_PURPS]

@@dietznutz1 😌😌😌

[@operadiga8923]

Cool. Perfect and the master with golden hands

[@kennethconnors5316]

really well done!! creative and technically correct not many could have done this

[@Restorationandmetal]

thanks you very much coment. have a nice day

[@andreikhasanov2510]

Хорошая работа 👍 интересно бы узнать для каких целей эта КП нужна или где пригодится.

[@Cat.986]

Это КПП от его тойоты наверное..

[@andreikhasanov2510]

@@Cat.986 🤣наверное

[@edsonnishimura3598]

Fantastic 👏👏👏👏

[@Restorationandmetal]

love

[@mixdiver12]

I also find occasionally gearbox in my garden….once a week maybe ? lol

[@josejorgeboattini8930]

Parabéns vc é muito caprichoso

[@galas455]

I'm glad to see you're using the pressure washer . . . kinda speeds things up.

[@frankmullholand5122]

This is so satisfying 😂 He even reburied the plant

[@n01celticfan18]

TOP RESTORATION BACK IN GEAR.

[@plumberman4u]

28:56 Is that USED ENGINE OIL going in.

[@Restorationandmetal]

oh yes

[@johns3655]

If it works, it works

[@smakssbow]

Не надо было крышку сверху прикручивать, надо было взять весь этот шайтан прибор, отнести в огород и обратно посадить в него кустики.

[@ezequielsilva2709]

Muito bom!!🇧🇷👍👍👏👏

[@celioricardocosta4973]

É a famosa paciência oriental,👍do Brazil.

[@eddietowers5595]

Although it’s not a great restoration, the resourceful process of how this antiquated contraption was restored, that I found 8mpressive. Work with what you have, to do the best you can. Sort of a “not the destination but the journey” kind of understanding/undertak8bg. Good job, nonetheless.

[@wongtongthongbong]

Great job ✌️

[@s2k__rav341]

The amount of safety in this video is astonishing.

[@Restorationandmetal]

thanks you very much. Have a nice day

[@lincolnbliss4885]

Now you need to grow the boat

[@andsoiltrees3451]

Always waiting for your new videos

[@Toolmamon]

I think you could of done more to this. It is a good job bit you could of polished and prepared the outside surfaces before painting and put a little more detail in cleaning all your parts. Also, you went through all this and put in used engine oil! You could have also put in the oil while the top was off instead of where the dip stick goes in. It is obvious that there is a cap there for a reason also.

[@osmiltonsoaresdossantos2001]

Eu sou fã de restouração.

[@ШавкетЯкубов-х6з]

Дал новую жизнь КПП ((или новый горшочек для растений 🍀🌲🌱.))

[@Restorationandmetal]

о, это хорошее дерево Горшок будет особенным, если я оставлю коробку в покое..

[@МойГосподин-и5к]

Что это за КПП?)

[@olehivanov8204]

@@МойГосподин-и5к судовой реверс-редуктор, судя по фланцам то валы небольшие, следовательно судно крайне небольшое. Какие-нибудь катера или рыбацкое, коих там полно

[@viejojorgge]

UN HERMOSO TRABAJO, MUCHA DEDICACIÓN, PERO SIEMPRE TENGO UN PERO,... ME GUSTARIA VERLO COLOCAR EL ACEITE A SU AUTO POR EL AGUJERO DONDE ENTRA LA VARILLA PARA MEDIR EL ACEITE, ..(AL FINAL DEL VIDEO) SALUDOS DE LA R. ARGENTINA..

[@oleg2000]

В конце отработку залили что-ли? 🙂 Интересно, куда эта КПП с новыми подшипниками понадобится теперь?

[@КонстантинРебрик-г8м]

да это реверс на катер да и земля недавно насыпана для выпендрежа

[@sergeyyakimov9350]

@@КонстантинРебрик-г8м Плюсуюсь..... хотел бы я посмотреть как он на самом деле смог рожковыми ключами эти болты открутить. А изображаемые "дикие" усилия прои откручивании...... а коробочка то на верстаке просто стоит, ничем не закрепленная.

[@АльбертСиразетдинов-ъ7щ]

Он ещё и по русски знает вундеркинд тайландский

[@cyroscop4473]

@@АльбертСиразетдинов-ъ7щ просто гугл транслейт и всё, при желании ему тоже на тайском можно ответить :))

[@MrDIY8]

Wow you make it like new.

[@kendellsoto4362]

Tus vídeos son increíbles no pares de hacerlos.

[@maccliff2115]

28:57 Everything was flawless until he added used oil to a perfectly rebuilt 1:1 forward/reverse gearbox. 🤦🏻‍♂️

[@alexaguilera7869]

Que bien quedo en dos pasos puedes ahorrar tiempo

[@marcelocarrico7255]

Parabéns meu amigo ficou show de bola. Saudações do Brasil.

[@johnwarkentinnikiskialaska8364]

Excellent job 👍

[@billyjack8119]

I'm from the west where fish bite the best. We dont have crap like that in our gardens. Nice garden by the way

[@Сарагонна]

Теперь можно поставить на него горшок с цветком :)

[@beyamoth]

What a fake.... Happens to "find" a gear box at the bottom of the garden. If it had actually been discarded for long enough to fill with soil and grow plants then it would have been completely rusted solid.

[@楊楊-k3o]

great job👍🏻👍🏻👍🏻

[@jamierichardson971]

Hell of a job for a young man you done great job building and if it was a set up done a damb good job setting up

[@Restorationandmetal]

thanks you comment. have a nice day

[@aximus1626]

Кто-нибудь может объяснить, ребята, в масле зачем все детали прокипятили??? Что это даёт????

[@valdetecandido8250]

Afinal pra que serve está bonita peça

[@DonnaMSchmid]

I can just see the dinner table tonight... Mom: "Son, have you seen that metal planter that used to be in the back of the garden? It's my FAVORITE planter, but I can't find it!" Son: "Ummm.. No, Mom, I haven't seen it!" **son slinks away from the table**

[@hugodasilva2443]

Parabéns pelo seu profissionalismo

[@keithgutshall9559]

He put new bearings in it,but didn't put new seals on the shaft. There's a ball and spring on the shift lever to hold it in gear.

[@ainungendutz5697]

❤ pekerjaan anda memanjakan mata

[@joelmiller2504]

Great job. Very entertaining. Too bad people have to hate something that is meant for entertainment. Keep up the quality content.

[@Restorationandmetal]

oh yes thanks you very much

[@discoverlight]

Really enjoyed this one. 👏🏽

[@techs9115]

Good jobs brothers savings plants

[@celinegreenidge5178]

Was wondering how on earth he would remember where each part went when he was ready to assemble.

[@goatsemarathon6642]

Was not a complicated machine. Watch a 10r80 teardown if you want to see complicated

[@ricaropie260]

i film disassemblys and then rewatch the vid

[@joaoevangelistagomesdasilv2563]

Muito bom você e tende de tudo🤦‍♂️👏👏👏👏👏👏

[@КонстантинКурносов-о8й]

Всё замечательно! Но ребятки слукавили с тем что коротка использовалась как клумба! Сколько она в качестве клумбы простояла, неделю! Масло на дисках осталось!

[@josesimons6335]

Parabéns Belo trabalho de restauração

[@Restorationandmetal]

oh yes

[@martinjuarez2508]

Maestro, impresionante trabajo!!!!

[@Restorationandmetal]

thanks you

[@gustavogomez6457]

@@Restorationandmetal me informan la función de esa máquina por favor. Gracias

[@joseandressalas7906]

Que aparato es, y para que sirve

[@deenever5099]

Joya! Y que mierda es?

[@nemvictor]

1:34 подсолил растре обратно, вдруг ещё вырастит железка 🤣🤣🤣🤣🤣🤣🤣

[@KG-yn9qi]

Not bad, not good (buyer beware). The hole above the shift rod in the case is for a spring and a ball. To hold as a detent for neutral also the steels of the clutch part may looked ok, but the frictions. They Will come apart as soon as put under load. They should of been replaced! Also did not see you replace the shaft seals ? Guess to whom ever you sell it too, will need it bad enough to buy it! It maybe a rare unit (where you live). Where the gears alone are worth the cost. Also whent together dirty don't belive the new bearings will last.

[@Restorationandmetal]

oh thanks for the comment. The gearbox the shipman bought. They still work quite well. Of course longevity will not be as new...

[@KG-yn9qi]

@@Restorationandmetal Sir sorry for negative response. You still did well with what you have to work with. Just could of been a lot better. Still don't let me stop you from doing what you got to do. Free world, go for it!

[@selfrestoration9564]

Amazing restoration Done 👌 Thumbs up 👍 👏 👏

[@leandroff108]

Quem é do Brasil deixa o likee

[@Restorationandmetal]

hello Brasil

[@hardprado3656]

Молодец !!! А зачем грязное масло заливать ???!!!!

[@billreyna1355]

Great work and results. I wonder who buys these finished products? Since you found this...do buyers wander into your shop or make requests? Thanks for the video.

[@Restorationandmetal]

oh thanks for the comment. The gearbox the shipman bought...

[@robertbernard2032]

Vous êtes génial.👍

[@АндрейПетров-ю5ь]

Качество редуктора из СССР!!!!

[@edmilsonresende574]

Ficou muito bom parabéns.

[@nilsonoliveira415]

Quanto tempo leva um trabalho desse.

[@jokerland326]

Aki en México jamás se encontraran fierro viejo así en el monte

[@ВладимирСундуков-п7ж]

С огородом у него лучше выходит

[@paulorth2251]

Interesting work, hopefully you can pass it on.

[@СтепанСтепанычП]

Во первых гужёны выкручивать не обязательно было. Разбор шестерён ничего не дал. А во вторых, пожалуйста соблюдай технику безопасности! Очень опасно зачищать детали проволочным кругом (тем более изношенным) в нитяных перчатках. Не делай так. Зацепит станок - намотает руку. По инерции палец может сломать... Береги себя и показывай правильный пример зрителям!

[@kimu-raikkonen1498]

It is recommended to use bare hands or leather gloves when working with the grinder. There is a very real danger of getting caught up in the machine.

[@Restorationandmetal]

oh thanks for the comment. Safety when doing first.;'

[@edmilsoncaires1250]

Trabalho excepcional, muito paciente, parabéns.

[@eco713]

素晴らしい技術です。

[@haroldalexis4200]

Amazing, hard work hobby labor! 😱☺

[@Restorationandmetal]

oh thanks for the comment. That's my favorite passion.;'

[@miltonferreira9680]

Muito bom estes restaurador, trabalho perfeito. Que Deus os ilumine sempre.

[@Drawingmanderfull]

Heat, boil the metal with oil

[@EddywaKenya]

pardon me. is this a torque converter or torque multiplier?

[@EddywaKenya]

this is a gearbox. forward and reverse

[@MrTarkus007]

should try an impact gun it's been invented

[@Restorationandmetal]

oh yes thanks you coment. have a nice day

[@zahidadvocate1703]

Great work 1000000000000. likes

[@АлександрГуранда-с3л]

В следующий раз сделайте, как-будто он ходит в огороде и ему на голову падает сверху какая-нибудь огромная хуйня)

[@Restorationandmetal]

о спасибо за комментарий. ты такой смешной./

[@МуслимИ-э9ш]

😄

[@cauandick]

Nice!