Restoration Vertical Drilling Machine | Restore Old Rusty Pillar Drill

restoration vertical drilling machine | restore old rusty pillar drill
Type Pillar Drill
Automatic Grade Manual
Drilling Diameter (in mm) 6 mm, 10 mm, 13 mm, 16 mm, 20 mm, 22 mm, 25 mm, 32 mm
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
Thank You so much follow me www.youtube.co....
#RestorationVR #Restoration2R #Restoration3R

[@derofromdown-under2832]

Your mains plug hasn't got an earth connection. Dangerous... A fairly good restoration... 8/10

[@andresscaglia9134]

Muy bueno su video,muy buena la restauración a la pobre máquina,usted le volvió a dar vida y a esmerarnos a nosotros,mis felicitaciones,saludos desde Argentina

[@horaciobruno1284]

Estimado, el trabajo de restauración es muy bueno, pero debo hacerle una crítica que creo será constructiva: al principio del video usted muestra una secuencia; enchufa la ficha en el tomacorriente, prueba de encender el equipo, y a continuación sin mostrar la desconexión de la red eléctrica procede con una tijera sin aislante a cortar el cable, aqui le digo que usted al hacer éste video tiene que ser pedagogo y demostrar que coloca la seguridad por sobre todas las cosas, en el próximo que haga coloque la secuencia de la desconexión de la red eléctrica antes de cortar el cable de suministro, esto se difunde a nivel mundial y si llegara el caso de un accidente usted sería responsable por el simple hecho de omitir una simple secuencia de unos segundos, y además coloque al principio una indicación que diga que no haga lo que se verá en el video, ya que éste fue realizado por profesionales que asumieron todos los riesgos de las acciones que se realizaron. Ésta crítica va con toda la buena onda que tengo para enviarle.

[@samuelfellows6923]

A fraudster and doesn’t care about that 😠⚠️

[@Nitro64819]

My machinist heart is really happy with the work you did. Thank you for respecting that drill press.

[@JDLarge]

Great job but why did you paint the main tube for the adjustable height tray? Shouldn’t that be clean steel oiled for ease in adjustments? It’s only going to get scraped up ever time you move it along with the surface of the tray. Also you didn’t break down the yoke for the chuck. There’s bearings inside of that too. It’ll be a bummer if they start rattling and squealing after it heats up from use. Never trust a bearing my friend unless you physically check it out😉 The paint came out really nice too👍🏼 thanks for taking us along

[@samuelfellows6923]

A fraudster and doesn’t care 😠

[@happyvaper5748]

Always a delight and pleasure to watch you'se guys performing restoration projects. Another 100% successfully achieved.

[@webmozaic]

Came across this video by accident. I recently purchased this exact model of drill second hand without knowing anything about who made it. Your excellent restoration answered quite a few questions. Many thanks!

[@lucialima781]

perfeito Eu admiro muito as pessoas que fazem esse trabalho

[@hectorfernandez3585]

Para mi, una exelente restauracion quedo perfecto y funcional espero y aguante la soldadura por ser fierro colado esa seria mi unica duda👏👏👍👌

[@robertothees5974]

Aprecio muito esses trabalhos de restauração, parabéns acho muito triste se deixar um maquinário deixar se acabar dessa forma.ainda bem que existem pessoas que tem o capricho de restauradas obrigado.

[@shademe]

well done

[@kalitelikuscu1928]

Abi birgün restore ettiğin eşyaların hepsini bir videoda çekip gösterebilir misin?🙏🙏🙏🙏

[@MikeAG333]

Did you really paint the pillar? Really? How did you expect it to work properly after doing that?

[@TheIanmurphy]

really nice job. only thing i would say is the ground wire has installed over paint, but i really like how to reinstalled the name plates and labels

[@markharrisllb]

When you were stripping it down I was really rooting for you and you didn't disappoint. Considering what you had to start with you’ve done an amazing job. You make a good team and as we don't know who does what it’s really well balanced. Hopefully your channel will grow so that besides the restored tools you’ll have you might be able to invest in some safer gear. I've subscribed, very well done it’s a job to be proud of.

[@plunder1956]

I love the way it arrived.

[@Чёрт_Лысый]

Ладно. Эти хотя бы оправкой подшипники забивоют... Но зачем красить серебрянкой листы магнитопровода статора?! Они, по идее, должны быть изолированными, а тут наоборот. 😐

[@ильяФедоров-я8я]

У меня точно такая-же сверлилка рабочая, дерьмо полное! Ее только в металолом отнести.

[@andy6739]

А зачем фрезерованные поверхности красить? В частности, рабочий стол и поверхность станины? Да ещё и столб, это все рабочие и трущиеся поверхности. С них и краска слезет через месяц и обрабатываемые детали краситься будут.

[@ОлегЕременко-к6д]

Он даже неправильно собрал его посмотрите до покраски и после на рычаг опускания головки😂

[@ZonBi]

Very good video . Great

[@dragon.ball.daiman]

8 mins in everything laying out. Felt like home. Great job 👏👌👌👍👁️

[@tinkeringinthailand8147]

How does the chuck spline attach to the vertical screw sleeve? All the restorations I view don't seem to detach this and replace the bearings. Mine just falls out and other than a few damaged threads I can't see how it attaches. Thanks

[@peterdeknijff1973]

You have done a great magnificent Job with a few tools Respect!

[@olivierhecbard5610]

Very good work but why you don't repair the angle of the base of the drill, it is broken and you hide it

[@andreav.6687]

I have one similar... manufacturing date: 1992.. made in taiwan...very good job and very good machine

[@Wolframcarbid85]

Главное занят, да и получается хорошо

[@elsdp-4560]

THANK YOU...for sharing. Very nice.

[@redfo2026]

Это не восстановление, это предпродажная подготовка хлама

[@timgame415]

Для себя норм, но сварщик он говно, это точно.

[@glennroach3337]

Another tool for the work of restoration you are doing

[@joewalsh1054]

I wonder if he unplugged the cord before cutting it...

[@WalterGil-k1o]

Excelente ❤

[@Snipercastt]

Muito bom meus parabéns 😎

[@ocydeama]

Excelente amigo, felicidades... Tengo una duda, ¿que liquido químico utilizan comúnmente para remover el oxido y a pintura?

[@pancary1]

Paint off

[@edmarkham2632]

A nice job . It should last a life time.

[@ccaaproduction105]

Good job

[@laptech8272]

I hope you are going to keep the drill to be used on other restoration projects because unless people are re-educated, giving the drill to someone else the same will just happen again. It will get used, then forgotten about, then neglected and then many years later another restorer will see it and do exactly the same as what you have just done.

[@wandersonbrito3843]

Fico muito bom!!! Mas tive a impressão que a rotação estava invertida

[@احلاممبعثرة-ه2خ]

ربي يسلمك ويحفضك على مجهودك الرائع اتمنه العرب يقمون نفس المجهود الرائع اللهم امين يارب العالمين والصلاة والسلام على سيدنا محمد وعلى آله وأصحابه أجمعين احسنت المزيد

[@franzotto448]

9:50 das gepappse (minderwertige Schweißnaht ) hält nicht lange. Aber gute Arbeit die du mit all deinen Projekten machst, Hut ab. 9:50 các tông (mối hàn kém) không tồn tại lâu. Nhưng công việc tốt bạn làm với tất cả các dự án của bạn, mũ ra. 9:50 the cardboard (inferior weld) does not last long. But good work you do with all your projects, hats off.

[@Wolframcarbid85]

Hauptsache der Junge beschäftigt sich und macht was sinnvolles. Aber Sie haben Recht

[@majstealth]

1:41 always a good idea to cut a live wire from a broken machine, it takes the machine and the human out of it´s missery...

[@saltmastermauritus5969]

😂😂

[@King007_]

Got same one ! Its great doing good work for me

[@Khanji743]

Good job. You brought a dead and rusty junk of metal back to the life ... but your work deserved a glossy finish.

[@sultanrajabd]

nice

[@1983poiuztrewq]

Nem újat vesz, megjavítja azt ami adatik neki. Ez szép!

[@Torkx100]

Congratulation!

[@felix807]

Was nice if you sandblasted , than primer and painting. Use grease for bearings.

[@setentaponto722]

É uma gama, modelo g2320 😬😬😬 Dependendo do vendedor, pois muitos mudam a marca kkkk.

[@ludvigtande1236]

Beautiful!!

[@LemaMebel]

хуютифал

[@rafaelmercado2021]

Que chingones son 👏👏

[@oscarhermenegildo643]

Exelente trabajo ,saludos desde PERÚ

[@petricabistricean1806]

Super tare

[@KOKO-jo6ty]

just paint everywhere!! but the real restoration is missing! lasy work!

[@olusabaolukayode9191]

You are amazing. I salute your courage. More grease to your elbow

[@technoclass400]

Что это за сверлилка с толщиной стенки колонны в миллиметр??? У китайских современных станков и то толще.

[@Sureshkumar0007-r1k]

Nice video bro

[@Zaraji1987]

Great man.....Thanks for video ....

[@احلاممبعثرة-ه2خ]

صناعه قمة الروعه تحياتي للظيف الكريم احسنت بارك الصنعه عبقري

[@martinmajerik2464]

Hello man you connected yellov-green cable to colored piece of machine. This solution is very bad you must connect it to clear metal because it is safety cable.

[@franciscowashington2155]

Muito bom 👍👍

[@SvarWork]

Без обид, но это не реставрация, а издевательство... с движком вообще треш🤦‍♂️ Видно же что краска на ржавчине и местами отваливается в процесе сборки... тут только пескоструй в помощь! Так же как и старые болты, только замена! Так же как подшипники, только - замена! И т.д. .... ух перечислять можно до бесконечности, одним словом - жопа🤦‍♂️

[@dominiktoredo4954]

SvarWork Cварочный Цех по вашему эта китайщина заслуживает нормальной реставрации?? Я бы с такой сверлилкой вообще не заморачивался бы слишком хлиплая она

[@ruslantkachenko3799]

У моего НС только станина весит больше чем этот станок в сборе.

[@streetfighter1726]

Молодец!!!!!

[@wandersonbrito3843]

Muito bom trabalho..o que é isso que você faz com os parafusos no fogo em 13:48?

[@c2lion83]

Magnifique restauration (sauf qua : 18 " 35 le mandrin tourne a Gauche ) et que pour percer ce foret acier est affuter a droite .Sinon beau travail

[@Ojlmatsuda]

C'est l'effet stroboscopique. Si le foret tournait en sens inverse, ce ne serait pas du forage.

[@FranciscoPerez-kj7rm]

Buena restauración, solo faltó un poco de grasa .

[@hubertrobinson8825]

Nicely done would like to give you good rod holder

[@ТохаТоха-е2х]

Держак, это сила.😂😂😂😂😂😂.

[@kelvinkyw]

Wow, excellent restoration work......

[@احلاممبعثرة-ه2خ]

الله وماشاءالله عاشت ايدك ايعينك الله يا مبدع

[@Zraibicorp8233]

You are a genius, then you are Moroccan

[@juanhuertas8777]

I would like to have a drill of that

[@antoniodobonfim1186]

Meus parabem pela recomperasao você e bom

[@griseldaortiz1722]

Muy excelente trabajo

[@antoniodobonfim1186]

Eu estou vendo você fazer a recomperasao da furadeira de bancada estava braba eu tinha uma mas precisei vender se um dia eu pude vou compra uma

[@yogibeer9319]

👍🏻👍🏻👍🏻👍🏻

[@wolfganglieberum9534]

Well done, but without the painting🤔

[@yeagerxp]

Well done 👍👍👍. It drills again. What more anybody want .Thanks for sharing

[@hoacucdai3300]

Can you tell me what that paint remover is?

[@danedewaard8215]

Nice work!!!

[@olivierhecbard5610]

And you forget to put grease where it is necessary

[@garyjones2582]

Take a couple bucks and go buy u some grease.. it looked like everything was assembled dry..

[@Deek6923]

It’s called a bench top drill press

[@agrolim]

Tira o fundo musical deixa o vídeo normal

[@dmitrijzyablik7649]

Нуууу скоооолько можно гайку откручивать?

[@alexgonzalez-ig2zz]

Que medida de banda lleva en las poleas

[@skalewilly]

what a great job, congrats!

[@micktaylor2500]

Great work mate

[@tokooficina]

Maneirissimo

[@m.projects2596]

Top 👌

[@TECBRASIL.]

Ficou top

[@VladoT]

The original color was hammertone green (research). It would be nice to keep the original color in the future videos.

[@شعيبالحصاة]

👍 مهندس بارع .. من أين أنت؟

[@الاشكيفالاشكيف-ل2ز]

Good morning creative work I want to ask you if you allowed is the metal you welded Hua cast iron and if so what are the wires used in the welding process and what kind of welding machine is it normal or DC system

[@177Valera]

9:31 сварщик от бога))) ну кто так варит толстое железо... Слов нет

[@МаксимФокин-н2я]

Это помоему чугун, мож он так варится?

[@ФениксПригорелов]

@@МаксимФокин-н2я Тем более не так. Сварить чугун это вообще на уровне кунг-фу.

[@ГаджиМагомедов-ф9ф]

Чугун это и совсем не так варится и все видео по восстановлению для людей далеких от техники. Не совсем грамотно.

[@timgame415]

Даже без провара корня шва, тупо как прихватками насрал 👍 И скос кромок конечно был "божественен". Тем белее в механически задействованной части, жить этот "шов" будет неделю активного использования, потом так же трещиной пойдет.

[@robertocspinto]

Nice job! Congratulations from Brazil!

[@muqrifrohaimi7881]

Nice

[@Surefiresecurity]

Interesting resto but welding with bare feet? Seems to be quite dangerous to me.

[@AJRestoration]

It's safe, welding is low voltage high amperage, You can physically touch the two poles and you will only feel a tingle. If your hands are wet you will get a slightly more aggressive shock but it is not life-threatening.

[@haydenyeap2818]

A.J Restoration not shock but UV rays and weld splatter

[@chandrashekharbanerjee8177]

I like it better with red colour.

[@jorgenogueira2444]

Parabéns muito bom trabalho de restauração da furadeira de broca, qual o óleo que você usa depois do maçarico(chama de fogo) para limpar as peças menores?. ficarei grato com seu feedback. Obrigado.

[@ДорИв]

А ручку родачи что не востановил?

[@johnwarkentinnikiskialaska8364]

You always do a outstanding job ,thanks for the videos

[@ДанилКуценко-щ9м]

А я ждал как они будут мотор в воде мыть

[@3roarel]

de seguro les sobraron piezas falto pomer el tope de la palanca en lado izquierdo