I work for a historic site in North Carolina, and I do woodworking like this at work. Seeing this was SUCH a helpful video. There are more than a couple planes at work that need love and this is a VERY helpful video for that.
@MrChickadee5 жыл бұрын
Like many hand tools, if well tuned they are a joy, if not...well they can be hell...
@marvinostman5225 жыл бұрын
I know a lot of people who play recordings of "white noise" to help them sleep like rain or wind in the leaves, etc. You ought to do one with the sound of planes and sharp saws
@0SQUARESINMYO5 жыл бұрын
I'd Buy That!!
@johnviewer23055 жыл бұрын
Been gone far to long Mr Chickadee...hows the rest of the family....
@MrChickadee5 жыл бұрын
Very well, more videos soon!
@cosmasindico5 жыл бұрын
Thanks for all your videos. Even if I never try half this stuff myself it's always calming and a joy to watch your craftsmanship at the end of a long day.
@mrplague98815 жыл бұрын
You can never have too many Wooden Hand Planes.
@rjamsbury15 жыл бұрын
Oh, I don't know... I recently bought a job lot that came via a longer route from a technical college. I now have about 40 wooden jack planes. Definitely think that's too many :-)
@F3Ibane5 жыл бұрын
@@rjamsbury1 Send some to me.
@chuckhightower27303 жыл бұрын
17,000,003 wooden hand planes is three too many wooden hand planes.
@calumblair5 жыл бұрын
Great to see you back , perfect timing as I have some wood planes to restore , thanks again for great quality work
@brianbible84155 жыл бұрын
You've inspired me to put down the power tools now and then, and get back to basics.
@Lunkenville4 жыл бұрын
I used my circular saw for a couple of cuts the other day....I put it back down and grabbed my hand saw. So much more satisfying!
@georgesweap75 жыл бұрын
I saw that you had a video today and got overly excited. Obviously, you are extremely busy this summer so that videos were not the top priority, understandably. It’s always a pleasure to view a new video from you. I learn a lot from you by just watching. I like your format style!
@arboristBlairGlenn Жыл бұрын
The irony of the foot powered grind stone with the air conditioner unit behind it -- was not lost on me
@512banana16 ай бұрын
Was that on purpose? 🤯
@justinjohnson1475 жыл бұрын
I always get so excited when a new vid comes up. Everything stops right now to watch.
@leoszes5 жыл бұрын
that reminds me, its your fault I started wearing suspenders! XD but they're pretty great, much less restricting than a belt. thanks!
@olddawgdreaming57155 жыл бұрын
EXCELLENT JOB with the planer. Always enjoy your videos. Thanks for sharing with us.
@joeymclaughlin12645 жыл бұрын
Your videos are a perfect combination of art, information, and relaxation. I can't get enough.
@larryshaw7965 жыл бұрын
To quote Roy Underhill may the grain be with you
@MrMomo1825 жыл бұрын
He's Primative Technology: The Next Millennium.👍
@victortallerbushcraft4425 жыл бұрын
fantastico!!!
@devogle79055 жыл бұрын
oorah, thank you, you have a gift. Great to see craftsman at work.
@lastingbuild13735 жыл бұрын
It’s good to see your treadle lathe in action!
@zioMav895 жыл бұрын
Hello Friends, someone can explain the wooden patch? Maybe i will try the trick on my plane too! Thank you and nice to see you again Mr Chickadee
@MrChickadee5 жыл бұрын
After a few lifetimes of flattening the bottom, the mouth gets too wide open. The patch is just making the mouth more closed.
@glasswinder5 жыл бұрын
I enjoyed this restoration. You sure have allot of the good tools for wood working. We're removing the carpet in our home reveling some amazing oak hardwood floors. Thanks for sharing.
@Rick_Sanchez_C137_5 жыл бұрын
Been forever... hope you feel relaxed and were able to do what you wanted, and get to where you wanted to be. As much as your fans want to see you making videos, remember that your life needs to be about you and your loved ones and seeing to their and YOUR needs... the biggest problem vets have is failing to take care of our own needs, don’t forget, you can’t take care of your loved ones unless you first take care of yourself. Take care, brother.
@MrChickadee5 жыл бұрын
Lots to finish up around the house...lots of videos coming soon!
@brianlisacampbell51854 жыл бұрын
I have been watching you from early on. I always appreciate the quality and value of your videos. I also have used hand planes for years and thought I understood the need for small tolerance from cutting edge and cap iron BUT never adjusted it to smaller tolerances to adjust for tear out. I just figured it was inherent with working with difficult grain and knots. I will experiment and hopefully have found the fine detail I was lacking. Thanks!
@davidgagnon28495 жыл бұрын
Welcome back! Great restoration and a great find. Butcher is supposed to be top notch steel in plane irons.
@jenniferedwards1765 жыл бұрын
Yay! You've been missed.
@boycebryan5 жыл бұрын
thanks so much for posting again. was about to have to start going through all your videos from the beginning again here in germany, nice antique wooden planes are a dime a dozen (almost literally); i picked up a few lots online recently for almost nothing. i was wondering how to make the mouth shorter on the huge jointer plane without putting a whole new sole on. will be trying that with one of the ones i don't have a blade for first, but a very elegant solution, thanks!
@ZoliMusic5 жыл бұрын
The soaking solution: Was that recycled vinegar or a molasses/water solution? Or neither? Thanks love the channel!
@christophschumacher6405 жыл бұрын
Thank you very much for sharing all your knowledge. Each time I‘m impressed by all these methods. You are a real craftsmen with heart and mindfulness🙂
@tylerkrug77195 жыл бұрын
Awesome. I will never get tired of watching this kind of video
@KarlBunker5 жыл бұрын
I'm pretty sure that planing through a knot like that and getting that smooth of a surface involves some kind of witchcraft.
@MrChickadee5 жыл бұрын
Its amazing what the cap iron can do!
@Maxid15 жыл бұрын
This was just plane fun to watch.
@0SQUARESINMYO5 жыл бұрын
I was asked Recently what my Favorite Channel on KZbin is. Easily It's Yours. Not Only Does It Calm Me to Watch but Equally Inspires Me to Push Harder to Utilize Every Tool in My Shop's Arsenal. Always Amazing Work. You are a True Artist of a Quickly Dying Trade. Keep Up the Great Work. My Wife Describes You as the Bob Ross of Woodworking. I think thats Quite Fitting. Tried to follow Your account on Twitter. Its Private though which is ok because Im Not much of a Social Media Person but was interested enough to make sure I wasnt Missing anything You make on other platforms if that makes sense.
@rojirrim72985 жыл бұрын
Great to see you back! Beautiful shavings you're getting out of that plane :0 and the finish on the knot! That's a dream right there. Thanks for sharing :)
@ryanmurphy30255 жыл бұрын
I liked this video before I even started to watch it.
@hrxy15 жыл бұрын
Have you been watching paul sellers and his knife wall? Great vid nice to see you back
@TermiteUSA5 жыл бұрын
I like Paul Sellers bit Mr. Chic says he got a lot of his mojo from Roy Underhill and Roy certainly broke good ground in this area.
@MrChickadee5 жыл бұрын
Although Paul should be given credit with introducing many new woodworkers to a "knife wall", it was a common practice globally for all woodworkers who wanted accuracy, not an invention of his.
@hrxy15 жыл бұрын
@@MrChickadee yes agreed but. At school inthe 60s we did carpentry with a fully equiped and very comprehensive workshop classroom, in a largly shipbuilding area of england. Many people worked on their own houses, making furniture etc, my father being one. Shipyard carpentry from 1921 to 61. I was an observant child child. At school we did not learn knife wall nor shooting board. Marking off was done with marking kinfe not pencil with 2 lines 1/16th apart. Outside line was cut line, the chizel to the final line. I did nt find out about knife wall till utube , what a revelation. I could never do tight joints nor cut at 90dgres in 2 planes. I cant help but think if i had known of kife wall, shoting brd my life ,working career wouuld have been different. Now 71 over the hill but still busy and active..
@hrxy15 жыл бұрын
@@MrChickadee also i never saw anyone using knife wall when i was working in construction and factories. You may well be correct in other parts of the world. All im saying is i never saw it when i was tyounger in britian. Love your vids kind regards henry ty
@Moraren5 жыл бұрын
A job well done! Beautiful plane! I have seen a couple of old planes repaired like that. But why are the patches usually triangle shaped?
@MrChickadee5 жыл бұрын
Good question...
@Calligraphybooster2 жыл бұрын
May I guess here? If the insert swells due to damp circumstances it would cause a step at right angles to the workpiece. This might render the plane inoperable, whereas a V shape will soon wear down at the tip. Your work will not be as true though…
@ryandavis75935 жыл бұрын
Zip goes the smoothing plane and zip I went when I saw that you posted a new video. Great video and great wood work.
@CJLeTeff5 жыл бұрын
Beautiful job as always Mr C!
@GregorShapiro5 жыл бұрын
Absolutely wonderful. Kudos. I would have expected hornbeam for the patch, I suspect it grows in your location...
@marvinostman5225 жыл бұрын
You have to show how to build your treadle grinder and what was your cleaning fluid you soaked the plane irons in. Glad to see a new video, I was starting to go into withdrawal.
@MrChickadee5 жыл бұрын
Vinegar, kzbin.info/www/bejne/p6i7mqavfNqsY7s
@JimDockrellWatertone5 жыл бұрын
I was expecting a full lamination to the bottom. The sole patch was very clever.
@MrChickadee5 жыл бұрын
Not my idea, lots of old planes Ive seen this way.
@tim_bbq10085 жыл бұрын
I was searching the Mr. Chickadee site earlier this week to make sure I didn't miss anything. So glad to see you're back. That plane went through that knot like it wasn't even there. So smooth, so nice. Keep up the great work!
@moonwolf71355 жыл бұрын
Beautiful hand plane enjoyed the video, and I liked that you showed how to fix the cracked sole with triangle and that the mouth was to wide from tear out.
@tombrown64645 жыл бұрын
Just as I was thinking to myself that I'd try a router plane to smooth the bottom, out comes your router plane. 🤣
@jasonhammond46405 жыл бұрын
Enjoyed and shared your video. Great to see an old smoother put back into service. Do my eyes deceive me or do I see a new bench too? Roubo?👍👍
@stihl8885 жыл бұрын
Nice work, you'll probably get another 100 years out of that plane now!!!
@supisupi16895 жыл бұрын
you've been gone a long time
@barthanes15 жыл бұрын
Thank you, it's so good to see a tool go back into use. I am currently cleaning up my great grandfather's tools, and getting them back in working order. When I got it cleaned, oiled, and sharp I was surprised how easy it was to use an egg beater drill.
@MrChickadee5 жыл бұрын
Ive done about every job one would do with power tools, using old hand tools, I never wish for a power tool, just think, "now what hand tool would best fit this job?"
@SuperHurdman5 жыл бұрын
Great to see you again! I take it that the little rectangle you put in ahead of the knife is hardwood?
@oneshotme5 жыл бұрын
Enjoyed your video and gave it a Thumbs Up
@bobframe19495 жыл бұрын
Whats the liquid that the rusty blade and cap iron went into?
@MrChickadee5 жыл бұрын
Vinegar
@peterl90975 жыл бұрын
Wait is this a chickadee upload!!!!!
@marksilverman17755 жыл бұрын
Quality as usual. Cheers from New Zealand.
@cuban9splat5 жыл бұрын
Excellent... just excellent. Thank you for sharing this treasure with us.
@amonferrari5 жыл бұрын
At last!!!! A video from the Mr. And Mrs.!!! All is well!!!
@glennwilck57905 жыл бұрын
That plane is lucky to have made it into your hands
@JDLarge5 жыл бұрын
Good to see you back brother, hope all is well on your end✌🏼
@adamcfmacdonald5 жыл бұрын
Just a comment to say thanks and please make more videos. Be well.
@craigrigby14985 жыл бұрын
$13 bucks?!? Great score!
@brandonwilson81155 жыл бұрын
My favorite part of this video is the strop-topped oil stone box. I may have to steal that idea.
@BoB4jjjjs5 жыл бұрын
Excellent job Mr. Chickadee. I do love your videos.
@738polarbear5 жыл бұрын
Another example of wood engineering perfection Chickadee.. Bravo.
@ginglyst5 жыл бұрын
waauw that sound of a sharp hand plane making paperthin shavings. Its better than the diresta arm hair test
@poepflater5 жыл бұрын
Hey, it is fine to talk, You will get used to your own voice quickly. I promise you it sounds cool to someone somewhere.
@jboatman815 жыл бұрын
I need to do this to a couple of mine. Great work!
@Ludwig45715 жыл бұрын
thank you for keeping some of the patina on the iron, i think that helps protect it from further rust damage right? and that grinder is legit
@gilesbooth30555 жыл бұрын
Nice to see another video.. keen to see what’s next on your build list.. Totally get what your about with you way of working.. My power mitre saw gave up on me on a new build.. had to go book it in for repairs and order parts.. so while that was being done.. went and got a hand mitre box and just continued the job. Having all these fancy Dewalt power tools skill saws, nail guns is all well and good.. but when they go wrong.. which they do from time to time.. dose kind of leave you screwed. Or how about no power in site.. have to spend more money on a generator.. or left your charger at home.. got to go home and get it losing time at work. So yeah love what you do and are all about.. Something to be said using the hand tools in this day and age.. come as a great back up.. and they last a lot longer. Know how to sharpen tools like hand saws folks? Well.. they don’t teach that at college? Just go and by a new one.. But as you say josh.. learning old skills before they dye out.. sharpening all your kit saws included.. caring for it all.. then they will last you for generations .. not just the length of a few jobs.. Besides nothing nicer than ripping a plank to length with a good old rip saw.. get a good work out and it’s satisfying to do. Doubt the Japanese and Egyptians shad fancy nail guns and chop saws etc when they built the pyramids and pergodas and look how long they have lasted. Japanese temples withstand earth quakes to.. and they are on joints.. amazing.. So totally with you Mr C on your methods. But would be interesting to know how long it takes you to build a house.. compared to the modern way of framing.. be nice to see how the framing industry has moved on over the past years.. from the way you and the Japanese do it.. to now. Keep up the good work and can’t wait to see your next project. On a totally different note.. have you see this guy.. amazing and check out his machine.. he is doing a updated one now.. but talk about a carpentry project.. enjoy.. m.kzbin.info/www/bejne/f6e4hmugpKeVZ7M
@uncleArch5 жыл бұрын
Very good work ! Cheers from France !
@tkjazzer5 жыл бұрын
glad to see your safety glasses on!!! protect your eyes
@barnshopproductions71325 жыл бұрын
Excellent work, and glad to have you back. Semper Fi!+
@harpoon17345 жыл бұрын
You obviously have some kind of crazy ex or something, I can’t see any reason why anyone would dislike any of your videos. You’ve given me so much inspiration. Just bought 2 acres and am refurbishing my 100 year old garage/shop so that I can get back to building again
@franek_izerski5 жыл бұрын
By the way, how's the Korean wooden floor holding up?
@MrChickadee5 жыл бұрын
Just love it. Ive tightened it up once, and added some Roxul insulation underneath, ready for winter!
@franek_izerski5 жыл бұрын
@@MrChickadee Great! May I ask how you tighten it up? I wondered about that.
@MrChickadee5 жыл бұрын
@@franek_izerski Oh sure, you can just tap wooden wedges between the boards till they are all tight up to the front, this will leave a gap in the rear of each lane next to the capping board, this gap is then patched by driving in a carefully sized strip. After 8 months or so my green floor needed a patch of about 3/4" on each lane.
@franek_izerski5 жыл бұрын
@@MrChickadee Thanks!
@tkjazzer5 жыл бұрын
@@MrChickadee any plans for a traditional Ondol (Korean under floor heating system?) binged.it/2mTeery
@mandyleeson15 жыл бұрын
A simple joy. Thank you.
@jasonsierra36965 жыл бұрын
How long where the steel and chip breaker in the vinegar?
@MrChickadee5 жыл бұрын
2 days
@a-ls63335 жыл бұрын
Poetry in motion.
@Dutchshedwoodshop5 жыл бұрын
Beautifull job!
@donaldtrabeaux13055 жыл бұрын
Awesome job glad to see you back
@thomasarussellsr5 жыл бұрын
Beautiful work, as usual. Thanks for sharing.
@johnshoureas16295 жыл бұрын
What was the brand name on the blade ?
@MrChickadee5 жыл бұрын
Butcher
@tomlee79665 жыл бұрын
very nice as usual, glad to see you back
@JeffGloverArts5 жыл бұрын
Good to see you back! This is a beautiful tool. Nice work!
@offpherj78845 жыл бұрын
Very nice...….
@barlotardy5 жыл бұрын
Kinda surprised you haven't built some kind of wooden housing for the AC.
@MrChickadee5 жыл бұрын
It will be coming out soon, winter is coming!
@vladabocanek37035 жыл бұрын
So finally I know what is vinegar for. Thank You!
@soundingoftheclock5 жыл бұрын
Hey man I hope all is well!
@thomream18885 жыл бұрын
When you're cleaning stuff and I see the toothbrush come out, I know it's about to get serious! Thank you for another installment of the "This is what I do so shush up and listen" Class of Living Better. Your instructions are taken to heart, even if a dose of cancer has shortened my time to do such 'important stuff' as this. But fear not, its been a well-fought thirteen year battle, and it ain't over yet. I still have much to learn, from you and many others. So thank you for being one of the lights shining on my path of life.
@MrChickadee5 жыл бұрын
My best friend is cancer free after 15 years of fighting it, he just turned 85 and has a new lease on life. I know it can be a struggle, but you can win, and I surely hope you do!
@thomream18885 жыл бұрын
@@MrChickadee I salute your friend! And I think that is why I'm still here - to offer encouragement to those that have just started their fight. I have two grandsons I was never supposed to live long enough to see - the oldest starts High School next year!!! That which we fight for, we value - and boy it's been a fight. Bue each day is a gift from God, and my job is to find a way to use it the best way I know how. And that, my friend, is sometimes the harder of the two. Please give your friend a hug for me, I appreciate his example and his leadership. And your kind words are appreciated. - a Professional Cancer Fighter (!)
@jean-marcschwartz25255 жыл бұрын
Hi, you're so so rare, glad to see you again.
@shaunbarber27465 жыл бұрын
Beat the heat my friend
@MShahzaibwoodwork3 жыл бұрын
Very naic
@MsRazvan295 жыл бұрын
Bravo respekt ❤🤝❤
@ericolson61353 ай бұрын
Using a planer to square up a planer ... that's kinda meta! LOL! This is awesome. Thanks for sharing.
@Tanaruck5 жыл бұрын
What is the purpose of the patch you've made on the sole ?
@bobframe19495 жыл бұрын
I'm no expert but I'd guess it was done to narrow the throat opening and minimize tear out?
@LOOPPEY5 жыл бұрын
Something very pleasing about seeing you restore old tools. It might be the fact you never know who owned that tool or what was built with it. Thanks for the video. Good to see you back.
@MrChickadee5 жыл бұрын
I just LOVE when the old wooden planes have thumb imprints, sometimes dented into the wood...wander how long that took?
@LOOPPEY5 жыл бұрын
Good to know you will keep it good and use it. Take care.
@darrenwidas24735 жыл бұрын
Well done Sir.
@jimmcnett5 жыл бұрын
I really enjoy your videos. Why did you add the beech patch? Was the mouth to large for your liking?
@richardbutterfoss23535 ай бұрын
I like the way you reduced the gap on the plane. One of the planes I bought had a huge gap. It must have been for a scrub plane. But I like what you did! Very nice! RWB ❤🎉
@williamhector68635 жыл бұрын
Fantastic 👍🏽
@ludvigtande12365 жыл бұрын
Very nice. First I’ve seen it done with a patch. 👍
@andyg.50195 жыл бұрын
Keep old tools
@Chaos101Theory1013 жыл бұрын
Is that a Warrented Sorby plane? Looks like it... I have the exact same model I picked up a year ago for £12 here in the UK.
@adobotachibana732Ай бұрын
I am currently building wooden handplanes in the traditional style and I have seen a lot of sources talk about finishes on handplanes. But almost nobody talks about whether you should finish your sole and bed. It appears that you put finish on your sole, do you also put some on the bed and wedge?