Hi Andrew, fantastic idea to refurbish the old parts. I have been at the Opel plant for 25 years and have seen the small parts press shop and the old galvanizing shop before much was outsourced. These parts are impossible to get today even in Germany. And newly galvanized they look like fresh from the factory. That's what restoration is all about. Your Manta looks great. Exactly in the color as I would also like to have.
@AndrewDoesCarStuff2 жыл бұрын
Wow, very cool to hear from an Opel insider! Glad you approve of my project, thanks 😎
@coloradodirtbike59306 ай бұрын
@AndrewDoesCarStuff do you know If you can apply yellow chromate at a different time. For example if you zinc your bolts can you weeks later apply the yellow chromate, or does it need to be done all at the same time
@NathansKiwiCars3 ай бұрын
My 300zx will greatly appreciate the knowledge I’ve gained from you fantastic video thanks heaps 😁
@backyardprojects99454 ай бұрын
Lots of good tips. Love the Manta. Hi from Australia.
@air_cooled_andy5 ай бұрын
Hey man, just discovered your channel. Great presentation, nice and chilled. That Manta is one of my all time favourite cars, lovely shape. The old Vauxhall Firenza coupe has some nice lines too 😎🙌
@AndrewDoesCarStuff5 ай бұрын
Thanks! I never knew about the Firenza, had to look it up. Pretty cool looking!
@joell4392 жыл бұрын
This is the first video of yours I’ve had the pleasure to watch. Very Impressive video….. amazing content and some of the highest quality of editing and storytelling on KZbin. Definitely deserves a subscription from me. Thank you for taking the time to do this. I look forward to seeing more of your videos. 👍👍😎👍👍
@AndrewDoesCarStuff2 жыл бұрын
Well thanks very much!
@haraldekkjestol Жыл бұрын
Wow! You are really following a good system! Impressed!
@AndrewDoesCarStuff Жыл бұрын
Thanks!
@mikeb.17052 жыл бұрын
Great tips! Thanks Andrew!
@AndrewDoesCarStuff2 жыл бұрын
Thanks Mike! Working on a car like this is a far cry from my experience with the '68 Cougar, which has just about every little clip, screw, nut and bolt available brand new!
@bmill311311 ай бұрын
Great informative video. Not a bad price for having all those items professionally done! I once date a gal who had a similar Opel Manta.
@Texas_taildragginАй бұрын
What a great video. Really glad I watched this after I restored my car. Haha would have helped had I found this sooner!
@markyoungoutdoors2497Ай бұрын
Andrew…..you have made an excellent video here. Thankyou. I’m so glad it came across my feed. I’ve downloaded it. It’s that good! Excellent effort. Calm demeanour, professional, and informative.👏 P.S. …..and I was happy to subscribe.😊
@AndrewDoesCarStuffАй бұрын
Thanks for that!
@terryobrien4644 Жыл бұрын
That is a really cool way to go ! Thanks for the tips!
@jacquesricheur49982 жыл бұрын
Hello from France Thank you for your videos
@AndrewDoesCarStuff2 жыл бұрын
Bonjour! Thanks for watching!
@chrisjbonjour11 ай бұрын
Thank you for the video. This has been very helpful for my restoration project.
@AndrewDoesCarStuff11 ай бұрын
That's great, that was my goal!
@nick_intheskoolie88403 ай бұрын
You did a great job with this video. Thank you so much for all the tips and the level detail that you went on to explain. I’m definitely gonna take some of these tips and apply it to my project
@AndrewDoesCarStuff3 ай бұрын
Thanks, glad it was helpful!
@Jr8key15 күн бұрын
Restoring a Manta respect
@ShemZ6645 ай бұрын
I really enjoyed this video and I really liked how you identified and organized your bolts. One tip that I found is 30% vinegar for stripping parts and bolts. It takes paint, galvanize, rust, corrosion, etc. I let it sit in it for about 2-3 days. It does flash rust very quickly after you take it out though. It is very corrosive so you don’t want it on your skin or eyes.
@VliegerNL9 ай бұрын
Excellent video. Nice narration and information. And an Opel? Awesome! I will be using your documentations system. Hadn’t though about actually editing shots of disassembled parts with an iPhone and add text.
@AndrewDoesCarStuff8 ай бұрын
Thanks! It can be time-consuming to do it this way, but you will thank yourself later.
@ForgeAndWanderАй бұрын
Super helpful video. Literally went through this exact buy=>build=>outsource decision tree.
@ronzanderwilliams92553 ай бұрын
great video!!! I want to do it for my 95 Mitsubishi Delica (very rare stick shift, diesel)
@gerardfenn39886 ай бұрын
Hey Andrew, I'm only up to @1:12 and there they are. Yellow Zinc Chromate. AWESOME. Now if only I can get my Butt in gear and buy that damn '69-'72 Highboy to restore before I need to be restored. This is going to be a great video. Back to watching.
@mariocooldude90925 ай бұрын
They look awesome 👍 sometimes ya just gotta pay 💲💵 to get things done right 👍
@kevinchamberlain7928 Жыл бұрын
Beautiful job on all your gold stuff! I'm setting up in the future for small-scale plating for bike and scooters, and also vapour honing. Really looking forwards to it! Who knows, it may even overtake my carpentry and joinery job???
@AndrewDoesCarStuff Жыл бұрын
As long as you have the space for all the equipment, and you think you'll do enough plating to make it worth setting up, I say go for it! It's always satisfying to make old things new again.
@G4Disco Жыл бұрын
I’ve got an “old” 1991 Subaru that needs a mild restomod. While I can still get most of the hardware, things like rusty brackets and springs will get the zinc treatment.
@andrewgalen4558 Жыл бұрын
do you have a link to the gauges you used for bolt identification, love the idea of having those in the shop!
@AndrewDoesCarStuff Жыл бұрын
Thanks Andy! I got mine on ebay here: www.ebay.com/itm/323847814437 The only disadvantage with these thread gauges is that you can't measure female threads. But otherwise they are very handy and inexpensive. They appear to be made by a company called BoltSize-It, but it looks like they only sell in bulk. Still it's interesting to look at their site and get ideas for other kinds of thread measuring devices. www.boltsizeit.com
@mrbookends Жыл бұрын
Just stumbled on your channel this morning as I was also down the rabbit hole of zinc plating my parts on my '77 Datsun 620 build. First of all, fantastic video quality and editing - I instantly subbed! Second, it only cost you $400 to get your gear plated? I mean, that ends the debate for me, personally, as I figured it would cost a few hundred to get set up and then factor in what my time is worth. LASTLY, the Belmetric info has been an absolute life saver!
@AndrewDoesCarStuff Жыл бұрын
Thanks very much! I'm glad this saved you some time and decision-making while going through the same thing. That was what I hoped this video would do. I'm sure prices vary at different plating shops but in the end I think it was well worth it. They also have better ways of stripping the old rusty parts clean, like acid baths and such.
@dmessner26 Жыл бұрын
Andrew, very nice series on your Manta, owning one myself really enjoy seeing you sort through yours. Can you tell me where online you got the thread gauges? I really like their simplicity and didn't come across that style when searching. Thanks in advance and keep up the good work!
@AndrewDoesCarStuff Жыл бұрын
Thank you! The only disadvantage with these thread gauges is that you can't measure female threads. But otherwise they are very handy and inexpensive. I got mine on ebay here: www.ebay.com/itm/323847814437 They appear to be made by a company called BoltSize-It, but it looks like they only sell in bulk. Still it's interesting to look at their site and get ideas for other kinds of thread measuring devices. www.boltsizeit.com
@dmessner26 Жыл бұрын
@@AndrewDoesCarStuff thanks Andrew
@crusheen Жыл бұрын
Very nice.
@roselh12 жыл бұрын
Hi Andrew, good episode! Who did you use for your plating and how long did it take from the time you sent parts to them till you had them returned? Thanks so much. Lin
@AndrewDoesCarStuff2 жыл бұрын
Thanks! I think who you use for plating can depend on where you live, for me I wanted to find somewhere relatively close by. I went with Van Nuys Plating. Turnaround time was about 5 weeks. I hesitate to fully endorse them because they did ruin a couple of my parts (there were a couple of non-steel parts that got put in acid with everything else) but apparently it was a very rare mistake as it was a brand new employee who didn't know better at that time. They did give me a discount to offset the cost of replacing the parts. Aside from this accident they were good to deal with and the results were nice, as you can see. So I chose not to mention this struggle in the video. But it's worth keeping in mind, if you have any pot-metal or aluminum parts, be sure the plater is aware and treats them accordingly.
@tommarkstrom44207 ай бұрын
Hi Andrew. I’m restoring my 1950 Dodge Power Wagon 1-ton pickup truck so the notion of using the original fasteners brought me to your video. $400 seems reasonable. I’m curious what company you used, the date you had it done (prices are getting stupidly high as of March 2024), the turnaround time, what prep was required before sending, shipping costs, etc. Thanks.
@AndrewDoesCarStuff7 ай бұрын
Hi, I used Van Nuys Plating, and it was in 2022. Turnaround time was about a month. I don't think you need to do much in terms of prep, as they put the steel parts into an acid bath to strip and clean them. I had already wire-wheeled most of my stuff, thinking it would help, but it probably wasn't needed. I'd ask them to be sure. A note on the pricing I got, it's a little more complicated, because they ended up accidentally tossing a few pot metal parts into the same acid bath (turn signal housings, throttle cable bracket) which destroyed them. So they gave me a $100 discount for that. I didn't want to throw them under the bus in the video - they were very apologetic and apparently it was a new employee who made the mistake. That being said I was happy with their work and would use them again.
@chabat124 Жыл бұрын
Been debating whether to set up a plating station at home. Like you, unless I do it over and over, it seems a better option to pay for someone else's time and expertise.
@AndrewDoesCarStuff Жыл бұрын
Yep, exactly. I like doing things myself but sometimes it just makes more sense to pay the pros.
@davidrobinson64956 ай бұрын
So did you have to clean them all up before you sent them off or do they handle that task as well? The parts look great.
@AndrewDoesCarStuff6 ай бұрын
Best bet is to ask the plating shop you're using. I don't think I actually needed to clean my hardware, as they used an acid bath to strip them back down to bare metal before plating.
@joef6858 Жыл бұрын
Did you have to prepare the fasteners for zinc or did you just send them crusty and rusty? Great video.
@AndrewDoesCarStuff Жыл бұрын
Thanks! Well I did wire-wheel most of the stuff before sending it, thinking that would save me a little money, but I don't think I actually needed to. They throw everything into an acid bath that eats everything but the steel. So I think you could send in crusty parts without issue.
@gzman110 ай бұрын
what company? @@AndrewDoesCarStuff
@robertoferrari5397 Жыл бұрын
.wow..nice and shiny...what was the turn around time in getting your stuff back from the plater?
@AndrewDoesCarStuff Жыл бұрын
It took about a month if I remember right!
@richardslaby8527Ай бұрын
Hey Andrew, do you mind sharing what company did the plating? Thanks
@AndrewDoesCarStuffАй бұрын
Van Nuys Plating
@jasono21393 ай бұрын
What's the cost of professional yellow-zinc-chromate plating? Why not nickel plating? A company I used to work for would always nickel plate all steel parts for corrosion protection. Sometimes, for really critical parts we would send out to have ARMTEC coated.
@AndrewDoesCarStuff3 ай бұрын
The cost was in the $400-500 range for my batch of parts. I chose yellow zinc because I like the look and it seemed like the most “OEM”. Nickel is an interesting idea, might be more durable. And probably more shiny if that’s the look you want.
@jasono21393 ай бұрын
@AndrewDoesCarStuff wow, that's more expensive than I expected! I wasn't implying that the yellow-zinc was bad. I think it's nearly as durable as the nickel, but it has a very distinct look to it. I think we used nickel partly for its subdued appearance on our equipment.
@param888 Жыл бұрын
could you tell me the size of bolts that you mentioned as unique and difficult to find? please tell it's M size length, pitch and length of its threaded area
@AndrewDoesCarStuff Жыл бұрын
It would be tough to tell you all of them, since there are quite a few. I took pictures and measurements of them though. One example is the upper control arm bolts, since they are very long, but only a little bit at the end is threaded. Also some of the washers were quite unique, as well as the inner sleeves for the bushings.
@param888 Жыл бұрын
how much it cost you that plating thing for all? was it kg basis or per piece basis?
@AndrewDoesCarStuff Жыл бұрын
It was around $400-500 and I think it was based on the size / volume of pieces.
@marianopeluso9 ай бұрын
At 0:20 what type of paint is that?
@AndrewDoesCarStuff9 ай бұрын
That is VHT Roll Bar & Chassis paint in Satin Black (SP671). It's one of my favorites for this kind of thing.
@kennethtruong8570 Жыл бұрын
Whats the name of the company you used?
@AndrewDoesCarStuff Жыл бұрын
Van Nuys Plating
@lesterdj83 Жыл бұрын
How make the work for you?
@AndrewDoesCarStuff Жыл бұрын
Who did the plating? I used Van Nuys Plating, here in California.
@donrush56902 жыл бұрын
Oh! Farted…
@AndrewDoesCarStuff2 жыл бұрын
I laughed so hard when reviewing that footage, I had to leave it in.