Super jest ten cały tasak odrestaurowany pozdrawiam serdecznie 👍👍👍👍
@kamilkartun Жыл бұрын
Wah terbaik
@amitbhattachariya9357 Жыл бұрын
Nice Restoration work.
@deusefulhand7524 Жыл бұрын
Yes, thank you
@BigDavetheMiddleAgeGamer Жыл бұрын
Hear about those warriors from Hammerfell? They got curved swords. Curved. Swords.
@sandrastratton1374 Жыл бұрын
ách hát của đức phúc luôn làm hài lòng tất cả mn.
@jesiemixtv..479 Жыл бұрын
Nice boss
@ozarked2363 Жыл бұрын
I did a similar project on 2 corn knives that belonged to my great-grandpa. I soaked them in Evapo-Rust to remove the rust. The blades are much thinner spined than this machete so I was not able to grind out the pitting. My solution was to cold blue them then I made new handles for them out of some really nice quartersawn sycamore. Just for grins I cut the necks and bases off .223 cases and used them for lanyard tubes. I had to drill new holes for that the steel was so hard I had to buy carbide drill bits. Maybe someday they will make it to my great-grandson.
@deusefulhand7524 Жыл бұрын
That is so great. Thanks sharing .
@franksworld9922 Жыл бұрын
Do you have any video on it? I would really like to see it. 👀
@paolobuffa68892 жыл бұрын
Nice parang and excellent restoration: new life to an ancient tool.
@murrayhagel15112 жыл бұрын
I really enjoy seeing the end results of some of the restoration videos, however watching the dramatics is very painful. It’s not just your videos, there are a lot that makes it look like they have trouble with a wire brush or any of the tools they use.
@deusefulhand7524 Жыл бұрын
I understand
@The4cp2 жыл бұрын
Now that is a working tool!
@vinceianni40262 жыл бұрын
Beautiful restoration good job well done mister
@patricknoonan3610 Жыл бұрын
Nice short and quick cut. Good blade work.
@augustm.moschera86462 жыл бұрын
Awesome! That thing looks crazy sharp! Great job.💪💪👍👍👍👍👍👍👍
@user-pi8vt7ut3n2 жыл бұрын
... отличная получилась реставрация, выглядит как будто новый тесак!-, но пора уже приобретать пескоструйный аппарат!-, хватит металлической щеткой снимать ржавчину!!!👏👏👏🤫👌🆗🇷🇺👈🦾🪓🔪🛠️⚙️🔩🔗👍🤓🤭!!!
@warrencarnright37472 жыл бұрын
Great job, He would be proud .
@Kleiner_Lutz2 жыл бұрын
Just a tip: you got a lathe and planned on replacing the wooden part of the handle anyways. You just could've found a way to clamp the handle in the lathe then to clean up the metal part. It's a bit easier than filing it clean ;)
@deusefulhand75242 жыл бұрын
Yes, thank you very much .
@andrewhaddock79962 жыл бұрын
Cracking job,proper working tool.
@jdzencelowcz2 жыл бұрын
That's frighteningly effective.
@manuelplez64292 жыл бұрын
i 'm sure that your grandfather would be proud of you .
@deusefulhand75242 жыл бұрын
Thank you ☺️
@RestorationAustralia2 жыл бұрын
Very cool, well done.😊
@deusefulhand75242 жыл бұрын
Thank you 🤗
@krishs7182 жыл бұрын
Superb work. An inspiration for a person like me. Thank you very much.
@deusefulhand75242 жыл бұрын
Thank you
@abphone1724 Жыл бұрын
👍👍👍👍👍
@_MONOTYPE_ Жыл бұрын
Ручка- шедевр!
@Aquadus2142 жыл бұрын
Why the blade wasn't heat treated?
@deusefulhand75242 жыл бұрын
Because the cutting edge is hard enough.
@rogerpatrongonzalez5800 Жыл бұрын
👏👍👏👍👏👍👏👍👏👍👏👍👏👍
@oneshotme2 жыл бұрын
Great restoration and I'm sure your grandfather would have liked it!! Enjoyed your video so I gave it a Thumbs Up
@deusefulhand75242 жыл бұрын
Thank you very much!
@oneshotme2 жыл бұрын
@@deusefulhand7524 You're very welcome!!
@timbow50 Жыл бұрын
You blade restoring people sure waste time and a lot of energy hand sanding. U can do 90% on a belt sander and use a vibrating hand sander after that. Then polish basically by hand. After all the idea is just to remove metal and rust pits. Your finished restore here looks very very awesome.
@deusefulhand7524 Жыл бұрын
Thank you
@kennethreed8827 Жыл бұрын
I really love watching these restoration vids. One thing I really don't understand is, why do they show us a project 3 or 4 times ? Do these folks think that we don't get it after the first look ?
@Jeffrose_ Жыл бұрын
I would have never cut the end off. It's not mine so okay.
@TruthIsTheNewHate842 жыл бұрын
Awesome. Only thing I would have done different is make the handle oblong instead of round. Gives more control. That's just me though. I prefer a more square or oblong shape handle.
@deusefulhand75242 жыл бұрын
Thank you for your comment.
@restorationofdirty2 жыл бұрын
Congratulations good video 😍
@deusefulhand75242 жыл бұрын
Thank you 😍
@finbarscanlonwolf2 жыл бұрын
Wooden handle would take the impact shock from your hand when chopping. And make it oval so it doesn't turn in the hand. A shape like a parang. Safer & more control.
@deusefulhand75242 жыл бұрын
Thanks for your comment.
@franksworld9922 Жыл бұрын
Is this a type of san mai steel? It looked like it is layered when you cut it a new point.
@masterskay_na_naberezhnoi2 жыл бұрын
👏👏
@Kieran04102 жыл бұрын
Stunning job, did you leave the handle round instead of going oblong because it was easier to put the metal sheath back on, for functional reasons or did it just not cross your mind? This is not a criticism, just a question, its a fantastic job, I couldnt do either of them :)
@deusefulhand75242 жыл бұрын
Thank you for your comments . I want to make it in another way .
@alexanderalbach4682 жыл бұрын
👍🏻😀
@freddystpierre91062 жыл бұрын
You should clean Off items before going onto higher grit
@ianjones8573 Жыл бұрын
If you really tried hard, you could make a slower video.
@666toysoldier2 жыл бұрын
In the US, that would be called a corn knife.
@deusefulhand75242 жыл бұрын
Okay , Thank you !
@jasonbell59052 жыл бұрын
What kind of bullshit is this with a little white brush and black gloves 👎🏻
@TylerSnyder305 Жыл бұрын
To sand polish and modify an old tool is not a reatoration. You modified it, you did not restore it.