Restring Spool for Black & Decker Trimmer / Edger

[@UserKirkland]

Thanks for the video. Does anyone know why the string would not feed automatically?

[@becausestuffbreaks]

YES! I made a new video showing how to do it and not have an auto feed issue. Here's the link: kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@svenkat2006]

.08 in look too thick to move. I think .065 is better. When I saw this string thickness is more than the original string that came with trimmer.

[@XivicX]

@@svenkat2006 exactly

[@Forklift_Fella]

Yes. The manual and spool coveres all say DO NOT use string larger than .065 or the line will not feed correctly. This is a great video showing what NOT to do. If you want better line try MaxiEDGE commercial .065.

[@harisyoung4110]

That round string look stiff, maybe that cause the issue.. i run the 2.4mm twisted string without any problem, because its flexible..

[@ToniTerrific]

I had a stroke a year and a half ago and the hardest adjustment for me is getting frustrated super easy. I end up wanting to throw something. To that end, I have taken up the habit of watching every available video about something new I have purchased to avoid as much frustration as possible. This was the only video on my new weedwhacker that I needed to watch. Thank you so much, you are like a God to me, I wish my doctors could do as much LOL!

[@becausestuffbreaks]

Lol. I'm no god but all thanks to God for my KZbin. Glad I could help. You should watch the video where I convert mine to a Lithium battery.

[@becausestuffbreaks]

I can also relate to your frustrating. I recently broke the engine off my gas weed eater by swinging it like a baseball bat against a tree because it wouldn't start. Don't always have time to deal with things not working. My time is very valuable. Got 2 kids and 1 more on the way.

[@ToniTerrific]

@@becausestuffbreaks Well that speaks even better of you that with the challenges of your growing family still, you take the time to impart valuable info and instruction to others. I am a 63-year-old female determined not to allow a stroke prevent me from doing the tasks I still love to do. Hard work has always been rewarding for me. I thank you again and hope you will make more videos to help others with the necessary details so they can get on with life.

[@bobwilkinsonguitar6142]

I hope you both are doing well, this little exchange was somewhat inspiring :)

[@cheriharr4762]

Smart plan. I feel you on anger issues. I had severe mold toxin exposure in my previous house that effected my nervous system. I had a particular incident with my husband's gas powered weed eater. Needless to say the weed eater didn't survive. We got out of that house and slowly the anger went away. It's been a lot of work to get the mold out of my system.

[@marlenahirsch4338]

Thank you. I have restrung before listening to you. This is the first time restringing has worked. I am so glad. I could hardly believe it.

[@becausestuffbreaks]

Awesome! If you use the string I linked in the description, it will fix all the auto feed issues.

[@abbycooper7681]

As a brand new homeowner with zero lawn care experience, this video was a life saver. Thank you!

[@becausestuffbreaks]

Thanks! Just make sure you use the correct size string instead of the larger string like I did, or to make it easier you could just get the prestrung spools.

[@abbycooper7681]

I was able to find and use the correct size, and everything worked swimmingly! Thank you!

[@nonebusiness6583]

You can buy pre strung spools but they are kind of expensive and don't last long if you have a big job..

[@Apollo_Blaze]

So far the best video on this that I have found....you have a great way to show and talk about what you are doing and your voice is easy to listen to...I am now going to go watch the other shorter video you made about this...

[@lauras773]

BEST instructional video EVER! your clear and concise directions and your calm voice made it so easy for me to follow. I have severe hand arthritis so every movement really hurts. Watching your instructions helped me accomplish a painful task in minimal time. I’m looking forward to watching all your videos. Thank you so much!

[@becausestuffbreaks]

Thanks for watching! You can also buy prewound spools if you want to avoid the pain.

[@capper512]

I'm 72 YO & had never successfully loaded the string! Thanks for showing me how to do it!

[@becausestuffbreaks]

Use the string I linked in the description and it will fix all the auto feed issues. Thanks for watching!

[@fawzye22]

I had a model older than this one that I love. My sister has difficulty with tools that are too heavy and she actually loved mine and found it easy to use kzbin.infoUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG . This is a newer model but was even lighter which she really appreciates. She enjoys it and I no longer have to go to her house to trim as she can handle it fine. Haven't used it enough to comment on the battery life but lithium batteries last longer than the old style. Being cordless makes it easy to trim the far edges of the property. The entire yard can be trimmed with one charged battery.

[@beckigreen]

I just watched your video. I hope this works. I asked my Husband 2 weeks ago to do this, he didn't, so I'm doing it. Now I'm going in my yard to test it.

[@becausestuffbreaks]

Let me know how it works. I used the correct size string last time and worked much better.

[@willburr1786]

That’s whatsup, hopefully you’ve managed to subtlety shame his lazy ass with a sharp lookin’ lawn....every time he pulls up!

[@vibrationalkeys3320]

hey there :)

[@mjdokkjorp6053]

@@becausestuffbreaks so 1,6mm works better than 2,0? I bought 2,0 and it does not autofeed. After 20 times i gave up. Is the 2,0 the problem do you think?

[@becausestuffbreaks]

Here's the new video I made that fixes all the auto feed issues. kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@BigDaddyBakedPotato]

It's 2022 and this really helped me. My dad passed in May and I really dreaded having to figure this out. I appreciate the way you taught this and I got it in the first try. ❤️

[@becausestuffbreaks]

Sorry to hear about your dad. If you don't want to deal with wrapping it, you can buy rolls already wrapped. Here's a link to the sting I use that will fix all the auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@beverlyboo9075]

Mine did the same thing but I decided to take it out and put it back in with the arrow close to the hole I threaded the string through. Then it worked fine. Thanks for the video... I thought I was the only one who was having that problem.

[@becausestuffbreaks]

Below I linked my new video showing how I fixed all the issues I had during the previous video. I also found a string that works best that I will link below. Good Luck and Thanks for Watching! kzbin.info/www/bejne/bZ7Pk6muoJiDoc0 www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apap_HQdxPBv1B3BUQ

[@PhilipBrasch]

This was the most accurate video I watched to restring the spool. In the end, you say that you don't know why it is still not feeding properly. By watching a couple of other videos and then following your directions, the difference comes up at the very end. You mention locking the end of the string on the edge of the spool to prevent it from unwinding while it's inserted into the housing. That's mentioned in other videos and very necessary! But, right after the string is inserted through the final external hole and as the spool is seated into the housing, the end of the string should be released from the edge of the spool. Maybe that just didn't make it into the video. Mine fed perfectly following that procedure. I'm using the .065. Again, the video detail on attaching and winding the string was the best and I had no problems first wind! Thanks!

[@jackcollins77]

Right, the end of the string should be released from the edge of the spool.

[@cali4nian0rthside85]

I wasted half an hour trying to re fill the spool and your video solved my problem in a few minutes! Thank u!

[@becausestuffbreaks]

+Cali4nia N0rthSide what was your problem? Did you put the same size string on? Let me know if you have any issues with the auto feeding.

[@LPSbunnywishes33]

Cali4nia N0rthSide sane

[@caylebsrandomvideos3749]

Thank you so much! This video helped me reuse my disposable Black and Decker whipper snipper spools and it even helped me save money on new Black and Decker whipper snipper spools for more than $20 for only 3 spools that have only 30ft of whipper snipper line! I bought a package of 0.065in whipper snipper line that has 300ft of whipper snipper line for only $15.99. I could refill my spool up to like 10-12 times depending on how much line you put on the spool, plus it’s really easy to do!

[@becausestuffbreaks]

Awesome! Thanks for watching!

[@pgandy1]

Thanks. I have a B&D but not that model and have been fighting rewrapping the spool for years. I read the supplied instructions several times to no avail. The rewrapping went the smoothest ever.

[@becausestuffbreaks]

You're welcome. The link below is the string I use now and fixed all my auto feed issues: Maxpower 332265 Square Cut Commercial Grade Trimmer Line, Blue, Medium www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apanp_WNcIEGqeDYS9t

[@curtjohnson8020]

Justin, your honest teaching style was effective in re-stringing this edger. Thanks. I had trouble with the auto feed too for some mysterious reason (s).

[@becausestuffbreaks]

Please watch my newest video, I'll link below. I have all the auto feeding issues figured out and explain how to do it right. kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@MinervaAlvarez-dx3jc]

​​@@becausestuffbreaks one of your last steps was incorrect. You don't restring it through the other plastic cinch. The other hole and cinch is left for if the first hole and cinch gets too loose and stops holding the string. You even mention how after you do it your method, you have to manually pull the string through because it doesn't feed anymore. That's because after you wind it up you are just supposed to put through the final metal hole that feeds out and click it in. I actually wasted 2 spools on your method, the tension of threading it through the second plastic conch at the end made those areas ragged. It gave me the same problem where it wouldn't auto-feed. I had to watch other videos to realize you aren't supposed to have it feeding out of the backup plastic cinch. If anybody sees my comment, please refer to other references because he messes up a step. With all respect and fairness, I had to point it out.

[@becausestuffbreaks]

@@MinervaAlvarez-dx3jc can you time stamp what I messed up? I'm having a hard time understanding what you mean. I figured out the autofeed problem was the string size. Everything worked perfectly after I put the correct string in. I put a link in the description of what string I used to fix the auto feed problem and I made a new video explaining my error and linked that in the description as well.

[@PJG1710]

Enjoyed the video... Took my time restringing the spools. In the past I would do it in my garage..Hot, and I was tired. This time I did 6 on my couch in the AC watching golf and took my time. Ran the feed around the spool tight and did that 2x per spool. The real test will be when I go use it, hoping the auto feed work without any issues.

[@becausestuffbreaks]

I switched to this string and it fixed all my problems: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@cathymaywoo550]

Just spent a couple of hours trying to figure out feed issues with my B&D weed whacker. So frustrating. So "line feed" success of the weed whacker is impacted by the flexibility of the line. Who knew?! So if the manufacturers change the specs of the line itself, the performance of the weed whacker is impacted. I never would have guessed that I would have to let the line sit wound on the spool for a day before operating the machine. I wonder if that has always been the case. It would have been a long time before I figured it out. I've used weed whackers for years and never had much trouble until recently. I don't shop Amazon, so I hope I can find the line you are recommending elsewhere. Thanks for the tips. Very helpful. I don't know how we ever got along without KZbin.

[@becausestuffbreaks]

Here's the string I recommend that fixed all my auto feed issues Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@MsLee-oh7hy]

Thank you for making this video. My mom came to me with an empty spool. Not sure why, but whatever. Thanks to you I refilled the spool with the correct tools.

[@becausestuffbreaks]

Cool. You can also just buy prewrapped spools if you didn't know. Thanks for watching!

[@jimf]

Nice video! I almost gave up on my 0.08" line until I watched the correct way to feed the line unto the spool. Works fine.

[@analauris85]

THANK YOU, everyone else's videos didn't help because my machine is different (and like yours).. so really appreaciated this

[@becausestuffbreaks]

Awesome! Watch my video on how to convert this to a lithium battery. Makes it last a LOT longer.

[@kikasantomingo]

This is EXACTLY what happened to me… 🎉

[@becausestuffbreaks]

​@@kikasantomingoyou should watch my updated video I'll link here. Buy and use the string I linked in the description for best at auto feeding. kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@artyd7734]

thankyou i saved alot restringing i bought 200ft of .065 shakespeare balistic twist commercial grade trimmer line at tractor supply and so far it working great

[@becausestuffbreaks]

Awesome! Thanks for watching!

[@Crazycro905]

Thanks for sharing, I am going to try this. I was very kinda pissed off a little at black and decker thinking I would have to spend 20 dollars buying new string when I can get 100 ft for 5 dollars. I will give this a try, really need to trim and edge my yard

[@becausestuffbreaks]

Make sure to use the correct size string and not the size I used

[@denniskelley8974]

This helped a lot. I was having trouble restringing this thing, but you helped me figure out what was causing my problems. It was two things. First, that stupid little hole wasn't big enough to take the new string I got, which was a little thicker than the original. All this time, all I needed to do was make the hole a little bigger? Yep, I did what you did and it then worked fine. But what REALLY helped me was the second tip I picked up from your video: Must play death metal while working on this thing! So now, yeah... I iz a pro!

[@becausestuffbreaks]

Lol, thanks for watching!

[@colleencarr3470]

Thx for your help. I have a different model & my spool is black n decker & it has a groove on the inside that U slide the string into initially. It does not load from the top. That May make a difference.

[@becausestuffbreaks]

You stick it into a hole in the top and then thread it down into the spool from a notch and that locks it. I show that in the video, right?

[@mrbusdriversir]

I used the same .080 halfway full and the auto-feed worked perfectly. Thanks for sharing this.

[@becausestuffbreaks]

That's good. Do you have a brand and model of string you used?

[@mrbusdriversir]

Justin Peters I used Craftsman Smart Advance Trimer Line 0.80 I had laying around. Not sure if you can still buy it since Sears is now gone.

[@mrbusdriversir]

Justin Peters just checked and you can buy it on Amazon. I used the 85940

[@becausestuffbreaks]

Thanks for the info. I'll have to try it. I just bought a new brand and tried it today and LOVED IT! I think I'll make a review video on it. No auto feed issue and very durable. Here's the one I just bought: www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@mrbusdriversir]

Justin Peters Awesome! Thanks

[@jamesclark6142]

This was very helpful. Thank you! Additionally, your choice of music was excellent...

[@becausestuffbreaks]

Awesome! Made the music myself. Thanks for watching!

[@brownfoodgood1381]

Thank you so much for this! I restrung mine for the first time and it wasn't feeding. From you video, I learned that I wound it the wrong way. Working great now!

[@becausestuffbreaks]

I made a better video after doing it a while and perfecting the process. I found a few things that made it feed better. I'll link it below. kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@monicamantilla4711]

Thank you so much is my first time with pobre string black and decker even when I thought I knew how your video made it easy. Thank you again.

[@becausestuffbreaks]

Use this string and it will fix all the auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@sheri023]

Thanks. I've strung these weed eaters every spring and knew I was prob doing it wrong, though it worked, I'm glad to know how to do it right. Thanks for showing.

[@becausestuffbreaks]

How were you doing it?

[@t3chninja_official]

I use my drill, a large drillbit, gob some blue painters tape on and make the spool fit and somewhat center it. Then once you get it started use the drill to wind it on the spool. Super fast! It comes out of the bulk holder really fast too.

[@becausestuffbreaks]

That's awesome! I think I'll try that.

[@mattypea8820]

Worked great for me. Thanks!

[@alj521]

great instructive video.......have a happy fathers day!!!

[@becausestuffbreaks]

Thanks! Make sure to use the string I linked in the video and it will fix all the auto feed issues

[@ThymeBottle]

It is helpful to 'paint' the arrows showing the direction to wind. I use red or orange fingernail polish. Thanks for the video, and suggestion for the line size and brand.

[@becausestuffbreaks]

Good tip. Thanks for watching!

[@robertschworm6036]

This is a known problem by hundreds of users. If the spool is hard to pop on over the center spindle, it expands when heated up by use and grips onto the spindle. Use we40 on the spiindle or slight sanding on the inside of the spool so it slips on easier and has a bit more play over the spindle. WaLLA - fixed!!!! Bob

[@becausestuffbreaks]

Never had that problem. But now I know what to do if I have that problem. Thanks!

[@aeb4au]

Thank you for this video! I had problems with the autofeed as well. I restrung like you did and no problems since!

[@mahakavi12]

Should we play the same heavy metal band while stringing?

[@becausestuffbreaks]

It's highly recommend, lol. Thanks for watching!

[@johnnybgood8779]

You’re hired. Faster than Mach 8. Wow.

[@becausestuffbreaks]

Lol. Use this string and it will fix all the auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@austinkoch2791]

I have no idea what I'm doing wrong I am having an issue with it feeding too much constantly and wrapping itself around the Wacker after it becomes usually long enough to cut me first

[@becausestuffbreaks]

Might just be the type of string or you spooled it backwards. Try this string. Fixed all my auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@vickigardner9014]

Thanks for the video, every year I need a little reminder! :)

[@becausestuffbreaks]

I made a better video. Here it is: kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@JohnnyPoker]

Thank you very much for making this video man lol The music during the winding was killer !

[@becausestuffbreaks]

Lol, thanks for watching.

[@DavinaMealoha]

I been trying to restring my electric Black and Decker for the last hour and I have both size lines you have. Just gonna go with .065 for now cause not sure if I can make those holes as well as you. But thank you so much for sharing and helping me. Really appreciate it. Happy Holidays to you and your Ohana! God bless...

[@becausestuffbreaks]

+Keone Kamalani thanks! Have a Merry Christmas!

[@Onlybhstrpes]

Dude, thanks... saved me a lot of trouble

[@becausestuffbreaks]

Use this string and it will fix all your auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@lmateobonilla]

I'm going to trying this on the weekend. The regular line breaks too fast with the type of grass I have here. Maybe a thicker line will work better for me. Thank you for an amazing video!

[@becausestuffbreaks]

Awesome! Use the string I linked below. It lasts a very long time and it auto feeds perfectly. Maxpower 332265 Square Cut Commercial Grade Trimmer Line, Blue, Medium www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apanp_LWkJ3CgHka5fp

[@HouseRLS]

Great video! I ended up picking up a similar .080 weed eater string in a 100ft roll. Just restrung one of my spools and can't wait to go out and try it out!

[@becausestuffbreaks]

Let me know how it works for you. Thanks for watching!

[@dkturner10]

Thanks for sharing. I have a spool of .096 but sounds like it will work. Save a lot of money and last longer. I subscribed. You have helped enough people to fill up 7.68 Georgia Domes. wow! Capacity well was 60K

[@becausestuffbreaks]

It might work but you'll probably have auto feed issues. I use the string I linked below and I have no auto feed issues and it lasts a long time. Maxpower 332265 Square Cut Commercial Grade Trimmer Line, Blue, Medium www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apanp_Ve3exNqXvOmcJ

[@Andybruff]

Mine autofed too fast when I restrung mine. I’m gonna try again

[@becausestuffbreaks]

Use this string and it will solve all your problems: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@bevtaggart1406]

Can't tell you how many times I've dropped it just as I've finished winding it! 😮

[@becausestuffbreaks]

I know how you feel

[@Manutdreds10]

Thanks, man. People like you make this BS more bearable.

[@becausestuffbreaks]

Glad I could help. Here's a newer video I made where I show how to do it and have less feeding issues. kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@mandimoran6259]

Good video! You're pretty mellow man I like it. And cool shirt too!!!

[@becausestuffbreaks]

Thanks and thanks! Hope you liked the music also. Made it myself, lol. Thanks for watching!

[@GypsyoftheSun]

Wish me luck 😁 I followed your instructions to a T 💪

[@becausestuffbreaks]

I found a fix to my auto feed issues. Just use this string and it will feed perfectly. It also helps to let it sit over night after wrapping it. www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apap_J6MLdCpgElZU7

[@GypsyoftheSun]

@@becausestuffbreaks Thank you very much! I think the little actuator arm with the tiny brass tit has to be pushed to the outer position then you place the spool in the housing. I hope that makes sense🤣

[@becausestuffbreaks]

@@GypsyoftheSun lol, I'll have to go look to see what you're talking about. That string I linked in the previous comment works perfect and lasts a long time.

[@GypsyoftheSun]

@@becausestuffbreaks I'll definitely be getting some and thank you again!

[@becausestuffbreaks]

Sorry to keep replying, but do you have an 18v or 20v Lion?

[@geezer6325]

Thanks for the video. The little lever inside the spool shroud came off and I cannot figure out which way it faces. Can you explain that little lever.

[@brennaklaverkamp2690]

Thanks for this helpful video! I also managed to find biodegradable line to thread the spool with, which is a bonus.

[@becausestuffbreaks]

Sweet! Thanks for watching!

[@bamwa]

I was wondering about that. Plastic in the environment sucks.

[@infracorreo]

Ty man =) Just did the same procedure here in Costa Rica.

[@becausestuffbreaks]

You're welcome. Use this string and it will fix all the auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@heavymetalmadness666]

Okay I just tried the .080 Grass Gator and is working pretty well vs. the .065 string Black and Decker calls for of the same brand doesn't work, just feeds though fast. The Grass Gator is 3d and might weight less than the solid equivalent , or equal to .065 at .080. How ever that system works it must work off the weight of the line

[@becausestuffbreaks]

Interesting. Thanks for sharing. I made a new video with new string and method that fixed my auto feed issue. Here's the link: kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@fernandotovar6244]

When inserting the spool where is the black clutch go inward or outward in the cavity

[@becausestuffbreaks]

Mine is outward. I took a picture of it and posted it on my MeWe public group. Free to join MeWe and here's the link to the group: mewe.com/join/shareyourtrade

[@mml1224]

great job, i subs'd. did wat u said, still having issues with auto feeding, i wound it tight, but i have 2 take cover off and manually do, do i hav to il some of the components or inspect them, strange?

[@muzzykara9336]

Aren't these suppose to auto feed?... Okm you mentioned it towards the end. Not sure about yours, but the one I have looks very similar but it has a double edgebdor cutting.

[@becausestuffbreaks]

You must have a different attachment. I didn't know it had that accessory available. Thanks for watching!

[@Iamavale]

Mine has a feed button and it isnt releasing line when i press the feed button. What am i doing wrong?

[@smalltownpicker]

I guess this is cheaper? My b&d quit auto feeding so I bought a ryobi that’s similar. I wonder if I could do the same thing with their spool that comes with it? What ya think?

[@becausestuffbreaks]

I bet you can. Just match the size of the string. After you string the spool, let it sit for a day so it holds in place and doesn't unwind too much when it auto feeds. Let me know how it goes.

[@nonebusiness6583]

Thanks for the tips. I was hoping you had a faster way to string it. It's quite tedious. If you don't get the rows level, I think this is why it stops continually and I have to remove the cap and reset the string. Yes. You can buy pre strung spools and move on smoothly but they are expensive compared to re stringing your own. Plus if you have a large job, they don't last long.

[@becausestuffbreaks]

I used this string and it fixed all the problems. I didn't even need to make it in neet rows. Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@iktomi5]

It helped a great deal. Not quite same head spool etc but your instructions gave me the energy 2 think!!!! lol Gooo on friend

[@becausestuffbreaks]

Thanks and thanks for watching!

[@jjmturbo]

My autofeed is doing the opposite. Just spits out line non stop..any suggestions?

[@becausestuffbreaks]

Look inside the spool housing. See if that little switch/lever is there

[@pcofranc]

Enjoyed your video. I found it is best to stay with the original thickness 0.065". I made a video of an older design from b&d and found I needed to wind opposite direction of the arrow. You are right that the string must be wound tightly like the factory or it will not auto feed correctly.

[@clairmarie3130]

Thank you! Lent my weedwhacker to neighbor who restrung it and it was all messed up. So going to give this a try! I have a jungle to cut through...😆

[@becausestuffbreaks]

Make sure to watch my newest video on how to do it. I clear up all the issues I had.

[@furries_and_friends_designs]

Totally helped; thank you so much 👏😁

[@becausestuffbreaks]

Glad I could help. Thanks for watching!

[@lynnzoo2238]

I could not get mine to work. I could not see where you started from, putting the line in the holder.

[@becausestuffbreaks]

Here's a better video I made doing this: kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@seanwentzell4931]

Thanks for this vid. It helped a lot.

[@becausestuffbreaks]

Use this string and it will fix all the auto feed problems. Thanks for watching!

[@carlogarcia209]

Just curious since I don't see it on here what type of string would work for the Black and Decker LST201?

[@becausestuffbreaks]

Uses the .065" and I've had the best luck with the string linked below. As an Amazon Associate I earn from qualifying purchases if you use my link. www.amazon.com/dp/B001JQC476/ref=cm_sw_r_as_gl_apa_gl_i_R3G1WNAQ5SGJ43HYFN01?linkCode=ml1&tag=justind.peter-20

[@4TIMESAYEAR]

I don't want it coming out automatically. Went through a whole spool the first time I used the thing. Had to keep it from auto feeding and if I need more, I remove the head and ease some out.

[@becausestuffbreaks]

I remade this video and linked it in the video at the end. What I found, to get it to autofeed correctly, is to use the correct size string, use 4 wraps around the spool, and let the spool sit for a day before using it.

[@robertbissett]

Zacly what I do. The spool it came with autofed way too fast. Tried many hacks to avoid buying a new prewound or winding myself. Nothing worked.

[@becausestuffbreaks]

Here's the new video and what I did to fix the auto feed issue when winding it myself. Here's the link: kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@BrianShinn]

Where do you buy the cartridges for Black & Decker trimmer 30000

[@becausestuffbreaks]

Not sure what model that is, but this might work: amzn.to/3zs71UU

[@lalbright4473]

like the musical background!!!

[@becausestuffbreaks]

Lol, thanks. Made it myself.

[@clairgervais7503]

Can you use a wire in place of the thread??

[@becausestuffbreaks]

Hmm. Sounds like a fun experiment. Let me know if you try it.

[@clairgervais7503]

@@becausestuffbreaks TY for getting back to me. I can't see why not. :)

[@becausestuffbreaks]

I might have to try it and make a video of it

[@clairgervais7503]

@@becausestuffbreaks I was thinking, maybe what might happen is if you accidentally hit something hard like a stone, it might break the plastic inside that it's attached to, where the string would just break and not damage the spool area.

[@clairgervais7503]

I love people that think outside "the box". :)

[@Dons166]

No trouble with string feeding with the heavier string?

[@becausestuffbreaks]

The thicker string is the cause of the auto feed issues. I linked the string in the description that fixed all my auto feed issues.

[@kennythompson5863]

Mine will only auto feed in the trimming setting. Not the edging setting. Something about that head being flat

[@becausestuffbreaks]

This string fixed all my problems: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@sweetczz]

It sucks that you don't do a close up of the spool insertion and which part of the spool is top or bottom. It seems to me that the fancy side goes against the inside but the string is too awkward I can't see how it could work properly.

[@becausestuffbreaks]

I've perfected it and figured out how to get the auto feed to work correctly. I'm going to remake the video and I'll include a close up. The side with the gears goes towards the weed eater.

[@sweetczz]

@@becausestuffbreaks thanks. I did rewind ⏪ it and for some reason it worked. It didn't look any differently than the first time, lol

[@ac_tv2050]

What will happen if I didn't restring that way?

[@becausestuffbreaks]

Do it and tell me.

[@juanitaloomis6553]

Thank you so much I haven’t done this in years(I’m 82) appreciate the refresher course🥰

[@Nicoler2057]

I used a thicker line on mine and I can’t get it to auto feed I have to put it up take the cap off and feed it through myself. Must be the line thickness

[@toughleo101lv]

It might be.

[@onesmoovealpha]

The problem likely is the spool can't feed because it's too tight initially. Use less string next time.

[@AffordBindEquipment]

you didn't show the part where you drop it and have to start all over again...

[@becausestuffbreaks]

Lol, too many bad words said when that happened. Had to cut it out.

[@AffordBindEquipment]

@@becausestuffbreaks I thought about making a simple spool winder out of wood so that can't happen...

[@jdmstyleh22a]

Thank u! Been trying to figure this out for my mom for awhile now

[@amydavis4029]

Great job! Thank you. I am going to try and restring mine now!

[@becausestuffbreaks]

Please watch my newest video first. I'll link it below and I figured out all the auto feed problems. kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@erynlasgalen1949]

I always restring my line, and with my Black & Decker electric (with a cord) I've been having problems with the autofeed. I thought I was doing it wrong, but I guess not. I 'm using the blue line that came with the machine. I have another cordless string trimmer with green line and don't seem to have that problem. Go figure.

[@becausestuffbreaks]

I had some time to perfect the process that fixes the auto feed issue and made it into a new video. Here's the link: kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@erynlasgalen1949]

@@becausestuffbreaks Thank you very much!

[@00708046]

It only happened 4 or 5 times when it ran out of string but I don't know because it only happened once ????

[@becausestuffbreaks]

Just use this string and it will fix all the problems: www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apap_xOOqTUq2wLFu9

[@jenibrown9813]

Thanks Saved the day.😊

[@becausestuffbreaks]

Awesome! Thanks for watching!

[@zehuazhou3390]

I restrung and then the auto feed kept feeding more and more strings every few seconds. Could you tell me how to control the pace it feeds?

[@becausestuffbreaks]

Yep. Just use the string I linked below and it will solve all your problems. Also helps to let the spool sit for a day after stringing to overcome some of the elastic memory in it. Let me know if that fixes it. Thanks for watching! www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apap_mz3GJefoAKzQx

[@Forklift_Fella]

Not only will using larger line cause feed issues but it can actually damage your equipment. If you want a better line solution switch to commercial grade trimmer line. I use MaxiEDGE .065. Try to avoid square lines as they can cause feed issues as well.

[@becausestuffbreaks]

I use this string and it fixed all my problems and lasts a very long time: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@diantt1931]

I needed the hole adjustment tip (despite what John Fuller says. LOL). The hardware nearest me only stocks thicker lines for gas trimmers. And the other one a little further away had for electric trimmers but they buy giant reels and pre-cut them in shorter lengths for sale. And the sales lady had no info on what thickness it actually was. So I had a hell of a time trying to thread the thing. A comparison between what the trimmer came with and what I got now doesn't seem too great - since I had a hell of a time trying to get out the previous bit too - haha.

[@becausestuffbreaks]

Did you get it to work?

[@diantt1931]

@@becausestuffbreaks I got it threaded - yes thanks. I had one of those small pointy scissors handy, I just stuck in one of the blades and rotated it with just a very little bit of pressure and it worked just fine. Time will tell if I get auto feed issues or not. Even if I do at least I will be able to continue using my trimmer!

[@becausestuffbreaks]

Thanks for watching!

[@kathrynkenyon785]

Ok, great vid but MY PROBLEM is that the actual black spool that you wrap the new spool onto is stuck on. How do I get that off? Thanks

[@becausestuffbreaks]

Never had one get stuck so not sure how. Sorry.

[@ae3832]

Thanks for the great video.

[@becausestuffbreaks]

Use this sting and it will have no auto feed problems: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@robertschworm6036]

I see your line is .065, while mine is .080. What caought my eye was the fact that the line was still in the side notch when you connected the head back up. Perhaps you gave the line a good tug and it pulled itself out of that side notch? Anyway, that is the idea. Yes, it is important to use the right gage line. Bob S

[@becausestuffbreaks]

I thought I showed that in the video, but yes, I pulled the string out of the notch in the spool.

[@borjealsbraden9874]

Thanks for the video Justin. Specifically, the manufacturer said only use .065 on my weed string trimmer. But, like you, i want to use .080 bec its stronger and lasts longer. I have no issue at all using .065. Runs smooth, feeding automatically. BUT its eating up line so quick, so, i have buy more of it. Thats the only issue. I used .080 like what you did on your video and how you did it. Yes, its working, yes, its not eating lots of line but also have to manually feed it. I saw on other video, they made the whole bigger on the spindle. They said it worked. Im not ready yet for that. Im scared that maybe making a bigger hole on the spindle will F it up.

[@becausestuffbreaks]

I found the perfect string. Auto feeds perfect and lasts a long time: Maxpower 332265 Square Cut Commercial Grade Trimmer Line, Blue, Medium www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apanp_CubdmdeWgLbBJ

[@becausestuffbreaks]

@@borjealsbraden9874 I found the perfect string. It auto feeds correctly and lasts a long time: Maxpower 332265 Square Cut Commercial Grade Trimmer Line, Blue, Medium www.amazon.com/dp/B001JQC476/ref=cm_sw_r_cp_apanp_CubdmdeWgLbBJ

[@borjealsbraden9874]

@@becausestuffbreaks thanks you so much

[@bendaves77]

Bout time someone does a how to video that's worth a shit and has some kickass music during fast forward time

[@becausestuffbreaks]

Lol, thanks! I made the music myself on a keyboard. I was mostly getting negative feedback on my music so I stopped adding it.

[@johnfuller2874]

The string you are using is too big if enlarging the hole in the first step is necessary. Also, you didn't remove the end of the string from the slot to temporarily hold it from unraveling before inserting the disc into trimmer base. That, along with using a string too big keeps it from auto feeding.

[@aaclar]

Im having issues auto feeding with the manufacturers spools and recommended size its insane what donyou recommend? I was going to try the video suggestions

[@becausestuffbreaks]

I got the auto feed issue fixed and made a new video explaining it all. I'll link it below. Thanks for watching! kzbin.info/www/bejne/bZ7Pk6muoJiDoc0

[@aaclar]

@@becausestuffbreaks Awesome thanks for the quick reply

[@marjoriebaldwin6281]

My problem is mine auto feeds too fast, is it not tight enough?

[@becausestuffbreaks]

Does it feed normal with a prewrapped spool? I noticed mine feeds too much when I use the correct size string. Might have to just keep trying different kinds of string till we find what works best.

[@toastrecon]

Mine fed okay with the original spool, but when I went to re-wind it with replacement string (same diameter as original), it feeds like crazy, and throws little bits of string everywhere. The only thing I can do is stop when it does that (usually after 20 seconds) and turn the spool back a bit. Pretty useless. I may try winding the string in the "wrong" direction, or move up to another size. I also didn't wind it as tightly as Justin did, but I figured that it wouldn't make that big of a difference once the spool wasn't full, anyway?

[@illegallyblonde232]

I don't know who u are but thank u 💓

[@becausestuffbreaks]

You're welcome! Thanks for watching! Use this string and it will fix all the auto feed issues: Maxpower 332265 Square Cut... www.amazon.com/dp/B001JQC476?ref=ppx_pop_mob_ap_share

[@illegallyblonde232]

@@becausestuffbreaks I watched that too and subbed. Thanks again

[@becausestuffbreaks]

Thanks for the sub! Feel free to reach out with any questions.

[@fredoaks6375]

I do not understand why you didn't use the right size of string, .065", as the manual recommends, instead of .08". What's the point?

[@becausestuffbreaks]

I just had that size around. Didn't feel like buying more. Cheap+Lazy=This

[@tamarakennedy4976]

The commercials constantly interrupting watching these videos dont make me want to buy those products instead they urge me to NEVER BUY THE PRODUCTS THE INTRUSIVE COMMERCIALS ADVERTISE...WAY TO GO KZbin...I WILL NEVER PAY FOR YOUR C9MMERCIAL FREE VIDEOS INSTEAD I PROMISE TO NEVER AGAIN PURCHASE THE GREEDY COMPANIES THAT ARE OKAY WITH RUINING THE VIEWERS ABILITY TO WATCH COMMERCIAL FREE TUTORIALS BECAUSE WE ARE TOO BROKE TO HIRE SOMEONE ELSE TO DO THESE TASKS.... thank you to the maker of TGIS video I am subscribed now and thank you for making such a clear perfect to the point video...I have been bombarded with three videos just since I started typing this...holy shit.have a good one buddy.

[@diorama_dad]

Just download UBlock Origin. Problem solved.

[@17fourU]

I'm pretty mechanically inclined, Except for Installing String on Trimmers...smh..This helped a lot as i have the exact same trimmer. Thanks!

[@becausestuffbreaks]

Thanks for watching. Just make sure to use the correct size and not oversized like I did. Auto feed works better.

[@marka1839]

The line needs to be wound in the opposite direction of the arrow, the same way as the prewound ones are. The arrow shows direction of rotation. Feeds easier loaded anticlockwise.

[@becausestuffbreaks]

I thought I was doing it the same as the prewound ones. I'll look into it.

[@rayneedaebluz]

@@becausestuffbreaks you're doing it right and thank you for the great upload !

[@becausestuffbreaks]

Thanks for watching! I also confirmed I did it right.

[@queeneywarren681]

I try this, just wonderful. Thanks for the video you explain it very well.

[@melissagomez2753]

I replaced the spool on my GH900 trimmer and the spool keeps unraveling every time I try and use it. I got it to work correctly for about 15 minutes and then it unraveled again. I even put in a new spool, hoping that might solve the problem. Is there something I'm doing wrong?

[@becausestuffbreaks]

Maybe you put it in upside down or the locking mechanism for it isn't working.