RetraxPro XR tonneau cover full review *Ram 2500

[@eljefe519]

I had the Retrax XR and it warped when the temperatures were below freezing. This made it seize up and not able to close unless I manually pushed down on the middle of the cover. When the temps went back up to around 40 during the day, it worked as expected. There was no permanent damage but it was a PITA to have to find the right spot to push down on so that it would retract. I’m hoping the Pro doesn’t have the same problem because I like to lock at any position and the tracks for rails.

[@GReviewz]

Thanks for watching.. I live in Nc so we do get cold weather but not as cold as some parts. I can promise I have not had a single problem with warping or seizing up. The place I got the cover from told me of those problems with the plastic model.. that is why I spent the extra $ and went for the pro. You will not be let down by the pro.

[@Kaiser333333]

Thanks for this info, i am considering a move to Alaska in the next 6 months and looking for truck bed covers at the same time. it does get to 0 F occasionally. I am leaning towards DiamondBack for these reasons (my criteria are locable storage and ability to put kayaks racks on top).

[@scottdowner6342]

This is the best review I've seen anybody else is got out there.

[@GReviewz]

Thanks for watching and for the positive feedback! Are in the market for tonneau cover? Please like and subscribe.

[@scotttidwell9617]

Great video, better than dealers !!! Have been researching retractable covers for a couple of weeks trying to find answers to my check lists and you covered them in one video ! Had narrowed it to retrax pro and roll-n-lock. Wanted rails for future use as well so you also covered that ! Thanks for posting the video 👍

[@GReviewz]

Thanks for watching and for the positive feedback. I looked for along time as well and the retrax check more of my boxes than any other unit on the market. Some were better at one thing but this was best all around..what kind of truck do you have?

[@koalafan1576]

I love the Lietner rack that goes with that but I don’t know what boxes you need checked.

[@GReviewz]

I’ve looked at that rack and it is at the top of my list..

[@koalafan1576]

I’m trying to save up to get the electric one. For now I have a cheap roll up one on the way.

[@GReviewz]

The electric one is nice but I did not want to add complexity and a potential breaking point.

[@chrisgilbert2503]

Nice video. Yours is one of the few videos where you actually did some measurements, which is important. Thank you.

[@GReviewz]

Thanks for watching…I try my best to give a full review. I appreciate the comment. Which other tonneaus are you looking at?

[@chrisgilbert2503]

@@GReviewz I’m also looking at the Mountain Top retractable cover. I like that the canister is smaller, but I don’t like that you need to screws to attach it. I need one that I can take off occasionally. I’ve heard that the Retrax can be removed, but it is not easy. I haul stuff once in a while where I need the full bed. I’m also looking at the Lomax, which appears pretty easy to remove. Thank you.

[@markjohnston8661]

Didn’t realize there were so many truck driving English majors viewing KZbin videos… geez lol I had to give you another view to see how many ok’s you used. So it helped get another view at least! 👍 I appreciate the content of the review! Thanks for sharing!!!

[@GReviewz]

Thanks for watching. Yes I do say okay a lot. I train people for a living and ask people “ok” do you understand a lot. So I say it a lot in videos.. my bad. Are you in the market for a tonneau cover?

[@christophersboland]

Good video - great follow-up from your initial install video. It's interesting that I can't seem to find a video on a 2019 RAM 2500 Longbed with this tonneau cover. I'm going to speak with a dealer tomorrow about this Pro XR. Thanks again.

[@GReviewz]

Thanks for watching both my videos on the cover. I really love it. Again only downfall I can see is the canister taking up some bed. I have seen these covers on 8’ beads towing 5th wheels…please consider subscribing…

[@uncle-andy-guitar-herbst]

Drove my 2018 F150 with 8-ft bed from Illinois to Seattle and back a couple weeks ago, camped on the Olympic Peninsula. Woulda been nice to have this instead of having all our crud in totes or exposed, like our firewood. I'm gonna look into one of these. BTW, Seattle to Peoria, 2066 miles, in 35 hours, shaved off 4 hours from my last trip. Good video man, helped me out, thanks for sharing it.

[@GReviewz]

Thank you so much for watching and for the positive feedback. Yeah I love this cover. Like I did only drawback is the canister takes up some room and the price. But your 8ft bed has room for days!

[@uncle-andy-guitar-herbst]

Yeah, lotsa room back there, and I can still put some plywood and drywall back there from time to time. I just went to a local truck topper place and ordered a Retrax Pro MX straight from the factory. I'll have them install it too, I'm gettin' to old and lazy for that. ha ha

[@GReviewz]

Man I hope you enjoy it. I’m still young and have a decent back left but I’ll be there one day I’m sure..

[@danielpeters1754]

Im sold you got a new subscriber too! Thanks for the indepth review. Time to save!

[@GReviewz]

Thank you for the sub and awesome comment.. I’m glad you like our channel!!

[@WAHOOZ]

Great video and very helpful. I can't decide between the Retrax Pro XR or BakFlip X4s. This will be for a RAM TRX so the bed is shorter, 5'7". If you were in my position, would you still choose Retrax?

[@GReviewz]

Thanks for watching. Great question. I love my retrax. I was really thinking about the backflip mx4 as well. I found that if you search ram groups in general people complain about longevity with the bakflips . They don’t hold up maybe a couple years. The retrax is a lifetime warranty. And much more durable. However the canister does take up some space. If you use your bed a lot I’d say go the backflip route. If you want something that will last for year and be more secure overall the retrax is a better bet..

[@WAHOOZ]

Thanks for the reply. I am leaning towards the Retrax since I won’t be using the bed much.

[@commanderinsleep2779]

Just got mine last week for my Zr2! I’m so glad I got the XR instead of the MX so many future things you can do with the track system!

[@GReviewz]

Thanks for watching. Exactly, haveing that track system is so nice and kind of makes the tonneau future proof to a certain degree. Man the zr2 is a nice a truck. Did you go gas or diesel?

[@commanderinsleep2779]

@@GReviewz Got the gas the diesel is a bit more expensive.

[@GReviewz]

Yeah the gas is faster and can tow more I believe the diesel is all about better mpg. As you can see I went had as well on my truck. Do you have any mods?

[@commanderinsleep2779]

@@GReviewz yea all I did was get the retrax and tinted my widows it come off road ready! I’ll keep adding different things eventually!

[@mrcornchip]

Sweet video. Thinking this will be my next bed cover. Wondering if you know if they are compatible with back racks/ any headache rack

[@GReviewz]

That is a great question. If I were you I would email retrax directly and ask, however anything will fit on the retrax that is t-slot mountable..

[@GReviewz]

Hey I just found this article for you. I’d start here… www.ford-trucks.com/forums/1533180-magnum-headache-rack-with-a-metal-tonneau-cover.html

[@scottboland59]

Any updates? Just curious if you are still happy wit the cover

[@GReviewz]

Still no complaints. Just the con I mentioned in the video of the canister taking up more room than I would have liked but I pack in accordance..

[@scottboland59]

@@GReviewz Awesome, I had a tri fold on my last truck and I liked it, but I am very interested in the retrax for my new Silverado.

[@MotoMatt418]

If you had the smaller bed size then which option would you go for of those you were considering? That’s the predicament I’m in. Losing bed space is a real bummer. Love this cover though. Great review.

[@GReviewz]

If I had a smaller bed like the 5’7 I most likely would have gone with the bak industries mx4. It’s the tri fold flip cover.. it’s not as strong and durable as this cover but I couldn’t give up anymore bed on the already short bed.. however the canister is smaller from my understanding on a shorter bed cover..what kind of truck do you have?

[@MotoMatt418]

@@GReviewz Thanks for the reply! I have a 2017 RAM 1500.

[@jedinaiit2345]

@@MotoMatt418 did you check out the Peragon?? It’s pretty legit looking. I have it narrowed down to this one and the Peragon

[@seandooley4881]

I would like to know how it compares to the Pace Edwards Ultragroove Metal since that is the closest competitor and your supplier is also a Leer dealer.

[@GReviewz]

The retrax from what I e researched said that retrax made the design originally and the pace edwards essentially copied the design. It’s very close. The P E costs less. I’m not sure on the warranty you get but the retrax is lifetime warranty..

[@Domino7581]

Just ordered one for my 2017 Ram 1500 limited. With rails, & basket From rhino .

[@GReviewz]

Thanks for watching! Sounds like an awesome setup! I was super close to getting g a 1500 rebel! Which basket did you get?

[@31adrock]

highly considering this exact cover. towards end of video (after you're standing on it) where you show how one can open & close without having to open tailgate, there's a good amount of water in the bed and your cover is shut. how did all of that water get in?

[@GReviewz]

Thanks for watching. Overall this tonneau cover is very water resistant, No tonneau is completely waterproof except maybe the one piece clamshell style ones.. that is we’re if any water gets in the system we’re the tailgate meets the tonneau…water sits in the lip and when you open the tailgate or tonneau it gets into the bed at the very back…overall I am still very happy with the cover!

[@TCinSoCal]

Great video. Thank you. I’m torn between this and the Bak Revolver. Seems the canister is the price you pay for being able to load stuff on top of the cover. I have to assess how much of that I need vs needing all of my (already shorter) bed. Gorgeous.. & badass truck!!

[@GReviewz]

Thanks for watching. I looked at the bak products. They are my 2nd choice. Yeah the canister is literially the only downfall to my tonneau. Well the price also!

[@mikemcmillen1253]

Hi, did you consider painting the clamps black?

[@GReviewz]

Thanks for watching. Are you referring to the silver clamps that hold the tonneau to the bedside?

[@mikemcmillen1253]

@@GReviewz yes

[@koalafan1576]

At least yours stays dry. I’ve seen one other review of this where water leaks on the sides and at the tailgate.

[@GReviewz]

Nothing is going to be waterproof, except maybe a topper. Some water gets on by it isn’t bad at all.

[@jedinaiit2345]

What were the cons for you on the Peragon? I’ve narrowed it down to Peragon and Retrax for a bed cover

[@GReviewz]

Thanks for watching. I looked into the paragon. My friend used to have one. If you watch the videos on the paragon it shows the opening mechanism of pushing the panels down into the bed to get the tonneau to open. That is fine with an open bed bed if you have a decent amount of stuff in the bed and we all know stuff slides to the front of the bed, if there is stuff that is a decent height under the paragon you can’t push the panels down and open the tonneau. Sorry if that is a big run on sentence.

[@jedinaiit2345]

@@GReviewz yeah that is a legit draw back. Could always keep a hooked stick to retrieve stuff with. My father in law does that to get stuff out of the back of his truck. He keeps a hoe back there.

[@simd510]

@@GReviewz you can put a roll bar there to prevent stuff from getting to that spot

[@simd510]

What truck are you putting it on? Im thinking peragon because my bed is already small

[@jedinaiit2345]

@@simd510 a tundra with the 6.7 bed. I’ve heard some bad things about the paragon, namely you can’t keep things by the cab because then you can’t push the cover down and opened it.

[@ItchingJ]

Can you unlock the retrax from inside the bed without the key? I'd rather open it that way as opposed to carrying another key.

[@GReviewz]

Thanks for watching. To my knowledge the lock on the retrax is keyed and unable to have power locks that sync up with the vehicles key fob…great idea though!

[@cristelagonzalez5616]

Question what is the differences between the RetraxPro XR, RetraxPro XR and the RetraxOne MX?

[@GReviewz]

Thanks for watching. They essentially are the same product except the material. The retrax pro is aluminum and the retrax one is composite… the place I went to purchase has floor models to look at and the retrax one I didnt feel will hold up over the long run..

[@markward244]

What’s your experience with utilizing ratchet straps to secure items in the back of your truck. Any issues ?

[@GReviewz]

Thanks for watching. I have a set of ratchet straps in my bed all the time. No part of this cover gets in the way of using the ratchet locations..

[@derrickm45]

Did you compare with the Truck Covers USA American Roll Tonneau Cover? I believe it has a smaller canister? 8” square

[@GReviewz]

Thanks for watching. I looked at that one as well. The canister is smaller but I look at it like this...the canister is the size of all the material that has to roll up in it. The retrax pro uses very strong aluminum planking.

[@vr6mole]

Would you mind measuring the inside t-slot from one side of the other in a few locations? Measuring 65.5 inches on my 3500 but retrax is saying it needs to be at least 66 inches wide for smooth operation. Mine is very difficult to open/close. Not really possible to widen the side rails at all.

[@GReviewz]

I’m about to hit the hay. I will measure as soon as I can. Did you watch the install video I made as well? To cross check to see if you did anything different..?! kzbin.info/www/bejne/q4fRYmVmlqh9fcU

[@CarlYota]

As you mentioned the cons are stopping me from getting this option. I don't want to lose that much bed space. And I can't justify 2 grand on a bed cover whose main purpose for me is to keep the snow out in the winter. That being said the retraxpro is the best on the market. If I didn't care about price and it somehow magically rolled up into a

[@GReviewz]

Thanks for watching. I’m glad I was able to help you make an educated decision. Yes that is still a downfall for me it does take up space.. as far as durability goes the cover is hard to beat. It still is about 95% water tight, little drips get in heat and there. As far as storage goes it is expandable with a rack being installed on top.. also price is steep however if you buy a cheaper one and it fails in a year or so you will end up buying the better one anyway!

[@andrewp5564]

@greviews, I’ll looking at this for my 2021 F150 short bed (~5.5 ft). Given the space it takes up would you recommend RollnLock or still this? RollnLock takes up 7 inches of length and of course it’s less deep as well. I’m not a laborer or typically hailing much though. Second question- on security, this one looks good as it appears to be able to take more top down weight vs a RollnLock (and we’ll keep Diamondback, Renegade out of this). Not sure whether that actually matters but seems to indicate it could be tougher to pry on the edges? Have you seen anything about the actual toughness of the lock itself? Couldn’t that just be punched through on any of these? Last question- do you know if w/ the RollnLock you can install a rack of some sort? Sounded like you indicated no. Have the install planned Fri for the Retrax but just ensuring it’s actually the correct decision- for me. Also recognizing that in comparison, Retrax on this specific product SKU offers a lifetime warranty vs the respective all aluminum RollnLock which is 3 yrs according to their site. Price difference is a wash long term. Btw- excellent review in my opinion. Comprehensive.

[@GReviewz]

Hey Andrew.thanks for watching. You have a very in dept question and I will do my best to answer it. First to answer the space question that is my only gripe about this unit. It does take up a decent amount of room. Granted you can still store item under the canister on both units. The different between the two is small as far as the canister size. This is one reason I purchased a 3/4 ton truck to get the longer standard bed. As you saw in the video I was able to stand on the unit. It is very secure however there isn’t a tonneau on the market that is theft proof. This unit is however very strong and I feel like they would have to pry for some time to get into this tonneau. Another reason I got this unit was for the side rails I plan on putting a rack on mine in the future whereas the roll lock I don’t believe has that option. Yeah I love the lifetime warranty and thank you for you positive feedback!!

[@andrewp5564]

@@GReviewz thx!

[@GReviewz]

I problem. Let me know how you like it!!

[@victorcamacho7508]

If I put a rack on this cover how many pounds of load I can carry and what type of rack Can I load more than 500 pounds? Thank you

[@GReviewz]

Thanks for watching. I believe the rating on it is 500 lbs in motion.. you can probably load more if you are just driving around but I wouldn’t of you are taking it on a Moab trail or something..I’m thinking about this rack…yakima.com/products/overhaul-hd-tonneau-set-towers-only?_ga=2.62227500.1080464234.1629211707-389436670.1629211707

[@markmcmonagle6794]

If you drop something on it will it dent? If so will that affect the cover from opening?

[@GReviewz]

Thanks for watching. I have not had any problems with my unit as of now. However I have not dropped anything on it either. The pro is very strong. Every aluminum plant that makes up the tonneau has a roller bearing at each end. I guess if you dropped a concrete block in the middle it may cause some problems. But I will say if you saw the part that I stood on the tonneau and nothing happened from that..

[@johndevos9003]

One question is the 13" from the front side of the bed bulkhead or from inside the bed bulkhead? It looked like you measured from the front side of the bed bulkhead. Very good video!

[@GReviewz]

Thanks for watching. I’m not 100% sure the terminology but I put the metal claw on the end of the tape measure on the front edge of the bed..I hope that helps. What other tonneau covers are you cross shopping?

[@johndevos9003]

@@GReviewz I have looked at a lot of different ones but this is my choice. The only problem is we pull a fifth-wheel RV and I use a Reese goose box hitch so I need a clear view from the cargo camera to see the goose ball in the bed of the truck.

[@GReviewz]

@@johndevos9003 this tonneau when in the open position does not block the cargo camera at all.

[@christianfamilyoutdoors4129]

What did you dislike about the revolver x4?

[@GReviewz]

Thanks for watching. The unit itself looks great. I’m part of many truck groups on facebook and it seemed as though the cover wasn’t holding up. There is a black cloth on the bottom of the roll up part that protects it from getting scratched when rolled up and just about everyone was complaining about it falling off.. plus I wanted something that had the rails for adding racks etc in the future..what tonneau covers are you looking at other than x4?

[@christianfamilyoutdoors4129]

@@GReviewz To be honest, the x4 and the retrax are the only ones I like. I realized after thinking about it, the lack of space in the truck doesn't matter to me because I don't haul that much large stuff anyway. I didn't like the paragon because I don't like the way it folds up and I worry that after a while it will break with constant opening and closing. But, I am like you and I like the low profile. The roll and lock seemed nice, but to me not as durable as the retrax. I think after watching this video, I am going to go with the xr. I appreciate the help! Good job on the review!

[@dsy3163]

Excellent video Greviewz! I've just had a RetraxOne XR installed on my 2021 F-150... When I open the cover it doesn't have the smoothness of your glide, I definitely can't push it with two fingers all the way, also when pushed open, it bounces back once it gets to the end, I noticed your seems to lock in place... Do you think Ford has installed my incorrectly?

[@GReviewz]

Thanks for watching! I love my retrax. Before I purchased mine I asked the dealer which they recommended the plastic model or the pro aluminum. They told me the pro aluminum because a lot of people bring the plastic model back for various reasons. And the aluminum seems to be stronger and doesn’t have any problems… having said that I feel like they installed it incorrectly… it should roll smoothly. I have a feeling the two side rails are not perfectly parallel causing some bonding issues… here is a link to my install video of mine…kzbin.info/www/bejne/q4fRYmVmlqh9fcU

[@dynasty4851]

Ohmygosh!!!!! That go hard dawggggg!!!!! I need that. Oh wait, I need a truck first lol. I'm still getting this once I get my truck.

[@GReviewz]

Thanks for watching. I appreciate the comment! It’s a great cover. Let us know if you need help picking out a truck...

[@pinktacotuesday4573]

How did this beat out the peragon?

[@GReviewz]

I looked at the paragon. A friend I know has one and they are nice.. problem w that cover is the only way it can open is you push the first two panels closest to the cab down and the rest accordion into the bed. So you really can’t load your bed full or have stuff under that area or the paragon won’t open.. and as you know stuff tends to slide forward and stop all the way to the front of the bed..right in the way of the paragon opening..like I said the paragon is a great cover.. I like my retrax.

[@pinktacotuesday4573]

@@GReviewz I like the retrax more as well just wanted to get your opinion. The one thing I really like is how easy you can just remove the peragon completely. Also how sturdy is the Retrax when it's retracted in the open position? Could I put my dirt bike tires against it like I would against the front of the bed and tie them down?

[@sunnyvalejedi]

I've got a Rebel, and no drain holes in the front. Can I run the tubes in the side? I'll be getting the Yakima Outpost HD down the road.

[@GReviewz]

Thanks for watching. I’m looking at a 20 rebel bed right now and it has almost the exact same holes I used in my videos to route the drain tubes. But yes you can route the tubes anywhere you want them to go. Just make sure you don’t have the tubes kinked or water will back up into the canister. I am considering the outpost but am leaning toward the overhaul just because if I want to put long items say 2x4x16’ piece of wood or a 12’ kayak I want to be able to adjust the rack so I can put those items over the cab.

[@mikengo8725]

Did you research the roll-n-lock? How did it compare to this cover?

[@GReviewz]

Thanks for watching. My dad had a roll and lock. They are great covers. I cross shopped the roll and lock to the retrax. The retrax canister sits flush to the bed were as the roll and lock sticks up..the roll and lock doesn’t have a model with the side rail and no we’re near the aftermarket support for accessory’s as the retrax. Are you leaning towards the roll and lock more?

[@brandongegg657]

Whats the width of the opening with the side rails installed?

[@GReviewz]

Thanks for watching. Sorry it took me a little bit to get a tape measure to it. The distance between the two side rail of the tonneau co er are 58 3/4”. I hope that helps..you only lose 2 1/4” from each side of your bed with the xr model..

[@brandongegg657]

Thanks for the quick answer. One more question if you don’t mind. What is the clearance dimension from the bed level to the bottom side of the cover as it travels. I am looking at a tool box to fit under it and want the cover to clear it.

[@jamieshawndehner6760]

What do estimate the weight of this cover to be? Thanks for the video!

[@GReviewz]

Thanks for watching. Maybe 75-80 lbs. it’s just large to carry for one person. Obviously retrax makes many different units and the weights range.

[@familyelements4805]

I had one on my previous truck and it leaked. Only the outside areas towards the end of the bed. Is yours still completely dry? I heard the polycarbonate may be more waterproof. I just got a new truck and I need to make a decision.

[@GReviewz]

Thank you for watching. I will say it is about 98% water tight. Nothing is completely waterproof that has seams. In a hard downpour or sitting in rain for days I may get a little water in the very rear corners just because there is a gap between the bed side and the tailgate. That is the trucks fault not the bed cover. The only thing I’d say is completely water tight is one of those clam shell covers or a topper. What kind of truck did you get?

[@familyelements4805]

@@GReviewz I got a '21 F350. I went with the polycarbonate, although I like the look and security of the metal. I'll be watching your video a few more times before installing! lol

[@GReviewz]

@@familyelements4805 hey sir have at it. my video is here to help people install it themselves instead of paying $150 plus. if you need anything let me know. I tried to make it as detailed as possible.

[@WitterPC]

Good video, I just ordered this today

[@GReviewz]

Thanks for watching. I hope you enjoy!! What truck do you have?

[@WitterPC]

@@GReviewz My wife and I just got a 2022 Ram 2500 Laramie Crew Cab 6.4 bed with the Hemi. 20” wheels 285/60/20. We love it.

[@Chellebeller]

Can you open it when tailgate is down and it’s locked. So essentially open it without having to use key to unlock?

[@GReviewz]

The only time the retrax is truly locked is when you use the key to lock the deadbolt. If you don’t lock the deadbolt the retrax will stay shut. And you can open and roll it as you like.. I do t know if that help..?

[@shaundaniels5515]

3:00 min in before he gets to the pont.

[@GReviewz]

Thanks for watching. Are you looking at the retrax for your truck?

[@kristis3159]

Hi! I too have been shopping and researching, and once I think get it nailed down, I change my mind based on some new information. I am considering the three you mentioned and will be getting two total as I have a 2018 F250 which I use for my hobby farm, and a 2020 Ford Raptor for just plain fun!

[@GReviewz]

Thanks for watching. I always tell guys that have a short bed to go with something that doesn’t use bed space. Something that is meant for work or to put larger items in the back to get something more durable. My truck has a purpose in mind so I wanted something that has future features built in.. which one are you really leaning towards?

[@ifp4life]

I’ve live with the Peragon for 4 years now. The last 3 years have been hell. So finicky. There’s nothing like having to rebuild it every couple weeks.

[@GReviewz]

I am sorry for your paragon issues. I looked at paragon and had seen a few reviews that were negative and said close to what you are saying..I have not had one single issue with mine.. the only thing I have done is add some grease to the roller bearings and that was not a necessity I just like it to roll smooth and quiet..you may be able to sell yours and get the retrax?

[@ifp4life]

@@GReviewz im giving my 18 f150 to my dad, so he can deal with it. Just picked up a new Lightning and have a Pace Edwards Ultra groove metal arriving tomorrow. I have a Pace Edwards full metal Jack rabbit on an older gmc I have, It’s 17 years old and works flawlessly, so that’s what swayed my decision this time.

[@paulheo]

NICE VID. I'm also looking at tonneau covers right now specifically that are compatible for bed racks (camping and all that). My search so far seem to lead to not many covers are compatible with bed racks, or at least if they are they don't seem too sturdy. Was that something you also encountered when you were looking at the other covers? I've been looking at those too. But sick cover for sure.

[@GReviewz]

Thank you for watching. Ive looked all over the place to find a tonneau cover that I was able to attach a bed rack. This is the best bet in my opinion. I believe lopro makes one also. Here is a video to the rack I want...kzbin.info/www/bejne/mYfKd2ehe86Ya5o

[@uoobwatcher]

Looking into an electric retractable cover...ok...

[@GReviewz]

Thanks for watching. They really are great covers. What specific reason are you wanting the electric model for?

[@ALITTLESILLYXD]

That seams pretty easy to break. I mean the lock mechanism

[@GReviewz]

Thanks for watching. Of all the people I know that have a retrax Ive never heard of someone breaking the lock mechanism. I have seen people brake the little rubber flap over the lock though. But I will say the retrax pro has a lifetime warranty..what kind of truck do you have?

[@ALITTLESILLYXD]

@@GReviewz 2002 Dodge Ram 1500. But I am at the moment considering maybe changing it for ranger just because is way more fuel eficiente than my old truck.

[@GReviewz]

Yeah the ford rangers are nice trucks. I hope your towing/storage needs don’t change anytime soon there beds are tiny and they can’t tow a whole lot. But they def are fuel efficient. Have you looked at the big 3, 1/2 ton diesel trucks. They get better mpg than ranger and are bigger size!

[@ALITTLESILLYXD]

@@GReviewz yes of course I have but the diesel exceed my needs. refueling a diesel for me is a bit inconvenient because there are no diesel gas stations nearby my home. I agree the ranger is tiny not but it can suit my needs with out spending to much. car where I live are about 10k more expensive than here msrp

[@GReviewz]

In that case yeah the diesel would be a bad idea. We’re do you live that vehicles are that expensive? If it was me I would go with a Toyota Tacoma for the reliability. Ford ecoboost has had a bad track record over the years...

[@thomasselter2507]

What are your thoughts on the pro xr vs one xr? Thanks!

[@GReviewz]

Thanks for watching. I was really close to getting the one xr.. the price is much better than the pro. When I got down to the dealer in the beginning of the review they had examples of the units set up. The owner was there and showed me the two units. He said go ahead mess with the displays. I tried them out. The one is literally plastic planking. I didn’t feel the plastic would last very long. He also told me they never have any problems out of the pro and have more warranty issues from the one than the pro.. I said the heck with it I’d rather have something I know will last along time than something I’ll ha e to replace down the road. What kind of truck do you have?

[@thomasselter2507]

@@GReviewz thanks for the insight! I have a 2017 short bed f150. I plan on having the truck a good few years. It would be consoling to know that it would fit/transfer to my next truck (whenever that is). Not a deal breaker, but with the pro being 2 grand I would be much more inclined to purchase if it did. Of course you can't tell the future, but do you know if these covers are fairly standard (with appropriate bed size) or if there many different models for each truck? I know that's asking a lot, but you seem very knowledgeable so I figured I'd ask.

[@GReviewz]

If you have the f150 short box you know that your bed starting out is one of the shortest boxes you can get on the market. Keep in mind the canister takes up some space as well. For example my ram has a 6.5ft bed. It shares the bed with the 3500 standard bed and the 1500 long bed.. so I can transfer to a couple different truck if I wanted to. But gm, ford, ram Toyota etc do not have any bed covers that will transfer to each other. Your f150 bed is not shared with any other truck except the f150. So if one day you got an f250 it would not transfer to that truck..I hope that makes sense..

[@thomasselter2507]

@@GReviewz yeah it's definitely short, but not a problem for what I need, especially with the Yakima rack. But yes, that makes sense. Thanks for your help!

[@GReviewz]

No problem. Yeah the rack definitely adds a lot of potential. Are you planning on making a overland setup? But yes I recommend the pro..

[@MastaSquidge]

Damn. Way too much front space lost for a short bed on a crew cab these days.

[@GReviewz]

It does take up some room. You still get all the room under the canister plus it’s pretty dang water right and really secure. On top of that you have accessory rails along the bed side to round racks etc for tons more storage..

[@MastaSquidge]

@@GReviewz I've got a few things that take up the full depth and won't fit under it, so I'm SOL lol

[@GReviewz]

I don’t know if it helps to mention I have a 2500 so the bed is the 6’4” box which is much better than having the short 5’6” box with this canister in it as well.

[@amocat11wilson48]

Does this work with the decked storage system?

[@GReviewz]

I’m not 100% sure.. what is the total height of the decked system? If that height is shorter than the canister depth it’ll work..

[@koalafan1576]

@16:29 you said “how to install” but you didn’t show the install, you did a review. 😂🤦‍♂️

[@GReviewz]

Here is the link to the install video. I thought I put it in the description… kzbin.info/www/bejne/q4fRYmVmlqh9fcU&feature=shareb

[@bbuffington]

How does this one beat out the Peragon unit ?

[@GReviewz]

The paragon unit is a good unit. The problem I find with it and my neighbor will agree (he has one) is that when you have items in your bed naturally they will slide to the front on the bed. Well the paragon unit requires you to push the link in last two folding panels closest to the cab inward. In doing this most of the time something is in the way. Which means then you have to go crawl into the bed under the tonneau to move the item. I hope that makes sense.

[@bbuffington]

@@GReviewz thanks. This is very helpful. Really appreciate your reciew.

[@GReviewz]

Thanks for watching. Their are a lot of great tonneau covers on the market. Just do your research and figure out what best fits your needs because these things arnt getting any cheaper.

[@RedG305]

@@GReviewz great point didn’t think about this while considering the Peragon. Do you know if the Peragon also allows rack mounts?

[@RealCptHammonds]

Great cover, but you should look into a used v8 Toyota when your Dodge blows up.

[@GReviewz]

Lol the 6.4 hemi is a great engine..but yes a Toyota v8 is more reliable… but let’s face it the new tt v6 in the tundras have already had more failures than both our engines…

[@michaelvogel5300]

Excellent review

[@GReviewz]

Thank you for watching and the positive feedback. What other tonneau cover are you looking at?

[@jonathanstanley1919]

Thanks for the review.

[@GReviewz]

Thank you for watching. Are you thinking about getting this cover? What other tonneau covers are you cross shopping?

[@RobertMartinezist]

Okay

[@GReviewz]

Thanks for watching.. hope you enjoyed…okay?!

[@RobertMartinezist]

@@GReviewz Okay🤣

[@GReviewz]

I try to be like mr makey from South Park

[@rcdixon76]

I had an older retrax always hated the amount of room it took up in the front of my f250. On the fence..

[@GReviewz]

Thanks for watching. Yes that is the only drawback to the retrax. It does take up space but a lot less than a tool box, and a ton of guys have those.. really for ultimate dry storage go with a topper…

[@shawnnewsome4778]

That would look great on a 3500 mega cab. Dually

[@GReviewz]

It would certainly look good on that also!!

[@supporterofsanity]

Good job. Valuable information. Lets me know this style isn't for me.

[@GReviewz]

Thanks for watching. What about the cover do you not like?

[@supporterofsanity]

@@GReviewz Hauling lumber and bulk materials I would not be willing to give up 13 inches of bed space and I feel like I would break off the drain hoses if I even tried. The old one I am looking to replace is a quad fold and if I want to take it off while I’m out, it is thin enough, about 5” when folded to place longitudinally in the bed. Although no one who has reviewed the retractable covers mentions removing it I can imagine it’s somewhat inconvenient. This cover definitely has a lot of advantages Though.

[@GReviewz]

Yes there isn’t a perfect tonneau there just isn’t for everyone’s needs... I steered away from the folding types because for there cost around 1k plus a lot of guys were saying they fall apart or leak within a couple years... yes they are easy to take off but if they don’t last and leak for me not worth it. My tonneau can be taken off but it’s something that has to be done with two people... undo 4 bed clamps and remove 2 drain tubes and take it off...

[@myront.miller6868]

Ah, I see you got one. Yes indeed they are nice.

[@GReviewz]

Yes sir I saw that you have one also. I had my eye on this unit before I even got my truck. They really are great units.

[@1MoreFish]

Fantastic review.

[@GReviewz]

Thank you! I hope you enjoy the retrax of you get one!!

[@7Amps]

Why does he say okay a lot??

[@GReviewz]

Because I like the word! Hope you enjoyed the review..

[@robertnicolodi2595]

Drugs are bad UmmKay. That's why you shouldn't use drugs UmmKay.

[@GReviewz]

Thanks for watching. Ahh a South Park fan I see..

[@bobbyrowe3344]

My entire bed gets soaked with this cover. Rails will start to rust too

[@GReviewz]

Thanks for watching. Ive had this cover on since the video was made and very little if any water gets in. I haven’t seen any rust as of now but I did put a ceramic coating on mine a few months ago..

[@ChristopherCarden]

you got a ceramic coating on the aluminum cover? do you have an updated video of that?@@GReviewz

[@jdnrotterdam2150]

Man this truck wouldn’t fit in any parking spot in Holland.

[@GReviewz]

Well dang looks like I’m not going to Holland...jk. What are like the biggest vehicles over there...

[@jdnrotterdam2150]

Bmw x5.. audi q7.. mercedes ML.. land rover.. but Those are also not allot and everywhere. Mostly you see hatchbacks or little wagons like the vw golf or Toyota Corolla hyundai kia...and middle classes like bmw 3 serie audi a4 mercedes c class tesla model 3.. allot of electric like kia e-niro or hyundai kona nissan leaf . Or hybrids like prius or Corolla even not the camry because they are not into large sedans. And allot of crossovers like the vw tiguan size

[@GReviewz]

Thats unfortunate. None of those vehicles are really that popular over here.. Tesla is getting more popular over here but mainly in big cities because charging stations are more plentiful. What do people use to tow things that are heavy?

[@jdnrotterdam2150]

Diesel van’s like Volkswagen transporter work van. Or a mercedes sprinter. Or a mercedes vito. All turbo diesel work vans.

[@jdnrotterdam2150]

Here have charging points in almost every street. And fast chargers everywhere next to the highways. The only thing that’s mot great is that allot of houses in the west of holland don’t have their own driveway or own parking spot or garage. Because there is just no space. Almost every house is attached with small front yards and a parking place at the end of the street. And there you can find a charging point for 2 cars. Costs is €5,50 per 100 km in town or city. And €9,75 per 100 on highway for electric. So you can’t use your own power of your house.. but a tesla or any electric vehicle is unaffordable for most of the average people anyway..

[@dsinsocal]

Ok

[@GReviewz]

Thanks David…yes I do say okay a lot. Can’t help it! What kind of truck do you have?

[@dsinsocal]

Hahah. '15 F150. I do love the Retrax. Thinking of getting one.

[@TwoEye2079]

Okay okay okay

[@GReviewz]

Thanks for watching! Okay!! Lol. Do you have a ram?

[@TwoEye2079]

@@GReviewz I have a 2013 and waiting on 2022 2500 that will be delivered mid November. Thank for the video you sold me on this cover.

[@GReviewz]

Awesome. Did you have a Cummins or 5.7 hemi? Any problems? Yeah I love my cover just can’t decide on the rack system I want to get?

[@TwoEye2079]

@@GReviewz I have the 5.7 hemi never had a problem. 96k on it. The new truck is Laramie diesel in granite night addition.

[@GReviewz]

Nice that’s a gorgeous truck!! When ram puts a new transmission behind the Cummins I’m in!! The 68rfe is a train wreck..

[@MrGaiden100]

okay

[@GReviewz]

Thanks for watching. Do you have any actual questions about the truck or tonneau cover? Okay?

[@Familyof4WD]

Mr. Mackey says “mmkay” less

[@GReviewz]

Lol mr Mackey is my uncle. Thanks for watching…mmkay…

[@H20Spy]

"Ok"

[@GReviewz]

All jokes aside..what other tonneau covers are you cross shopping? Ok? Lol

[@michaela5338]

Ok great info ok thanks ok ok ok

[@GReviewz]

Thanks for watching. I hope you enjoyed? Ok ok ok?

[@daviddowling9830]

Okay,yep,okay,okay,ya got it,okay,okay.

[@GReviewz]

lol thanks for watching. I hope you enjoyed my review regardless. What kind of truck do you have?

[@Shane-mr4fe]

Lost me at "my 2020 power wagon 'project' truck".

[@GReviewz]

Thanks for watching. How did I lose you? Some people’s project are slower than others…

[@supervong1]

Cant even see anything

[@GReviewz]

What? I mean the video is recorded in hd…

[@supervong1]

@@GReviewz ok I see it. Very good review. If the the retrax cover is locked over the tailgate, and you forgot your key or lost it, can you open the tailgate and then open/unlock the retrax tonneau from under, without using the key?

[@dontblameme6328]

Came here to get an opinion on a bed cover... Got a commercial instead! 👎👎 Additionally.... Security is a farce. The lock can be popped in 3 seconds with a screwdriver

[@GReviewz]

Thanks for watching. I purchased this tonneau cover with my own money, my friend works for Leonard’s and I was trying to support local business..my review was honest and I even mentioned the other covers I was looking at. I don’t feel like I left a single aspect or concern from my video that a person in the market is considering. Locks are there to keep honest people honest…out of all the covers on the market this one is more secure than most and surely beats out a soft tonneau..

[@twb2077]

Constructive criticism… stop saying “Ok”. Please.

[@GReviewz]

Thanks for watching. I appreciate it. Our channel has been making videos since 16’ and I’ve tried but it’s just something I say. What kind of truck do you have?

[@twb2077]

@@GReviewz 2020 RAM 1500. Just ordered the RetraxPro XR and Rhino-Rack crossbars.

[@GReviewz]

That’s a great setup..what ru planning on putting on the crossbars? Rack, bikes?

[@twb2077]

@@GReviewz Our Yakima car top carrier and/or other bigger items. Going to be living on the road for a year or so, so looking to maximize our storage.

[@wam1388]

Take a speech class! Ok, okay, alright. These should not be used every other f*ing word. Ok? They are not a replacement for punctuation. Just as bad as when others say um all the time. To increase the quality of your videos, please find a way to eliminate that.

[@GReviewz]

Dang… clearly you’ve never made a video. About 40-50 clips went into this video. If I said ok one time in each clip that is why it sounds like I say it a lot. I’m a trainer by profession so I’m constantly asking people if they get what I’m telling them by saying (ok)!? A video is about content not about the English language!!!

[@ZenEndurance]

OK

[@GReviewz]

Thanks for watching. It’s spelled okay… do you have any real question/comments about the truck or tonneau cover?

[@michaelbateman7138]

Ok

[@GReviewz]

Okay! I’m glad we had this talk..