Neo Geo AES 3-6 True Jailbar Fix (No Bypass, Keep Composite)

See the everyday life of working a retro modding company. Learn hardware design, mods, software, FPGA, LCDs and more.
Discord / discord
Store www.retrosix.c...
Wiki www.retrosix.wiki
Instagram / retrosixuk
Facebook / retrosixuk
Twitch / retrosixuk

[@emmettturner9452]

In my own video on this I completely removed those three traces by peeling them right off the board with tweezers. Used the same game to test/demo the jailbars too. ;)

[@pyract]

Thanks so much for this fix! I can confirm it also works on a JP NTSC console, as that test point section is also completely unpopulated.

[@RVNR2022]

Amazing. it would be great if you could do this in depth research for famicom too. all composite mods for Famicom have vertical lines as does this neo geo. and I think many people would find your video very useful, especially me

[@RetroSix]

Sure thing. Any particular revision of Famicom? Do the NES suffer the same?

[@RVNR2022]

@@RetroSix NES doesn't suffer the same. it already have composite integrated in the console and is perfect. famicom have only rf output and need a mod for composite signal out but when i do it, no matter what i do, any revision have jailbars. it can be improved if i put a big filtering cap in the 5 volt line of the console such as 400uf -ish but noting major. and i really want to know where is the problem.

[@RetroSix]

@@RVNR2022 ok cool. I'll have to mod my Famicom when I get time and find the cause

[@RVNR2022]

@@RetroSix fantastic. your work is amazing when is time to do deep research. you surely have much knowledge than me.

[@RetroSix]

Find the real cause here www.retrosix.wiki/jailbar-fix-neo-geo-aes

[@iorix98]

Does this mod work with the NTSC consoles or the PAL model only? Ive a japanese 3-6 revision and i wanna keep the composite (even though i only use the RGB). Thanks

[@RetroSix]

You would have to show me the top left area where that circuit is in the video I say is blank. If it's populated we would have to rewire new wires to that area. Jump on discord.gg/RetroSix and share images

[@lukasblenk3684]

Whats that stuff on the removed traces? If its not a sealent i would highly recommand that. Else the corosion will happen pretty shure the next 15 years.

[@RetroSix]

The exposed ends are no different than every exposed via, solder pad or edge connector. It will be fine