How to replace a 2015-2021 Chrysler 300C fender | ReveMoto

[@stevethird2631]

Do you have to take the bumper off

[@ReveMoto]

You can take just the sides of the bumper off and push it back

[@acostaj326]

Do you have to remove front bumper?

[@ReveMoto]

Hello and you do not have to completely remove the front bumper. We were replacing his front bumper, so it was easy for us. You do have to take off the corner of the bumper to access the bolts under the fender nose and behind the bumper corner. You can just let the bumper hang on the corner there. Good luck!

[@mkeefe4248]

Hey I’m 16 and I bought a 2007 Chrysler 300c hemi. I’m working on it myself and would this work on my year?

[@ReveMoto]

Yeah it’s going to be very similar. They didn’t change too much on these cars when they did a face lift. If you need parts go to www.ReveMoto.com

[@serpar3008]

What happen if you broke the fender bracket ?

[@ReveMoto]

Hello and great question. If the fender bracket or bumper retainer is broken, the bumper won't secure to the fender. Assuming the the rest of the bumper is properly secured, the bumper would just pop out on that side, It will be loose and, or have uneven spacing. Fender brackets range from $30+, so it's recommend to just replace it. Visit us at www.revemoto.com and chat with our staff for assistance!

[@serpar3008]

@@ReveMoto hello no I mean the fender bracket the on by the door jam

[@estovianharris1506]

Does this work for a 2014

[@ReveMoto]

Yes! This how-to should work for the 2011-2022 Chrysler 300 as they use the same fender

[@fkhowyoufeelaboutit]

2:28 what is that black horn looking part called?

[@ReveMoto]

That’s the intake pipe. It lets air in to cool the engine. Let me know if you have any other question. Gotta throw it out there if you need any parts for your car go to www.ReveMoto.com

[@derekeldridge4407]

is this the same process for a 2013 chrysler 300?

[@ReveMoto]

It is very similar, but I did video for the Chrysler 300 you have. kzbin.info/www/bejne/g2m0nZ6tbL5oa7s. This one is an older video so if you have any questions let me know. If you need this bumper already painted to match your car. Go to www.ReveMoto.com

[@derekeldridge4407]

@@ReveMoto i see that video is for a bumper. i have actually done that myself a few times not too bad but was def curious if its the same for the fender. I have driver side fender damage, door damage, and rocker panel damage and am curious on how to replace all 3 of those.

[@ReveMoto]

@@derekeldridge4407 I wish we still had this car. The door is pretty simple, it held on by a big bolts. Unplug the main harness behind the door panel and remove the bolts. The hard part is transferring the guts to the new door 😅. The rocker panel is held on by clips, but first remove the bolts on each and and the middle. Good luck!

[@jasonwilliamssr.9094]

Great video! Can you please tell me what’s the name of that bracket hanging on side of the headlight? I can’t find that part anywhere mine is missing from a wreck that’s the only part I need now.

[@stephenjuarez7712]

Bumper cover bracket , its on amazon for like 5$ i just bought mine

[@stephenjuarez7712]

Youll also probably need these

[@ReveMoto]

Exactly what @stephenjuarez7712 said

[@fkhowyoufeelaboutit]

4:22 👍🏿

[@ReveMoto]

Thank you so much for