[REVIEW] 3DRAP Fanatec CSL Pedals Elastomer Brake MOD. Better feel, improved control! 🦶‍

[@SimRacingCorner]

▶ www.3drap.it Storewide 5% Discount coupon code: *srcorner5* (excludes Ignition products) ▶ Unboxing a big stash of 3DRAP CSL Pedal MODS! Lovely STUFF! kzbin.info/www/bejne/gHekiZSCo8uIqJI ▶ Fanatec CSL Pedals Load Cell [REVIEW] kzbin.info/www/bejne/j4POfWVpo9l5pK8 ▶ 3DRAP Zero Noise Pedals MOD for the Fanatec CSL pedals [REVIEW] kzbin.info/www/bejne/epycfGCvf8tsack ▶ Fanatec CSL pedals '3DRAP Throttle/Clutch PRO Kit'. [REVIEW] kzbin.info/www/bejne/epycfGCvf8tsack ▶ Fanatec CSL Pedals [DIY] Damper MOD. Improve the FEEL! [GUIDE] kzbin.info/www/bejne/pJClZoOBi7h-edE

[@DrR1pper]

Done. :) A question if I may please. What is the maximum force input % you're using with your load cell? I'm using around 40-50% of the max input range (via fanatec software) because I'm currently using a foldable cockpit (GT lite) and applying more than 50% of the peak readable input force to the LC tilts the seat back due to its foldable nature. So I was wondering with that in mind, if you were to speculate, which of the combinations you think might be best (if not the same as your general recommendation) with a foldable cockpit as such. Many thanks in advance.

[@SimRacingCorner]

Thanks again for the donation Martin.👍‍ I'm running the brake force at 90%. In your situation then a I think either the progressive/progressive, or progressive/linear setup would be the option to run with. There is another option to soften the pedal using a metal spring along with the a couple of the Fanatec elastomers. Right after finishing this video, I begun testing this spring mod, but there is a way to go before I'm ready to put that video out. I need to try some different spring strengths. But early signs is that it's pretty good (and much cheaper) alternative. There's video on the mod here. kzbin.info/www/bejne/mquUpoaXm5V-ick. The size is 20 x 10 x 25mm, and I bought mine from here: www.aliexpress.com/item/4000277618107.html?spm=a2g0o.order_list.0.0.21ef1802TMiMIY. I currently have the blue one installed, and waiting on the Yellow to arrive.

[@DrR1pper]

@@SimRacingCorner awesome, thank you and I look forward to your video on it. :)

[@DrR1pper]

@@SimRacingCorner I'm really interested in hearing (when ready) your opinion of all elastomer vs spring-elastomer combo.

[@SimRacingCorner]

@@DrR1pper I can say this already, elastomers do give a more realistic brake texture over a spring. For braking control, the elastomers have the advantage. Not much, but feedback from the pedal is a bit better with elastomers.

[@kriit24]

i moved from 3drap to VNM PEDAL BRAKE UPGRADE KIT and this significantly improved my lap times about 0.5 second to 1 second. i used combo with spring and elastomer. And now I combine it with a damper kit, it will take some rebuilding, but I hope it gives a better feeling

[@LawnNOrder]

How can you tell the Linear and progressive ones apart?

[@n3rdstrength]

Holy cow, I like the hybrid soooo much. I immediately shaved .5-1s off my best laps in ACC. What a difference.

[@KillaV91]

Iv been wating for ages for you to do the video on these! Worth the wait! X

[@SimRacingCorner]

Thanks. Yeah, it took a while to get this all set up, it's quite awkward to film all the angles in the cramped space I have to work with.

[@curleex3838]

I used the csl elite elastomers from ebay, only 15 quid delivered and i got 10, 2 of each strength and they are just perfect, ive not tried the 3d rap ones as i cant afford them but the csl elite ones are fantastic and fit perfectly...✌🏻💙

[@SimRacingCorner]

Nice one, good advice.

[@rollback2653]

do you have a link for this?

[@marcod7615]

what colors did you use?

[@curleex3838]

@@rollback2653 : BBJ SimRacing Damper Tuning Kit (PU Foam & Rubber) for Fanatec CSL Elite Pedals..... Out of stock ATM.....

[@curleex3838]

@@marcod7615 2 blue and 2 green works best for me....

[@RipmasterT]

Awesome review! Thanks to you I know what to buy. Very good explanation about the differences between te stiffness. Thanks a lot!

[@anonym8951]

Using progressiv and fanatec hybrid and like it on my csl 👍👍

[@nicholase6552]

I will do that when I receive mine.

[@The.Fast.Farmer]

Just ordered the linear and progressive for my dc3 pedals. Great review pal 👍

[@Zascar_88]

Great video and analysis of the mods. I like how you went through all the different options too! Well done! I purchased these too both sets and the accel and clutch too. I love the mods they are worth the money. My only complaint is on the rings that can split easily but the bushings are great. I went through a similar process testing the different setups and landed on full progressive but may try the one progression and stock to see how it feels.... thanks for the insight and comparisons 👍

[@SimRacingCorner]

Thanks man. I definately felt it was worthwhile describing the different setups as they all change the feel quite a bit.

[@ReptileMonitor]

What made you faster or more consistent, the 3DRAP or the springs? I already ordered the yellow/blue springs as they are really cheap, but I need to make sure the 3DRAP would at least make me more consistent before spending $50 on a mod. Last thing, do the 3DRAP elastomers become weaker over time?

[@ghastous]

got my load cell pedal the other day and man that pedal is stiff and after watching a few mod vids on 3d wrap i bought the hybrid as i think it will suit me best. But least watching this i have options aswell with using fanatec and the 3dwraps

[@yomommanigga2501]

My question is which one would you go with if the pedals are on carpet? I'm trying to decide which setup to go with this one or with the spring.

[@SimRacingCorner]

Quite honestly, I wouldn't pick these pedals at all if they aren't hard mounted. The Thrustmaster T-LCM or Moza SRP pedals are far better on a carpet due to the lighter tension on the brake.

[@yomommanigga2501]

@@SimRacingCorner lol well I already crossed that bridge, I already have the CSL load cell pedals but from what you said about the progressives that might be the way to go

[@RajveerSingh-rq1hd]

Does anybody know how to fix a fluctuating load cell brake??? I just opened these and this issue was already there 😭😭😭 it gets worse as I turn down the pressure sensitivity, if anyone knows how to fix it please help.

[@SimRacingCorner]

Contact Fanatec support, that's not normal. It sounds like it's faulty.

[@coryeyre]

Hi, I was wondering if you still have these, Would you be able to tell me the dimensions of a single elastomer? inner diamater (the hole) and outer diamater and the height? Thank you

[@SimRacingCorner]

Sure, here.... ID:8mm OD:30mm H:24mm

[@coryeyre]

@@SimRacingCorner Thank you!

[@andymcguigan7238]

Anyone know if the moza srp one is any good ?

[@Repa24]

How do the CSL LC + 3DRAP and the TLCM + 3DRAP compare to each other? Are the brakes equivalent to each other then or is the braking distance still smaller with the CSL than with the Thrustmaster?

[@SimRacingCorner]

I haven't used the 3DRAP mod on the TLCM pedals. However, I can say the end result won't be identical, as the size of the elastomer mods are not the same size for both pedal sets, so their compression/stiffness are different.

[@Repa24]

@@SimRacingCorner Okay thank you. So which Pedal-Set would you recommend? The TLCM + Brake Mod or the CSL + Brake Mod? I know the Brake Mods you can do are quite different from each other, but I'm trying to get a "normal" Brake-Pedal feeling after all.

[@SimRacingCorner]

@@Repa24 Are the pedals going to be hard mounted, or just loose on the floor?

[@Repa24]

@@SimRacingCorner I am planning to build an office-chair rig, so (hopefully) mounted.

[@SimRacingCorner]

@@Repa24 I expect the TLCM pedals are likely to be more suitable for you. I think the CSL pedal brake maybe too stiff for your application.

[@tunsiehelden]

Do these work with the pedals in the GT DD pro set? The load cell one

[@SimRacingCorner]

Yes; assuming you get the load cell brake pedal with it.

[@BishopRealTalk98]

Where can I find a peddle mount like the one you're using? Thx

[@SimRacingCorner]

It's this kzbin.info/www/bejne/fmSXf6F9eMqjnrM

[@eazyasyoulike]

With Linear/Progressive combination would it make any difference which way round?

[@SimRacingCorner]

It shouldn't do.

[@energylevels1]

@@SimRacingCorner 👍👍👍

[@TomTheSurgen1]

What’s the throttle and clutch mod seen here please?

[@SimRacingCorner]

▶ Fanatec CSL pedals '3DRAP Throttle/Clutch PRO Kit'. [REVIEW] kzbin.info/www/bejne/epycfGCvf8tsack

[@ghastous]

Got mine today as i went with the hybrid and nope didnt make a single bit of difference the pedal is still rock solid like you are pushing on a wall so im just going to send them back.. Complete waste of money cos no way this is how a real brake pedal feels lolz

[@BishopRealTalk98]

Did you wear shoes? I find the Hybrid set up with shoes is perfect for me. Most load cells stiff.

[@ghastous]

@@BishopRealTalk98 I sold my pedal set and now have the Clubsport v3s which are 10000x better

[@BishopRealTalk98]

@@ghastous Nice. Might upgrade to those one day.

[@StickyGeko]

Weird fish water shoes?

[@SimRacingCorner]

A lot of us use them. kzbin.info/www/bejne/pYjbomWhiM52r5Y

[@TheVintea]

Oh no.... It's really work!!!!