Review: ASG Infinity CNC Motors

My new personal favorite for aftermarket motors. They offer cnc'ed components, strong neodymium magnets, solid QC, and a variety of different TPA's for every application.

[@Minerva_Devi]

Welcome back, Ryan. I have to admit, after talking to ASG Bob about the 28TPA motors for a good few hours on Reddit, I was hyped up for their release. I'm really glad that they live up to my hopes. They resemble Systema motors in a lot of ways, and that's in no way a bad thing. Looking forward to seeing some more videos in the near future :)

[@valleyriverarms]

Devin Dhillon After you change the pinion gear there's really not a whole lot else I really want from these motors.

[@eldementecentrino]

Got a new VFC Scar-L and was looking for a new motor, guess i found it. Cheers for the great review

[@matrigs]

How did the install of the 35k end? What kind of setup was it in and how where the results. I wante to buy a motor for my 16:1 + M130-M140 gearbox but only the 35k is availlable.

[@LegacyAirTech]

Interested to see how the ASG 28tpa motors hold up nice to see you back, btw.

[@hicapasforlifeyeet4391]

I've been using the 28 tpa in my dsg and it's holding up great even with my 6000 mah 80c 3s battery lol

[@justanotherasian4395]

Hi Capas For Life Yeet Christ that’s a big battery

[@andrewbass5267]

Awesome your back, this made my day.

[@hunter1129]

i use the CNC U-30000 (Green) and CNC U-35000 (Blue) The Blue have i used for a couple months... 1st thing to die. The Top/Tower bearing... but got it replaced by the dealer under warrenty. Pinion is also almost worn out (the black type) witch i am gonna get replaced soon. The green is the one ive used the least (use it in my M150 DMR) runs preety good. only problem was that i had to dremel alot og material from the pistolgrip to get it to sit properly.. but not the last time i use that motor. (and the blue ofc) But from my personal experience.. i am stil a bigger "fan" of the normal (Non CNC) Infinity Motor's.

[@Maekiii]

How's the insulation in the endbell? Just paint/adonizing?

[@valleyriverarms]

Maekiii I gotta take it apart again but yeah the endbell is anodized. The screws holding it in are plastic though and the retention ring they screw into is plastic as well.

[@Maekiii]

valleyriverarms Ouch. So they are mosfet destroyers just like the systema's then. The anodizing will insulate only up to about 20V voltage. Gandolf has talked about it in the past in ASM. You can fix it by putting plastic washers under the contacts/ brush holders.

[@valleyriverarms]

Upon further inspection, the plates of the endbell that hold the brushes and other contacts all rest on another plastic piece that goes under that. And another correction the retention ring but the screws are still plastic. I think that solves the insulation problems correct?

[@actionsportgamesbob]

Maekiii Ryan's analysis is correct! The components that screw into the endbell all sit on a non-conductive board that's a little under 1mm in thickness to prevent direct metal-to-metal contact. The brush screws and the posts are both plastic, while the retention ring is metal.

[@Maekiii]

ActionSportGames Bob Great then!

[@adejarnette3]

Do you know what the TPA is on the Blue High speed Rocket motors???

[@_Egg]

Just ordered my 45000. Can't wait

[@llspacemonkeyll]

Did you have any magazine feeding issues after installing your 45k motor?

[@_Egg]

llspacemonkeyll yeah, a few. but it was worth it

[@llspacemonkeyll]

@@_Egg nice, what kind of mags are you running? I just brought home this motor, about to install and was curious about feeding issues. I've got S Arms 160rnd mid caps.

[@_Egg]

llspacemonkeyll to be honest im not 100% sure. im currently on vacation

[@llspacemonkeyll]

@@_Egg enjoy!

[@Brandon-rn3sk]

hey i have a question, how do you shim your gun like that?

[@DeAtHaToMiC88]

cool, looks like ill get one of the 45000 for my p90 high ROF build, i was going to get a lonex but the a2 i put into my masada although very quiet and stay pretty cool are just too expensive for what i get them at in the uk (£ 45.99), far from me to do any research what so ever but have you price checked any places to give me an idea where i can pick one of these up from without getting ripped off? if not, that's cool.

[@valleyriverarms]

DeAtHaToMiC88 No idea how the pricing works for the UK, sorry dude

[@adrianoawz2676]

+DeAtHaToMiC88 You can be happy that you don't live in Germany. Here a Lonex motor costs 80€

[@nadirbesirovic4968]

I use 12: 1 gears on a 25 k ifrit motor !! Which motor do you recommend for a larger rof??

[@valleyriverarms]

matrix magnum or turbo maybe. power draw might go up though

[@andersjensen7591]

hello were do you buy the infinty motors, cause they are very expensive in denmark were i live. regards Anders

[@bondeb42]

Not exactly "cheap" motors either way

[@justink.506]

I know I’m a little late to the party, but what battery are these motors measured with?

[@valleyriverarms]

It was probably an 11.1 but no idea now tbh

[@remmo_2725]

So what rpm is the better for high trriger response for springs m110 and m120?

[@valleyriverarms]

I'd go middle of the road like 30k or something

[@Clim_c]

I'm running an m130 and currently I have a Lonex A1 supreme. Which ASG would be good for my high fps build? 30k?

[@valleyriverarms]

+C Lm honestly you're probably fine just sticking with the lonex

[@ridiculousiam1496]

Specs on the gun you were testing it on??

[@valleyriverarms]

RidiculousiAm 18:1 with m120 spring. nothing crazy.

[@addiction_lord_]

what if I put the 45000 into stock gun with m120???

[@valleyriverarms]

depends on the battery. But high power draw and if it goes too fast you'll get pre engagement

[@xAUSTIN316x]

i put his in my bolt sr16 cause the stock motor keept locking up. i also upgraded to siegetek gears and the motor still locks up

[@sebastiancamillusnielsen228]

INFERNO SPECTRE you must be the fault and not the motor

[@xAUSTIN316x]

NOPE evike installed everything

[@sebastiancamillusnielsen228]

Have you troede the 28 tpa yet

[@141jpost]

Hey, You should look at the motors on Oppenheimer 's webpage. They are a company based out of ohio

[@valleyriverarms]

Josh Post their 18k motors? Yeah I believe they put in a request to ASG to make 28tpa motors which asg also sells now.

[@oupsydaisy6100]

how many rps for the 45k?

[@valleyriverarms]

yes

[@Kelric78]

I wish i could live in the Usa To Learn from you how to setup my gearbox the right way side by side, but im here in freaking Germany where only semi is allowed no Laser oder flashlights oh man :)

[@valleyriverarms]

Kelric78 best way to learn is trial and error breaking things and reading/watching internet stuff

[@adrianoawz2676]

+Kelric78 What I do is I build a under 0.5 Joule softair with Quick spring change and than ich go to france or austria and just change the spring

[@1haze2011]

💪💪💪💪💪💪💪🔥🔥🔥🔥🔥🔥 Thanks ima get the 40k

[@Cha0s241]

12 tpa + 14.6 lipo.....well looks like my dsg will get a new motor for the lolz.

[@valleyriverarms]

Chaos_241 the 45k is pretty fast

[@cloud-ny5ux]

metal enbell, can't wait for the electrical shorts if they aren't insulated correctly like the system motors

[@czaczaja]

fix that nozzle issue mate