I bought one of these 3 years ago it works on all my tubeless wheels MTB Gravel and Road. New tyres sometimes need valve core removing to inflate first time, but it’s worked every-time.
@GravelCyclist3 жыл бұрын
Nice! it is my go to inflation pump for everything. I have the latest version with the digital gauge and so on, but I still prefer the original.
@NeutralGenericUser3 жыл бұрын
Thank you for this demonstration, and all the pumping required to film it!
@Chader97 жыл бұрын
The issue of back feeding into the air tank is annoying. But you can cheat it a bit if your are inflating more than one tire. When you apply the fitting to that tire the first time, you will fill the tank. Add pressure as desired to the tire. Before releasing the air chuck, close the lever to the air tank. This locks in the current pressure and volume of air. Then you can attach the chuck to the 2nd tire, open the air tank lever and you will have more pressure ready to go. It works nicely this way if you have several tires to set. After that, I release the tank so there is no pressure held over an extended period.
@GravelCyclist7 жыл бұрын
Great tip Chad! Thanks for sharing.
@StephanieHughesDesign11 ай бұрын
Good review, mate. Thanks.
@olegpetelevitch44433 жыл бұрын
I just bought the Joe blow booster ! It was a throw up with a coin ! A few mechanics I know told me the Topeak booster !
@imagines96883 жыл бұрын
VERY USEFUL video thanks. i just need to find a low presser version for my 4.5" wheels
@johnhollister37 жыл бұрын
Which one is better? The Bontrager Flash Charger TLR or the Topeak JoeBlow Booster.
@GravelCyclist7 жыл бұрын
This isn't a comparison video, but you can check my review of the Topeak JoeBlow Booster and decide for yourself. Hope that helps!
@natedempsey33895 жыл бұрын
John Hollister there’s also the TRUFLO AIRSTORE booster pump which btw inflates to 260 psi/18 bar.
@PhilAndersonOutside7 жыл бұрын
Terrific review. Thanks for sharing!
@tmayberry75594 жыл бұрын
I sure like those shoes. And great review
@mikeandrews75512 жыл бұрын
Doesn't matter about letting the air out if the tyre is seated, you can just use a normal pump to reinflate.
@pault4773 жыл бұрын
How much air did you put into the charger?
@GravelCyclist3 жыл бұрын
The secondary cylinder max's out at 160psi, generally I inflate it to 140psi.
@gutersteinker6 жыл бұрын
Cant put it into presta adapter
@justinbarney62866 жыл бұрын
I AM GETTING ONE ASAP! :)
@crabtrap5 жыл бұрын
this pump is garabage if you have to repair it. needless amount of complex ball bearing and springs when a simple ball valve would have done. plastic allen bolts stripp with first removal.