REVIEW: TISAS D10 10mm Vs. Tisas 45ACP. *MY Toughts*

[@BERETTA9mmUSA]

We are starting to Review Tisas 1911 pistols along with the other 25 1911 pistols that we own. Good Stuff. Good to see you have 3 of them. Thanks for doing a video for us to watch. Stay Safe! 🤠👮🏻‍♂️🐉🇺🇸👍👋🍀👻😉🌚 B9USA Sr.

[@patricktx3357]

Great video. I usually have my go to guys when I am looking at a particular firearm but stumbled onto you. The information on the tweaks and quirks of the Tisas was great. Also found the demonstration on the differences between 45 & 10 when shooting helpful. I absolutely love my cheap Tisas and saw the plain 5inch on my local dealers website for $299 this morning. I think it is a great build platform or maybe first time 1911 because you can mess with it and you haven’t lost much if you beat it up a little. I have had many 1911s. The Tisas was the first one I took completely apart because why not. After cleaning and tinkering, I would put it up against a factory kimber or Gold cup any day. My cheap truck gun purchase turned into my favorite 1911. You should do more firearm vids.

[@SpeedyTube83]

Thanks! I try to give honest reviews for the normal guy when I can.

[@LIONTAMER3D]

out of the box 1911's @ sub $500, tisas/sds imports can't be beat

[@Sneedmeister]

I got a Tisas Tanker 1911a1 a few months ago and its been a really amazing firearm. Superb materials and fitment everywhere you look on this gun. I honestly can't believe they managed to make a 100% forged steel 1911 for such an attractive price, not to mention that its eaten hollowpoints and +p rounds like a champ. Springfield and Colt need to get their heads out of their asses and start producing "glock budget" $500 1911's like Tisas. I love Rock Island 1911's too but Tisas blows them out of the water.

[@SpeedyTube83]

Agreed. Even with needing some tinkering, they are a great value.

[@LIONTAMER3D]

@@SpeedyTube83 they don't "need" tinkering, your standards are high =)

[@andog6092]

Springfield makes a 500 dollar 1911. Its called the mil spec and its fantastic

[@SpeedyTube83]

@@andog6092 i owned one before. Mine was made in brazil as well..... As u can see, i am a lefty and unless it has an ambi safety, its useless to me as a shooter. I tired of doing weird tricks to be safe on a cocked and locked. Tisas gives you ambi on most and i applaude that. Nobody remembers leftys.....

[@nonyabiz9487]

I highly recommend the 1911 long slide in 10mm. The extra weight in the front of the barrel helps me get on target much faster than smaller 10 pistols.

[@SpeedyTube83]

If this one ends up running really well i might look into a threaded barrel to put a comp on it. Shes pretty poppy but amazing accuracy. I can easily hit a 4" popper at 25yds about 90% of the time

[@LIONTAMER3D]

6 inch "hunter" 1911's in 10mm are a dream

[@TheREALLibertyOrDeath]

@@LIONTAMER3D I have an iver Johnson and it’s been great

[@winnon992]

I’ve got 3 Tisas . Two 45acp and one 9mm . I have a 10mm RIA 16 round that’s okay. I love my Tisas pistols. Classic was having a sale last month and I got a 4 1/4 stainless for $399. I just bought a 1000 round case of 10mm . My favorite pistol ammo !

[@GreyBeardUSA]

I appreciate your perspective - thanks for making this video with the pros and cons.

[@waynemorgan5733]

Nice review. You're on point. You're right about needing some work. Your review will help anyone to make their gun run great, any 1911.

[@surgeeclipse6323]

Excellent review.......honest and to the point. Tisas makes great 1911's for the money.....

[@phx4closureman]

7:43 *Nah, it's just a "Turkey gun"!! Finally got my D10 yesterday and put 100 rds through it today!!! Ran flawlessly!! I shot most of the 10mm ammo I bought yesterday!! Damn! Gotta go buy more now!*

[@NightwoodGuns]

Just want to echo that my D10 has the same issue digging into the brass. It causes a nasty failure to return to battery. Once I eject the mag it will chamber the round. Happens 1-3 times per mag.

[@SpeedyTube83]

Take a file and stone and round the bottom leading edge of the slide where the chamfer is. Its not made to spec. Rounding the edge will make it go away and barely scuff the brass :).

[@r1sabotage]

I only shot a box out of my D10, but I've had no issues at all. Thanks for the advice should an issue arise

[@avigares]

As a turkish guy i didn’t know they have a 10mm 1911,must be new.

[@LIONTAMER3D]

10mm 1911's are just perfect

[@steven3379]

You may have just convinced me to trade my Sig X-Ten for a Tisas D 10...mind you I like my X-Ten.! I just got my first all metal pistol and now I'm hooked! (92X).!

[@connormarek1028]

I wish they made the D10 with a rail, but I still love it. I might have to get this one....and the others ;)

[@kaig453]

Completely agree. Rails on a 10mm 1911 would set it apart.

[@pliskenx51mm83]

After watching this I'm gonna have to start getting some more 1911s. Great video!

[@rockylindgren5885]

Great review and information sir, I wonder if you would answer a couple of questions for me though? Did you have any issues fitting the slide stops? Also, are those the one-piece Magwell that they sell?

[@Archer_82]

Thank you for the confirmation bias, I was looking for a decent platform to start a few builds from.

[@highsecurityagent8778]

I've got the OD green Tisas 1911A1 GOVERNMENT WW2 GUN 45acp it is very good. You should get the HIPOINT 1095TS 10mm carbine to go along with you Tisas 10mm. Do you CCW These guns.

[@MrWheelGun]

Just ordered my D10 today.

[@franciswilliams2693]

Picked up the D 10 myself a couple days ago. Will be breaking it in very soon!

[@inquisitive980]

Nice job on the tuning

[@dickeymoore3662]

Does the Tisas D10 10mm have a ramped barrel?Thanks

[@destroyingdadxx2274]

Yes it does.

[@kyleritchie50]

I literally just got that 10mm for less than $700 with shipping and all. When I pay for my ffl transfer, I think it's still under $700. It's a beautiful gun though. I also think people over estimate what 10mm does. I have ran the Glock 20 and a few XDMs for a while. It's not that crazy. 10mm isn't that powerful when you consider all handgun calibers. More than 9mm? Sure. But it's controllable and not crazy.

[@SpeedyTube83]

I didn't have the ability to get it at a discount or dealer cost at the time. I got it basically for $810 iirc out the door. It's a $770 pistol online. 10mm is wildly more powerful that a 9mm. More energy than a 357mag at times. I'm not sure if this is a troll post to see what it reply with.

[@r1sabotage]

@@SpeedyTube83 Hi, just bought mine today for $700 without tax at my dealer. It’s currently on layaway so I guess deals can be found out there. I can’t wait to finish paying the thing off

[@steveosgood9182]

what's your opinion of the metallurgy of the Tisas?

[@SpeedyTube83]

Metallurgy looks great. I don't see soft parts anywhere, and I've shot some HOTTTT 950FPS range 230s and 1200fps 180gr 10mm. I bought them because the barrel slide and frame are all forged so I'm starting with a GREAT base to tinker with.

[@martinwood7805]

I recently purchased the Tisas 5" Duty, G10 grips and TEChWELL mag well to go with it. My problem is that there is a gap between the lower part of the grip. Do I need to mill the bottom of the frame out to fit the mag well or is there a mag well that will fit. This is my first 1911.

[@SpeedyTube83]

I used klonimus grips and mag well myself And an aluminum mainspring housing

[@lonewanderer3603]

A gas pedal on that 10mm will help you stay on target during recoil.

[@originalterrorsquad]

You said the 10mm had 1 little angle off what angle was that? And what did you file it to,m

[@SpeedyTube83]

I made another video to address it!

[@phx4closureman]

5:37 , 5:47 , 6:17 *BUT THAT'S WHY I WANT ONE!!!!* 😆😆😆😆😆😆😆

[@dickeymoore3662]

Could you show what you had to do to the 10mm gun?Thanks

[@SpeedyTube83]

The bevel on the bottom of the slide that contacts the brass when it feeds a round in needs to be radiused smooth with a stone. Very simple task.

[@dickeymoore3662]

@@SpeedyTube83 sure wish you could show me

[@Miketheneck]

The Glock 20 has very little recoil same as the Glock 21 45 caliber in my opinion. The 1911 ‘s a think have a little more recoil. Glock absorbs the recoil better.

[@aprendizdecazadoryaventura5302]

Tisas should make 38 super 1911

[@misssassycompany9950]

How did you make the weapon light work? They say it can’t hold a weapon light.

[@SpeedyTube83]

I just used a streamlight and put the lug in the other spot. The commander is railed

[@misssassycompany9950]

@@SpeedyTube83 thanks for the info. So I guess a weapon light actually works on the railed version. Is this Tisas a good base gun? I’m thinking of getting one and sending it to a smith and do a rebuild.

[@Tacticaltaco-kc9be]

What did you do for the tlr1 to fit?

[@SpeedyTube83]

I modded the insert and moved it to the other end by the batt cap area

[@borandagio807]

Wait so I don’t get it, did the gun run or not? All you showed was the brass with a little scratch on it and acted like it was detrimental to the reliability.

[@SpeedyTube83]

It totally stopped the slide and failed to feed. Badly. Many times. The chamfer had to be smoothed rounded and polished up to stop that. That lil mark is AFTER i modded the pistol

[@borandagio807]

@@SpeedyTube83 ahhh okay sorry, I completely misunderstood. If you made a video of your fix I’m sure the community would appreciate it! I’m looking to buy one and honestly your video is only one of two on KZbin. Great chance for some more views for your profile.

[@SpeedyTube83]

@@borandagio807 i did a video for remachining the feed ramp to 31.5° because early 45acp tisas were not machined at the right angle...(they were too shallow and not steep enough) and people told me i was wrong and theirs is fine and etc.....on a video i made trying to help people understand their feed issue lol. Everyone is a critic!

[@2a2day]

What magwell you running in the 45 carry?

[@SpeedyTube83]

Klonimus on all 3 now. They ROCK and so do their grips.

[@2a2day]

@@SpeedyTube83 I can’t find a klonimus website. What retailer did you use?

[@SpeedyTube83]

@@2a2day have to get em on ebay

[@destroyingdadxx2274]

Thanks for the video but I’m no gunsmith so I want a gun that works out of the box. It doesn’t sound like these do based on your comments.

[@SpeedyTube83]

They dont but they are $5-800 1911s so theres gonna be issues and i enjoy making them run, knowing they will have some quirks. The features you get offset that

[@HMRSMPSN69]

I've got 4, zero issues straight outta the box

[@patrickmcdowell4933]

I own 3 Tisas and I have never had one issue with any of them. They chew any ammo including steel cased and hollow points.

[@destroyingdadxx2274]

Well I just picked up a D10 myself and so far zero issues. It seems to be well made and shoots great.

[@xaybossvt9199]

What sounds that 10mm make? 😂

[@papashakeshake6268]

sig p220...

[@williamheizer1891]

Three more contributions to an enemy of this country !

[@SpeedyTube83]

Turkey has hurt us less than we have hurt us. Nobody is more an enemy to us than the man. Lol.

[@jamesh1641]

Turkey has been a NATO member since 1952. Land Command is HQ’d there.

[@davidbillings1863]

I don’t buy new guns to have to “ tinker “ on them.

[@andreawhalen4142]

tisas 1911s are rattle traps

[@SpeedyTube83]

They are $500 1911s. Ps you ever feel a 1911 that was in service? I have. Same thing. Also my 45s are broken in and smooth!

[@andreawhalen4142]

@@SpeedyTube83 yeah i was issued one back then, yes they are loose, and yes i don't like them.

[@highsecurityagent8778]

The Tisas OD green 1911A1 GOVERNMENT WW2 45acp locks up pretty good.

[@supersixbravo1610]

Dude, put on a pair of gloves or give your hands and fingernails a good cleaning before you shoot your videos. I'll go down better with folks.

[@turboz6828]

Those are working gun hands.

[@phxamigo]

Does the D10 10mm have a ramped barrel? thanks

[@SpeedyTube83]

Yes its just like a 9mm with an integral feedramp.

[@phxamigo]

@@SpeedyTube83 Thank You

[@connormarek1028]

​@@SpeedyTube83 Fantastic!!! I was wondering that as well. I hope there will be more reviews on the D10. I might just get one ;)