It's official.. You are my second favorite aussie right behind Huge Jackman :) love your videos.
@shadowreaver185111 ай бұрын
I really appreciated this video. I've tried to mod my longshot several times, all ending in failure. I had all the right parts but there aren't many detailed mod guides out there. The video was very instructive and thanks to this guide I finally figured out where I went wrong and successfully upgraded my longshot.
@Lankythepyro3 жыл бұрын
I was thinking of getting this exact kit with this exact spring. This is precisely the result I was hoping for
@Relaxed0201Ай бұрын
How much does it cost and where can I find it? The link in His description doesn't work
@streettrash42206 жыл бұрын
I was just looking at the worker kit site for the aluminum bolt sled. Looks like they listened to you about the pin. Their description says “.Replace original all-metal CNC bolt pin with screw type, is not easy to slide out.” I already upgraded my alpha plastic trigger with the pink worker one. I had to mod the xzeus shell a bit to fit it, but i had already cut jam doors so no biggie. It’s night and day though. So much better. Wow. Next up will be the bolt sled for matchy pink goodness with no tape required.
@BradleyPhillipsYT6 жыл бұрын
Street Trash, there's an artifact trigger (new one) that fits the Xzeus 2 shell with out cutting
@streettrash42206 жыл бұрын
Bradley Phillips lame. I had no idea. I already modified it though so oh well. It was nothing structural, and I can always glue in some micarta block spacers if I need to use a different trigger for some reason. Mcmaster’s has micarta for pretty cheap.
@Load_the_ducks6 жыл бұрын
I like the new style, but I think I do prefer the post commentary. It's more concise.
@ALPHA.Mods.16 жыл бұрын
the shell is made of two different shells! cool!
@blobfishiant84873 жыл бұрын
Ik it seems like a really weird observation but I really like the sound of the birds in this video
@JosephArata6 жыл бұрын
The Omega kit is going to be capable of spring loads higher than 20 kg, intrinsically though. If you were interested in creating a target shooting Longshot or XZeus. Where rate of fire isn't a concern.
@BradleyPhillipsYT6 жыл бұрын
Batojiri1, I personally wouldn't consider going above Turf 10kg with the Omega until Jet release some longer barrels. What alpha hits with 16kg, a brass sleeper breech can do with less.
@BradleyPhillipsYT6 жыл бұрын
Jet have warranty rated Omega to some ridiculously high number, so Jet says so.
@JosephArata6 жыл бұрын
Agreed, barrel length will be a problem if you aren't going to go source your own Aluminum pipe and cut threads on it to adapt it to the kit. At least without waiting for Jet Blaster to release specific sizes for specific spring loads.
@CdoGtheGreat6 жыл бұрын
It would be really cool if you did a video showing the difference in FPS with barrel length. I would give two likes (one from each account) I know it aint much of a "payment" but I thought it would be worth asking.
@BradleyPhillipsYT6 жыл бұрын
Jet Blaster have some different size barrels they're planning to send me to test so look out for that video because I'm definitely going to run Omega through its paces with 18.5kg spring too.
@MongooseJakeNerf5 жыл бұрын
Hadn't watched this previously. I have that kit (mostly, I did not order the pusher intentionally so I could run it with full lengths), and it was nice to see your thoughts on some of the parts. That kit is hitting about the same FPS as my modded Buzz Bee Snipe is when firing full lengths on a 7kg spring.
@jforgeuk17666 жыл бұрын
Hey Brad, will you ever consider making a video/review/overview of the caliburn. I really want to see your opinion on it, and in comparison to the prophecy
@BradleyPhillipsYT6 жыл бұрын
Jack Phillips, I'd review it if I had one. I don't have a huge desire to buy one though currently.
@dracon57006 жыл бұрын
lol you should just link to the thread discussion from the other day.
@superwakky29475 жыл бұрын
Bradley Phillips you could see if worker would send you one
@GrimzNerfWorks5 жыл бұрын
Where do you get the turf springs from I can’t find them anywhere
@zagnerok6 жыл бұрын
Nice vid dude i really need to know. About thos product :)
@seniorxj29316 жыл бұрын
When's your Stryfe build gonna come out?
@BradleyPhillipsYT6 жыл бұрын
Senior XJ, I have it here. It works. But won't feed ACC darts, rips the heads off every Worker dart and only really likes Mengun half lengths. That's good for me though because I'm probably going to switch to an all half-length Mengun load out but I do need to wait for my shipment of them to arrive. I find the accuracy is the same as Worker without the head loss.
@seniorxj29316 жыл бұрын
Bradley Phillips,, half lengthen darts in a stryfe? I'm guessing your using a DRS cage since your main thing is accuracy..
@BradleyPhillipsYT6 жыл бұрын
Actually using Morpheus with 41.5mm crush and high concavity wheels
@seniorxj29316 жыл бұрын
Bradley Phillips,, I'm running the same cage with the aluminum guide. Mine is a 42.5mm with worker wheels and it's tearing heads off a lot of my accufakes. I then bought insutanto wheels from out of darts thinking the worker grooves were to blame but the same happened.
@RastaBot6 жыл бұрын
Im liking the rose gold color, I just purchased the sled and its on its way. I might have to get the whole kit. Are you going to do videos with different spring loads like you did with the Alpha Kit?
@BradleyPhillipsYT6 жыл бұрын
RastaBot, I might do a video with 16kg or something to see what it hits but with the loose fit barrel and short length I foresee diminishing returns above 10kg and not much gains above 200ft/s.
@gabbiyobro40206 жыл бұрын
The Xcortech Chronograph is a good Chronograph!!! I have it my self:-)
@BradleyPhillipsYT6 жыл бұрын
Gabbi Yobro, first time using it in this video. Straight out of the box!
@gabbiyobro40206 жыл бұрын
Aaah... cool!!!
@timzchannel19606 жыл бұрын
This was great.! the film editing was awesome as well hope you do more installation videos , especially when the OMEGA comes out.! Hope your GF will get a sight cam too :D
@BradleyPhillipsYT6 жыл бұрын
timZ Channel, I might put my scope cam on her blaster sometime but I don't think she'd be caught dead wearing a helmet
@ashleeellis23616 жыл бұрын
I'll pass on the helmet hair thanks. And the footage would suck anyway haha
@timzchannel19606 жыл бұрын
Haha..!
@JamieTenikoff6 жыл бұрын
Lol Tim, Brad already looks ridiculous enough running around the field ;)
@timzchannel19606 жыл бұрын
Haha... Chill Tiger..! because when I watch his footage I keep seeing & hearing "Hit Tiger" ..! Joking.. your group must have a lot of fun... Appreciate both your videos and passion for Nerf. The Nerf community can't wait for the next videos. Hope to visit one day and join the Nerf wars. :D
@gabbiyobro40206 жыл бұрын
Awesome vid man!!!!! Liked:-) Btw can a stock longshot plungertube handle a 14kg spring?
@BradleyPhillipsYT6 жыл бұрын
Gabbi Yobro, the plunger tube itself can. I'd upgrade the sled though.
@gabbiyobro40206 жыл бұрын
So a metal sled? With sled do you mean the bolt sled??Btw don`t you have to get a metal catch as well as a stronger catch spring? And is it necessary to get a metal trigger?
@Juan-nz1gu3 жыл бұрын
Is this a good replacement for a brass breech?
@XGeekabillyX6 жыл бұрын
How was the air seal? Any E-tape etc added post video? Also what about function vs price? Great video as always
@BradleyPhillipsYT6 жыл бұрын
Jordan Leitner, I upgraded the pusher oring to a thicker one. Other than that I haven't done anything not shown in the video. In terms of cost I'd say it aligns well with what it's missing compared to the omega kit preorder price of $130USD. It lacks a plunger rod, plunger tube, or metal trigger. It also requires shell work.
@Pierre8456 жыл бұрын
I'm pretty confident the omega kit will be superior to this. I'd say this was more comparable to the hunter kit
@BradleyPhillipsYT6 жыл бұрын
Foam Alliance UK, this seems like a Hunter Kit Mk2.
@Pierre8456 жыл бұрын
Bradley Phillips I think worker could have done better with this
@wallafied5 жыл бұрын
Thankyou brad for all your vids. I’ve learnt a hell of a lot from watching most of not all of them. Cheers I have the complete worker kit including the 18.5kg worker spring that came with it in a xzeus2 shell. But it’s a 200 to 210fps gun with worker darts. I’m a little disappointed. I’ve ordered a 16.5kg spring from BlasterTECH as I’ve been impressed with their 8kg spring, (180 to 200fps in my custom stainless steel barrel and breech longshot I made). To the point I spose hahaha, is the 16.5 BT spring as good as the turf 16kg spring you seem to love the most?
@BradleyPhillipsYT5 жыл бұрын
By the looks of their fps claims, it seems about equal to a Turf 16kg spring.
@wallafied5 жыл бұрын
Bradley Phillips I’ll soon see I spose. If it’s not up to task I’ll just get another Zeus with a ls omega kit. But jet blaster are always sold out of near on everything. It’s a bit of a joke. Oh and try a worker 9kg retaliator spring in your cycloneshock by itself. It’s a little bigger in ID so runs over the plunger rod without binding. 120fps average with worker darts can hit 140 when you find the perfect dart. ACC darts 140fps. Pity I can’t attach a vid to the comments to show
@metanoba40995 жыл бұрын
Could this work with the jet blaster’s Omni kit because I nerf with people who are scared of Stefans and I don’t want to hurt them so I hope to use full length darts
@extramile33825 жыл бұрын
Hello Brad, what will be your recommendation for optimum barrel length of the same setup on ZS LS body + worker blue LS tube + worker 22kg spring? Thanks.
@seal36266 жыл бұрын
What's the main advantage to having a threaded pin on the boltsled?
@BradleyPhillipsYT6 жыл бұрын
Turquoise Seal, super easy to remove and install. The artifact one uses a phillips head screwdriver bolt.
@seal36266 жыл бұрын
Bradley Phillips So more of an inconvenience then? Or is it a design flaw, E.G.: it lets the bolt slide out easily or etc?
@Gman762574 жыл бұрын
Where can I get an artifact bolt sled??
@BradleyPhillipsYT4 жыл бұрын
Probably try Monkeemods
@Gman762574 жыл бұрын
Bradley Phillips ok thank you
@zagnerok6 жыл бұрын
Strange the spring catch didn't fit at all in my friends xzeus it always bent following the curve body of xzeus shell ho did u do that @_@"
@damiandiaz68615 жыл бұрын
What spring did u use. Did u have to change the spring on the trigger?
@BradleyPhillipsYT5 жыл бұрын
I think I used a 16kg Turf spring. No you don't have to change the spring on the trigger, just the spring on the catch which is provided.
@damiandiaz68615 жыл бұрын
@@BradleyPhillipsYT How much does it cost?
@lolol.y79356 жыл бұрын
Can this kit be used with full lenght darts ?
@brucehkv57576 жыл бұрын
The Ceda is out, when are you going to review it?
@BradleyPhillipsYT6 жыл бұрын
BRUCEHKV, it's not actually been sent out to people yet. Jet say end of May preorders should be sent. The photos Jet have shown are just samples they have.
@1969cmp4 жыл бұрын
Hmmm...😎
@HiepLe-pe5hu5 жыл бұрын
Did you find the o-ring was too thick
@alducentekritztravy4946 жыл бұрын
Is it better.than the roboman boltsled?
@BradleyPhillipsYT6 жыл бұрын
Gengi Asto, I don't think anything would beat the Roboman sled except that custom one that Drac featured. It does match Artifact in build quality though by the looks other than lack of a threaded bolt pin.
@teunr50426 жыл бұрын
How does this kit compare to the hunterkit?
@BradleyPhillipsYT6 жыл бұрын
Teun Roetman, I'd call it Hunter Kit Mk2 but I've never owned one of those.
@woah89326 жыл бұрын
Will there bra review of the new OMW stuff ?
@BradleyPhillipsYT6 жыл бұрын
Lwow Gaming, not really planning on getting that. Parts of it are 3D printed which I don't like.
@dracon57006 жыл бұрын
do you have any plans to review the new OMW printed kit?
@BradleyPhillipsYT6 жыл бұрын
dracon5700, not really. I know there is another KZbin who has made a video on it though. 3D print just doesn't sound very durable to me.
@dracon57006 жыл бұрын
its STL printed, so it uses a kind of resin i think, but its is supposed to be pretty durable. thanks for the feedback tho
@BradleyPhillipsYT6 жыл бұрын
I only got this because it's a metal kit. I've sold all of my alpha kits ready for Omega. Had a few break where the pusher joins to the sled so not even a fan of molded ABS anymore.
@dracon57006 жыл бұрын
you do put your blasters through a ton more use than the average person would, and in a harsh environment at that, so it makes sense. i am looking at maybe getting an Omega kit to replace my brass breech system that I have because it eats darts and snaps boltsleds. That being said, I will probs wait for your review before buying the omega kit tbqh. I am a pre-med student so money is a factor for me.
@BradleyPhillipsYT6 жыл бұрын
I preordered an omega at the cheaper price so I'll definitely be reviewing it. My brass breech blasters all have metal sleds, metal catches, metal end caps, etc. and made by people who are really good at brass breeches so don't chew darts.
@A1dan_126 жыл бұрын
How long can the stock XZeus 2 sled take 8kg Nerf Turf with the worker kit and w/out reinforcement bars? Not using the worker sled
@BradleyPhillipsYT6 жыл бұрын
Phantom Mods, never tried it but I wouldn't think it can take it. Will probably break.
@A1dan_126 жыл бұрын
Would reinforcing that hold up and apparently its as strong as the stock ZS LS sled with no reinforcement
@BradleyPhillipsYT6 жыл бұрын
I'd reinforce it with some sheet metal
@A1dan_126 жыл бұрын
Bradley Phillips is that any different then Spence’s reinforcement bars in terms of. Strength
@seanshepard24015 жыл бұрын
My stock xzues2 sled has been managing 12.5kg for about 3 months now.
@ALPHA.Mods.16 жыл бұрын
are you getting the omega kit?
@ollllsdacrazy4 жыл бұрын
Serious question, what lube do you use?
@BradleyPhillipsYT4 жыл бұрын
Inox MX6
@5AUC35 жыл бұрын
how heavy of a spring can this kit take?
@BradleyPhillipsYT5 жыл бұрын
Probably up to 18kg since the key parts are metal
@5AUC35 жыл бұрын
@@BradleyPhillipsYT Thanks! if i ever get my hands on a longshot im deffenatly getting this
@DeCCofficial4 жыл бұрын
his voice is nicer than david attenbourough no cap
@Bobby-cl4cp6 жыл бұрын
What Camera is that?
@BradleyPhillipsYT6 жыл бұрын
Bobsi2006, Nikon D500
@Bobby-cl4cp6 жыл бұрын
Thank you very much sir, will buy that camera when i have enough money!
@GrimzNerfWorks5 жыл бұрын
Where do you get the turf springs from I can’t find them anywhere
@narenthebeesechurgerman4225 жыл бұрын
Hmmm, will a 13 kg catch with the included spring? How much fps with it
@BradleyPhillipsYT5 жыл бұрын
Yes it will catch, no idea what velocity a 13kg spring will get. I have never tried one.