Revisiting The Toler UNION

[@txtoolcrib]

Leatherman Store on Amazon - amzn.to/3PqrL1g Knipex Store on Amazon - amzn.to/3QLDQz8

[@maxlvledc]

Yea, I was listening closely and couldn't find a single thing I disagreed with. One thing I did learn when I took this on vacation was how well the wrench works on both chromed motorcycle bolts and brass square bolts (on a boat). As you said..the omnilock wrench was probably the best part of it.

[@TylerSnyder305]

If you thought that was the best part, maybe check out the folding clench wrench. They come in a 2 piece set, a large one and a smaller one. The Craftsman version of the set is no longer being made, but the crescent version is. I have the Craftsman set somewhere but have no clue where I put them.

[@Kleiner_Lutz]

I believe the word "unwieldy" was created to fit this.... thing

[@CanadianBeachcomber]

As an engineer and cabinetmaker, I have a drawer half full of unused gadget tools that have been gifted to me over the years.

[@JeffreyJamesMusic]

I finally got one after following the project since the beginning. You’re right the knippex combo.I can actually fit 2 small knippex (cobra and pliers wrench) and a fixit sticks screwdriver fit in the union case as well as a couple other tools. all of those tools do one thing very very well. And it’s a night and day difference from trying to use any multitool for that matter. I keep them in a small tool roll and if my gerber ambar won’t do the trick I just roll out the small kit for any quick repairs. I always have a dedicated pocket knife clipped in my front pocket so I don’t need that in a multitool. The Toler could have been just 2 wrenches and I’d have been happy. Maybe a driver that is self contained that can be stowed in the multitool. I think the slip wrench should be part of a metal holster that works with a few multitool models. Even then though, I have tried a lot of multi tools and always go back to a few small separate tools. The union might find a place in a bag with my jumper cables. I could see it saving my butt in a pinch if I somehow am without any tools on the road.

[@TylerSnyder305]

I think one of the problems is that many things have already been done and it's hard to get started in multitools without doing something completely different. Gerber went with slide out pliers, Kershaw locking pliers, SOG their gear system, and Sebertech the greatest mini multitools ever made. I don't think this was the way to go, but I do understand why he went overboard with it.

[@Better_Call_Bulba-Saur]

I like how the knife is just bolted on there like an afterthought 🤣

[@oldman975]

It’s not something I’d use for EDC,but I’d like to have one as a collector piece.

[@jeremiahbrady5296]

I carry a surge and knippex cobras and pliers wrench in my bag, it covers all my plier needs extremely well

[@mnight207]

Im not letting go of my surge

[@rogerpinch2698]

Any plans for a revisit on the Gerber dual force?

[@mad9579]

So sad I've been waiting for my order for 2 years and now I'm not expecting to be satisfied with it.

[@froglaps40]

I contributed on 1/6/21 for the Union, and am still awaiting to receive mine.. Edit, I received mine on 12/2/24... 1 month shy of 4 years. Rather awkward to use.

[@hackcult3738]

I ordered one back in 2020 and I just got mine last week. 😂

[@froglaps40]

@@hackcult3738 updates are lacking recently.. how do you like it? Was it worth the cost and wait?

[@brettmorton7365]

I was order no 5800ish and just got mine, early October '24 after a July '20 contribution.. and yes I'm rather underwhelmed

[@nickshipley4372]

Mine JUST shipped

[@froglaps40]

@nickshipley4372 i received a notice on the 27th, should be here Monday, possibly Tuesday knowing the usps.

[@ianbennett8747]

I’m embarrassed to say I’m an owner of this lump of metal. Piece of junk. Pretty much totally useless other than the blade, the reviewer in the video was being VERY kind, save your money for a better tool, first time you open the pliers you will be regretting this purchase. Bits fall out, saws suck, wrench is so cumbersome, pliers are tiny & constantly flip around. Ask for your money back if you are on the list, seeing the designer continue to push this as a quality product is starting to feel like a scam honestly.

[@maxlvledc]

I was wondering about this video, curious about your conclusions

[@txtoolcrib]

I hate being critical on this tool, but I have to call it like I see it.

[@steffrouen]

Where buy it please ?

[@anthonycampos7417]

I got my Union around the same time you uploaded a video showing you got one as well. I do agree with the majority of this review, the unit is quite bulky, heavy, finicky to unlock and get to other tools but it's still quite functional. Fits and carries multiple standard sized bits is a god send and not to mention has 2 T style diver set ups along with 2 L style driver set ups means it can deliver much more torque to it's driver than you'd expect. I got mine to change the wheels on my electric mountain board when out in the field and honestly it pulls that duty flawlessly so I am happy with my Union HOWEVER there are negatives I must mention. All the non coated parts of steel on the tool I have noticed started easily rusting, the knife blade is D2 (better that most other multitools) but it readily rusts as well. And finally the screws are too soft. I ended up stripping the knife pivot screw trying to take it apart for cleaning. If Toler could revise a few things and perhaps use better materials, I'd be much more enamored with it, but as of now I'm just mildly content with it.

[@Timbo868]

I wonder if there will be a version 2? 🤔

[@froglaps40]

@@Timbo868 maybe that'll come out on 2033.. lol

[@Asmodeous67]

Have you tried using the omnilock wrench with the needle nose section attached to it as a grip extender/cheater bar? Does that work is the connection point too delicate for that?

[@AquaTech225]

I would agree the leathermen an Knipex would be easier to use for work work. But my reason for backing it wasn’t to do work work with it. But to have a mix of things in one. Maybe more cumbersome. But a good mix of things. Solely to get me out of a pinch or bind. But to get me out of a jam for a moment when something is needing to be done. When I don’t have my actual tool bag on hand or with me that had all Knipex ect of actual tools made to get things done an make money with. So for a tool with a mix of different tools in one is to be expected to be kinda cumbersome an even a pain to work with. Hell I feel like that at times just with a regular leatherman charge. That’s just the same. There not really ment to be a work horse. But to give you the ability to get out of a jam. An have atleast most of the tools that could help to get out of the jam. So other than it being cumbersome like any multitool. You not saying much.

[@GeorgeZimmermen]

Still waiting for mine. Over 2 years.

[@GeorgeZimmermen]

Still waiting almost 3 years…..

[@GeorgeZimmermen]

Still waiting almost 4 years

[@GeorgeZimmermen]

Still waiting. Over 4 years

[@brettmorton7365]

4 years, 2 months and some change and I've just got mine (order 5800ish) and gotta say I'm rather underwhelmed

[@GeorgeZimmermen]

@@brettmorton7365 got mine in August. It’s terrible and one of the worst things I’ve ever spent my money on. I hate it

[@DJrainbizzles]

I pretty much bought this tool on the wrench + backing point for my work on cars. It seemed like a solid tool to leave in the glovebox, or take into the junkyard (I may find a use for that metal saw yet). But your criticism makes me wonder how well he could do if he tried to focus the scope more, like a more purpose built tool for car tinkering targeted at people like me.

[@willb3018]

That is an interesting conversation piece.

[@bilakos1987]

yup. You've hit the proverbial nail on the head. Less is more. I now edc a Knipex 6" pliers wrench, a 6" Cobra, a SAK, and a mini bit ratchet.

[@wiseguysshow1871]

To get more torque on the wrench you connect the tools to make a long handle

[@3x6Corvus]

Ok, so, after watching I mostly agree with everything. However, I backed it because I'm a welder, and all of these tools in this follow my convenience rule of "super good enough" between the slip wrench, pliers, bits, and in-line/t-handle/right angle screw driver, this thing is kinda perfect as a welder for a pocket tool. The pliers are perfect for snipping and pulling wire, wrench is perfect for tightening down hose lines. Is not big enough for gas lines unfortunately but it makes up for it by having everything else accessible. The one thing I'll say is that it's not super one hand open usable, which is annoying when you're busy, but you make due using your pants or something

[@williamli8708]

YOU GOT THIS TOLER! GO GET EM!

[@stevedriscoll2539]

I enjoyed that review. Interesting to see what people come up with. I would certainly not discard this tool if it was all I had. Individually some of these tools would get the job done, but together the thing is clunky. I hope the guy doesn't give up, though. I think what I like about my leathermans is that they are not clunky, they are kind of racy, and they work good for a lot of tasks.

[@weldtight]

Thanks for your review! I'm in the same park!!

[@MrSurvivalexpert]

Mine was a huge piece of 💩 also. Makes a great paper weight 👌

[@jwarehouse1]

I agree! He should make a small lighter tool around the wrench part!

[@dannym7783]

Good review. I agree with you the Toler Union is a good idea but to cumbersome to be practical. I have looked into buying one for over a year now and decided it is not the right tool for my needs. I am sure someone else my find the the tool useful to thier needs.

[@BenJohnsonDotNet]

It's pretty uncomfortable, unwieldy, and difficult to open/separate the halves, but it became second nature with a few dozen times of practice. I would never count on using this out in the field, but it should serve me well as my "better-than-nothing" tool that will sit on my desk. It's fun to play with, at least.

[@Willr47]

Do you still own the toler union? Im looking at buying one if you still have yours im willing to buy it.

[@Zaque-TV]

Seeing as this isn't a replacement for a full set of specialized tools the complexity of this seems like a nice item for your car go bag.

[@edwardfletcher7790]

This tool wouldn't fit a single nut or bolt in a modern car engine bay. It's crazy bulky like one of those horrible $10 Chinese hammer/pliers/knife/screwdriver tools....

[@AquaTech225]

@@edwardfletcher7790that’s not true in the least bit. Maybe not. But to say you can’t accomplish different things under the hood if needed be with it is complete bull. This is more of a maybe improve getting out of a jam tool an for smaller things. It’s not really ment to be a work horse. That’s when regular tools come into play. There’s things under the hood it can do. Just like any other multitool. An there’s many many things it can’t do under the hood. Just like any other multitool. Can’t figure out how so many of the comments bash it as much as they do. Like it’s ment to replace actual dedicated workhorse tools. It’s more like catching things you may run across if a tool bag isnt with you in a moment of something an it may get ya out the situation. Anything that’s to big for it to manage ya should probably be working that nut or bolt with a real dedicated tool for that task at that point anyway

[@edwardfletcher7790]

@@AquaTech225 Modern engine basis are very tight, this tool is ridiculously bulky, also all European cars use torx or allen socket head bolts. It's a badly made toy.

[@mjnz]

If anyone thinks Ben is bashing the Toler, I would actually differ by saying his kindness is on full display. He gives it far more credit than I would and reaches deep to find "something" good about it.

[@grandpa9607]

My pliers won't cut anything

[@aries758]

Много лишних слов 🤦‍♂️И как ты снял вторую часть мультитула?

[@Traderjoe]

I still never took my Toler Union out of the package. I can’t believe how disappointed I was seeing how it was actually made and the issues it has. I totally fell for the hype and promise of it. It remains the longest time I had to wait for a product from a crowd funding scheme and I will never do that again, regardless of how tempting it seems. I have a belief that these crowd funding sites are really owned by China and they take the designs that inventors are coming up with and gauging the interest they see and outright copy the popular designs and have them manufactured and sold on AliExpress at a sharp discount in an effort to bankrupt the inventors.

[@edubbya]

you’d be wrong

[@petergambino2129]

if the Super Tool 300 can't handle the job at hand, you need to get your Daddy's tools out.

[@mikemcgrath961]

I love the attention this tool is getting... It is ground breaking. Talk more

[@hackcult3738]

I ordered this multi tool back in 2020. I just received it a week ago. 😂

[@edwardfletcher7790]

Some Engineers seem to think human hands were designed in Minecraft... SIGH It's like some crazy competition where you can't have less than 30 functions ! You end up with something so big it SUCKS at 90% of the tasks. It's like what would happen if Gerber made a $300 tool.

[@VBtoonz]

Me too, just messaged him today for an update.

[@mikeofheavens]

This tool gives you anxiety

[@timwingers]

I feel like everyone has been trying to remake the mouse trap in the last 2 or 3 years, all trying to be the new "Leatherman Wave". You can't really beat the original.

[@tannerb9530]

I think this tool could have been great but fell far short when it came to the use of the tool

[@ToddESingleton]

I'll buy yours!

[@ChristianW1975]

It looks like an early stage prototype

[@tolertools4081]

I appreciate the coverage. I do think you're still missing some of the usability. For example, if you need to apply higher torque, please use the full length. It gives you more leverage and considerably less reaction force on your hand in a more comfortable position. Keep digging if you'd like. -Mike

[@txtoolcrib]

I will certainly try that, thank you for the information.

[@tennray]

I have refrained from saying anything about your tool since I got it. I was "highly critical" before due to how long it took to come out. I agree totally with Tx Tool Crib except I have found very little it is good for at all. Good idea too much crap piled together and its semi functional at best!

[@PoorWays]

Hi Mike, nice job on bringing another useful perspective on a multitool to your country. You did more to help this country in the industrial sector than many of us ever will!

[@RexH00ligan]

You expectations for a multi too might be too high. A multi tool is on you hip jic you need a tool when out-in-about mode. It was not ever intended to be the right tool when away from your toolbox. Its a tool you have in a pinch and you grade it like a tool for you toolbox.

[@choltzapple]

It was all constructive criticism, and valid. The maker can take this feedback and use it to make an even better tool in the future, and I hope he does.

[@bigneek714]

It’s unfortunate how poorly executed these things are. Also they should’ve produced it in the US. As the smaller Knipex stuff is SO popular within the EDC community, I think they could strip this tool down with a wrench

[@BackyardEngineer334]

I honestly wouldn’t take that tool if somebody gave it to me.

[@GeorgeZimmermen]

Wow! What a rebel you are…….

[@onlypatience]

The creator of this tool certainly tried hard, but in the end he wanted too much at once. The bag is reminiscent of a biker bag.

[@bjornanderson3645]

Damn this video is slow.

[@whiskersmcmeow6224]

Still no surge end cap from shapways. Slacking 💩

[@Burner-B]

This looks like it was designed to stand out. And not because of its quality, but just through virtue of looking different. And not good different, but 'rejected transformer' different. No need to reinvent the wheel... The tool orientation looks like it was designed by someone who has never used a single tool in his life, the cumbersome way to get to everything seems designed by someone who does not understand that ease of access is a key factor in multitool selection. If the designer had put the same amount of effort into making a quality tool with either a good allround toolset or a very jobspecific toolset he may not have gotten the amount of attention he got with this, but at least that attention wouldn't result in 'the guy needs to learn a lot before I hand him my money'.